Roborock Qrevo Curv Assembly Instructions and Parts Diagram
Section A: Component Breakdown
This section provides a detailed breakdown of the various components that make up the Roborock Qrevo Curv.
- A1: Main body casing.
- A2: Motor assembly, comprising sub-components A2-1 through A2-9.
- A3: Brush mechanism, including sub-components A3-1 through A3-10.
- A4: Wheels, identified as A4-1 and A4-2.
- A5: Sensor module.
- A6: Charging contacts, labeled A6-1 through A6-5.
- A7: Filter assembly.
- A8: Dustbin.
- A9: Water tank.
- A10: Main brush assembly, featuring a comprehensive set of sub-components labeled A10-1 through A10-20.
Section D: Filling Procedure
This section illustrates the correct and incorrect methods for filling a component, likely a water tank or reservoir.
Step D9 shows an incorrect filling method, indicated by a red cross ❌.
Step D10 shows the correct filling method, indicated by a checkmark ✔️, involving pouring liquid into the designated opening.
Steps D11, D12 (accompanied by the label 'FR', indicating French text), and D13 depict the attachment or insertion of various parts into the main unit.
Section B: Usage Scenarios
This section outlines various scenarios related to the operation or placement of the robotic vacuum, highlighting correct and incorrect usage.
Steps B1 through B1-2 illustrate incorrect placement or operation scenarios, marked with a red cross ❌, possibly showing the robot in unsuitable environments or situations.
Steps B2 through B4 depict correct or acceptable states and placements for the device.
Section C: Assembly Step
This section details a specific assembly action.
Step C1 shows a component (C1) being attached to the main unit.
Steps D1 through D1-8 illustrate a sequence of attaching or connecting various parts (D1, D1-1 to D1-8) to the main assembly.
Section D: Main Assembly Process
This section details the primary assembly process of the robotic vacuum cleaner.
Step D2 shows the placement of a component.
Steps D3 through D3-2 illustrate the attachment of a part.
Steps D4, D5, and its sub-components D5-1 through D5-4 show further assembly stages.
Steps D6 through D6-3 illustrate the attachment of brush components.
Steps D7 through D7-2 show the connection of various parts.
Steps D8 through D8-6 detail the final assembly of a module, potentially the main brush or drive system, with components labeled D8-1 through D8-6.
