Roborock Qrevo Edge Assembly Instructions and Parts Diagram
Detailed assembly instructions and parts diagram for the Roborock Qrevo Edge robot vacuum cleaner, illustrating components and assembly steps.
Part Identification (Section A)
This section identifies the various components of the Roborock Qrevo Edge.
A1: Robot Top View
Top view of the robot, showing internal components labeled A1-1 (e.g., sensor) through A1-8.
A2: Robot Underside View
Underside view of the robot, detailing internal components labeled A2-1 (e.g., wheel motor) through A2-9.
A3: Robot Exploded View
Exploded view of the robot's main body, illustrating parts A3-1 (e.g., top cover) through A3-10 (e.g., internal frame).
A4: Main Brush Assembly (Top)
Top view of the main brush assembly, showing the brush roller (A4-1) and its housing (A4-2).
A5: Main Brush Assembly (Side)
Side view of the main brush assembly.
A6: Side Brush Assembly
Side view of the side brush assembly, showing the brush (A6-1) and its mounting components (A6-2 through A6-5).
A7: Robot Chassis (Bottom)
Bottom view of the robot chassis, indicating mounting points for various components.
A8: Accessory
A small accessory, possibly a cleaning brush or tool.
A9: Charging Component
A component related to charging, such as a power adapter or connector block.
A10: Robot Underside Details
Detailed view of the robot's underside, highlighting the main brush, side brush, wheels, and other components labeled A10-1 through A10-18.
A11: Charging Dock Details
Detailed view of the charging dock, showing connection points and components labeled A11-1 (e.g., charging contacts) through A11-3 (e.g., dustbin emptying port).
Placement and Docking (Section B)
B1: Placement Guidelines
Illustrates correct and incorrect placement of the robot in a room.
- B1-1: Recommended placement with ample space around the robot. [✓]
- B1-2: Discouraged placement with obstructions close to the robot. [✗]
B2: Docking Procedure
Shows the robot docking with the charging station and dustbin emptying.
- B2-1: Robot's charging contacts aligning with the dock's contacts.
- B2-2: Robot moving towards the charging dock. [Arrow indicating direction]
- B2-3: Robot fully docked and charging.
- B2-4: Robot approaching the charging dock.
- B2-5: Robot docked, with the automatic dustbin emptying mechanism engaged.
B3: Docking Procedure (Alternative View)
Similar to B2, showing the robot docking and dustbin emptying.
- B3-1: Charging contacts on the robot and dock.
- B3-2: Robot aligning with the dock. [Arrow indicating direction]
- B3-3: Robot fully docked.
Dustbin Installation (Section C)
C1: Installing Dustbin into Dock
Illustrates the process of inserting the dustbin into the charging dock.
Assembly and Maintenance (Section D)
D1: Attaching Mop Holder
Shows the robot and the attachment of the mop pad holder.
- D1-1 to D1-4: Labeled parts for the mop system.
- D1-5: The base of the robot.
- D1-6: The mop pad holder being attached to the robot's underside. [Arrows indicating attachment]
- D1-7: Robot with the mop pad holder attached.
- D1-8: Robot with the mop pad attached to the holder.
D2: Mop System Attachment
Detailed view of the robot's underside and attachment points for the mop system.
- D2-1, D2-2: Labeled components for mop system attachment.
D3: Mop Pad Attachment
Process of attaching a component, likely the mop pad, to the robot.
- D3-1, D3-2: Labeled parts and visual steps for mop pad attachment.
D4: Robot with Mop Attached
Robot shown with the mop pad assembly attached.
D5: Mop Pad Installation
Installation of the mop pad onto the robot.
- D5-1 to D5-4: Labeled parts and sequential steps for mop pad installation.
D6: Mop Pad Holder Installation
Attaching the mop pad holder to the robot.
- D6-1, D6-2: Labeled parts and visual steps for mop pad holder installation.
D7: Mop Pad and Holder Attachment
Detailed view of the robot's underside showing the mop pad holder and mop pad being attached.
- D7-1, D7-2: Labeled parts and visual steps for attaching the mop pad and holder.
D8: Final Mop Pad Attachment
Final steps for attaching the mop pad to the robot's underside.
- D8-1 to D8-6: Labeled parts and sequential steps for mop pad attachment.
D9: Dustbin Insertion (Correct/Incorrect)
Correct and incorrect methods for inserting the dustbin into the charging dock.
- Correct insertion method: [✓]
- Incorrect insertion method: [✗]
D10: Inserting Dustbin
Illustration of the dustbin being inserted into the charging dock.
D11: Robot Placement on Dock
Robot being positioned onto the charging dock.
D12: Robot Docking Variations
Various views or steps for placing the robot onto the charging dock.
- D12-1: Robot alignment with the dock.
- D12-2: Robot placement on the dock.
- D12-3: Robot placement on the dock.
- D12-4: Robot placement on the dock.
D13: Mop Pad Attachment to Holder
Attaching the mop pads to the mop pad holders.
- D13-1: The mop pad holder.
- D13-2: Mop pads being attached to the holder. [Arrows indicating attachment]
- D13-3: Mop pads securely attached to the holder.
