SALNÖ Rattan Bench Assembly Instructions

Brand: IKEA

Product Code: AA-2401044-1

Parts List

6x Screw (Part #10099306) ?
2x Screw (Part #10055372) ?
3x Screw (Part #10101092) ?
3x Screw (Part #100104) ?
2x Dowel/Sleeve (Part #128780) ⚪
2x Screw (Part #153807) ?
1x Hex Key (Part #130445) ?
1x Hex Key (Part #100001) ?
12x Washer (Part #10096254) ⭕

Assembly Instructions

General Advice:

Assemble on a soft surface like a rug to prevent scratches. ⚠️ Avoid assembling directly on hard floors.
Ensure all parts are present before starting. ❓ If unsure, consult instructions or contact IKEA.

Step 1: Attach Side Frame Legs

Connect the side frame legs to the main seat frame.

Use 2x Screw (Part #153807) ? and the Hex Key (Part #100001) ?. Ensure the screw is inserted correctly and tightened securely.

⚠️ Ensure the screw head is flush and not over-tightened.

Step 2: Attach Front Support Bar

Connect the front support bar to the side frame.

Use 1x Screw (Part #100104) ?, 1x Washer (Part #10096254) ⭕, and the Hex Key (Part #100001) ?. Insert the screw through the washer and into the frame.

⚠️ Do not use Screw (Part #10101092) ? for this step. Ensure correct alignment.

Step 3: Position Base Frame

Carefully flip the assembled frame and position it onto the main seat structure.

The frame should rest on the designated points of the seat structure. ⬇️

Step 4: Attach Rear Support Bar

Connect the rear support bar to the side frames.

Use 2x Screw (Part #100104) ?, 2x Washer (Part #10096254) ⭕, and the Hex Key (Part #100001) ?. Insert screws through washers into the frame.

⚠️ Do not use Screw (Part #10101092) ? for this step. Ensure correct alignment.

Step 5: Attach Backrest Frame

Connect the backrest frame to the seat frame.

Use 2x Screw (Part #10055372) ? and the Hex Key (Part #100001) ?. Insert screws into the designated holes.

⚠️ Do not use Screw (Part #10099306) ? for this step. Ensure correct alignment.

Step 6: Attach Lower Backrest Supports

Attach the lower support bars to the backrest frame.

Use 3x Screw (Part #10101092) ? and the Hex Key (Part #100001) ?. Insert screws into the frame.

Step 7: Attach Upper Backrest Supports

Attach the upper support bars to the backrest frame.

Use 3x Screw (Part #10099306) ?, 3x Washer (Part #10096254) ⭕, and the Hex Key (Part #100001) ?. Insert screws through washers into the frame.

Step 8: Insert Leg Sleeves

Insert the sleeves into the bottom of the legs.

Use 2x Dowel/Sleeve (Part #128780) ⚪. Gently push them into the leg openings.

Step 9: Attach Armrests

Connect the armrests to the main frame.

Use 1x Screw (Part #10101092) ? and the Hex Key (Part #130445) ?. Insert the screw and tighten.

Step 10: Insert Additional Leg Sleeves

Insert more sleeves into the leg structure.

Use 3x Dowel/Sleeve (Part #128780) ⚪. Gently push them into the designated openings.

Step 11: Attach Top Backrest Supports

Attach the final backrest supports to the top of the backrest frame.

Use 3x Screw (Part #10099306) ?, 3x Washer (Part #10096254) ⭕, and the Hex Key (Part #100001) ?. Insert screws through washers into the frame.

Step 12: Attach Seat Frame Supports

Connect the seat frame supports to the main structure.

Use 2x Screw (Part #10101092) ? and the Hex Key (Part #100001) ?. Insert screws and tighten.

⚠️ Ensure correct alignment and do not over-tighten.

Step 13: Secure Main Frame

Final tightening of key frame connections.

Use 8x Screw (Part #100001) ? and the Hex Key (Part #100001) ? to secure the main frame components. Also use 1x Screw (Part #100001) ? for a central connection point.

⚠️ Ensure all connections are firm but do not strip the screws.

Step 14: Attach Adjustable Feet

Attach the adjustable feet to the bottom of the legs.

Use 2x Screw (Part #100001) ? and the Hex Key (Part #100001) ? for the first set of feet. Repeat for the second set of feet using another 2x Screw (Part #100001) ?.

⚠️ Ensure the feet are screwed in straight.

Final Adjustments

ℹ️ Important Information:

The bench is equipped with adjustable feet. ⬆️ ⬇️ Adjust the feet as needed to ensure the bench is stable and level on uneven surfaces.

	IKEA STOCKSUND Bench Assembly Instructions Step-by-step guide to assembling the IKEA STOCKSUND bench with storage, including attaching legs, fitting the cover, and securing the lid.
	NORRMANSÖ Outdoor Bench Assembly Instructions \| IKEA Step-by-step guide to assembling the IKEA NORRMANSÖ outdoor bench. Includes parts list, tools required, and detailed assembly steps for furniture.
	SJÄLLAND Outdoor Bench Assembly Instructions A comprehensive guide for assembling the IKEA SJÄLLAND outdoor bench, detailing parts, tools, and step-by-step instructions for a secure and correct build.
	JÄTTESTA TV Bench Assembly Instructions Step-by-step assembly guide for the IKEA JÄTTESTA TV bench, including essential safety warnings about preventing tip-over accidents and instructions for wall anchoring. Lists all necessary parts and tools.
	IKEA STOCKHOLM 2025 Shelving Unit/Bench Assembly Instructions Detailed step-by-step assembly guide for the IKEA STOCKHOLM 2025 shelving unit/bench, featuring an oak veneer finish and dimensions of 180x41x44 cm. Includes required tools, hardware, and assembly procedures.
	NORRMANSÖ Outdoor Bench Assembly Instructions Step-by-step assembly instructions for the IKEA NORRMANSÖ outdoor bench. Includes hardware list and detailed textual descriptions of assembly steps.
	STOCKHOLM 2025 TV Bench Assembly Instructions Step-by-step assembly instructions for the IKEA STOCKHOLM 2025 TV bench with sliding doors. Includes safety warnings, parts list, and assembly guidance.
	PINNIG Coat Rack with Shoe Storage Bench Assembly Instructions Official IKEA assembly instructions for the PINNIG coat rack with shoe storage bench. Learn how to safely assemble and install your PINNIG furniture, including important safety warnings and step-by-step guidance.