4ModernHome T239 Lamp Instruction Manual
Product: Table Lamp
Welcome & Support
Dear Customer,
Thank you for choosing 4ModernHome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4ModernHome!
Best regards,
[4ModernHome/Support Team]
Safety Information & Warnings
CAUTION: Risk of fire ?
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
General Warnings
If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
California Residents Proposition 65
Warning: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Electrical Installation Caution
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Product Overview & Parts
This document provides instructions for assembling the 4ModernHome T239 lamp. The lamp consists of several components that need to be assembled correctly.
Lamp Diagram Description
The lamp assembly involves connecting the following parts:
- Body (A): The base and main structure of the lamp.
- Lamp socket (B): Where the light bulb is installed.
- Saddle (C): A component that connects the harp to the body.
- Harp (D): Supports the lampshade.
- Shade (E): The lampshade that diffuses light.
- Finial (F): A decorative knob that secures the shade to the harp.
The power cord (labeled 'LN' in diagrams) connects to the lamp socket.
Applicable Bulb Type
Compatible bulb types include A19, A60, T45, ST58. Please note that the bulb is not included.
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
Assembly Instructions
- Unpack all parts from cartons carefully.
- During assembly, ensure the power cord is prevented from twisting.
- Stuff the power cord into the lamp socket (B), then tighten the lamp socket (B) into the body (A) until tight.
- Place the harp (D) onto the saddle (C).
- Place the shade (E) onto the harp (D).
- Tighten the Finial (F) into the harp (D) until tight.
