HOMCOM Mini Stepper Assembly & Instruction Manual
Model: A90-262
Part Number: INapc001V01_UK
Important Safety Information
Please keep this manual in a safe place for easy reference.
- It is important to read this entire manual before assembling and using the equipment.
- Before starting any exercise program you should consult your doctor to determine if you have any medical or physical conditions that could put your health and safety at risk, or prevent you from using the equipment properly.
- Keep children and pets away from the equipment. The equipment is designed for adult use only.
- Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 0.5 meters of free space all around it.
- Before using the equipment check that the nuts and bolts are securely tightened.
- Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in the equipment or that may restrict or prevent movement.
- The equipment is not suitable for therapeutic use. Suitable for home use only. Maximum weight of user: 100kg.
- DO NOT touch the Cylinder while doing exercises.
How to Use the Stepper
Let your feet get on the Foot pedals (#20), then you can step in place.
Warning
The right installation of (2) Rear tubing end piece.
Part List
| Part No. | Description | Q'ty |
|---|---|---|
| 1 | Main Base | 1 |
| 2 | End cap | 2 |
| 3 | Console | 1 |
| 4 | Magnet | 1 |
| 5 | Plastic bearing | 1 |
| 6 | Pivot | 1 |
| 7 | Hex Recessed Flat head Bolt M8X16 | 2 |
| 8 | Big abnormity washer | 1 |
| 9 | Foot base | 1 |
| 10 | Foot support (R) | 1 |
| 11 | Foot support (L) | 1 |
| 12 | Bushing | 2 |
| 13 | Snap ring | 4 |
| 14 | Nylon bearing | 4 |
| 15 | Bushing | 2 |
| 16 | Flat washer | 2 |
| 17 | Abnormity washer | 2 |
| 18 | Plastic cover | 2 |
| 19 | Hex Recessed Flat head Bolt M8X16 | 2 |
| 20 | Pedal (R) | 1 |
| 21 | Cross screw | 2 |
| 22 | Pedal (L) | 1 |
| 23 | Cylinder | 2 |
| 24 | Hex Recessed Flat head Bolt M8X40 | 2 |
| 25 | Washer | 4 |
| 26 | Lock nut | 2 |
| 27 | Rubber | 2 |
Exploded Drawing Description
The exploded drawing illustrates the assembly of the HOMCOM Mini Stepper. The main base (1) serves as the foundation. The primary frame structure, which includes the pivot (6) and foot base (9), connects to the main base. Two hydraulic cylinders (23) are mounted to the frame, providing resistance for the stepping motion. The right foot pedal (20) and left foot pedal (22) are attached to the cylinders and the frame, allowing users to step up and down. Various hardware components, such as Hex Recessed Flat head Bolts (7, 19, 24), Washers (8, 16, 17, 25), Lock nuts (26), Bushings (12, 15), and Nylon bearings (14), are used to securely connect these parts and ensure smooth operation. Plastic covers (18) and End caps (2) are used for finishing and protection. A console (3) is mounted on the frame to display workout data. Rubber components (27) are likely for grip or stability.
Computer Functions
Function Button
Press to select functions preset, or hold on can be total reset.
Functions
- STOP: When stop pedaling, "STOP" displays on LCD.
- STEP/MIN (or STRIDES/MIN): Display strides in every minute.
- SCAN: Scan each function in sequence.
- TIME: Determine the length of workout session.
- CALORIES: Show the calories burned.
- COUNT: Accumulate the number of strides during workout session.
Note
- Without any signal for a period of 4 minutes, the LCD display will shut off automatically, and all previous working values are total reset.
- When there is signal in, the monitor is auto power on.
- If improper display on monitor, please install the batteries to have a good result.
How to Remove Battery
- Pull out the computer from the equipment and place one SIZE-AAA battery into battery housing on back of monitor.
- Ensure the battery is correctly positioned and battery springs are in proper contact with the battery.
- Then put the computer back into the original place and make sure it is completely set down in position.
- Battery life is approx. 1 year under normal usage.
- If the display is illegible or only partial segments appear, remove batteries and wait 15 sec. before reinstalling.
- Removing the batteries will erase computer memory.
- If the step counter does not work, please carefully remove the computer and adjust the height of the sensor manually, until the computer can display the number of steps.
Warning
The battery is environmental, so the used battery should be thrown into the reference dustbin.
