BLUETTI User Manual

Just Power On: Cable P090D-7909

Compatible Models: EB120, EB150, EB180, EB240

Diagram shows a B230 battery pack with ports labeled [a: battery port], [b: plug pole], [c: switch], and [d: lock switch]. The cable connects to the power station's '7090 Input Port' labeled [f], with the pole labeled [e].

Connection Steps

1. Long press the power button of B230 or B300 for 2 seconds to TURN IT OFF.
2. Press the switch [c] and fully plug pole [b] of Cable P090D-7909 into the battery port [a] of B230 or B300 battery pack.
3. Push the switch [d] forward to lock the connection.
4. Plug the pole [e] into the 7090 Input Port [f] of the power station.
5. Long press the power button of B230 or B300 for over 5 seconds, and release after the LED indicator flashes.
6. Long press the power button of your power station to finish the connection.

Just Power On: How to Use P090D-XT90

Compatible Models: AC200/P, AC200MAX, EB200/P, PS200A

Diagram shows a B230 battery pack with ports labeled [a: battery port], [b: plug pole], [c: switch], and [d: lock switch]. The cable splits into 'Cable No.1' and 'Cable No.2'. Cable No.1 connects to the battery pack. Cable No.2 has a pole labeled [g] which plugs into the power station's 'PV Input Port' labeled [h].

Connection Steps

1. Long press the power button of B230 or B300 for 2 seconds to TURN IT OFF.
2. Press the switch [c] and fully plug pole [b] of Cable P090D-XT90 into the battery port [a] of B230 or B300 battery pack.
3. Push the switch [d] forward to lock the connection.
4. Connect Cable No.1 with Cable No.2.
5. Plug the pole [g] into the PV Input Port [h] of the power station.
6. Long press the power button of B230 or B300 for over 5 seconds, and release after the LED indicator flashes.
7. Long press the power button of your power station to turn it ON.
8. Tap "Settings" on homepage to set the DC Input Source to "PV" (for AC200/P, EB200) or "Others" (for PS200A, AC200MAX) to finish the connection.

Just Power On: How to Use P090D-MC4

Compatible Models: EP500Pro, AC300

Diagram shows a B300 battery pack with ports labeled [a: battery port], [b: plug pole], [c: switch], and [d: lock switch]. The cable splits into 'Cable No.1' and 'Cable No.2'. Cable No.1 connects to the battery pack. Cable No.2 has a pole labeled [g] which plugs into the power station's 'PV Input Port' labeled [h].

Connection Steps

1. Long press the power button of B300 for 2 seconds to TURN IT OFF.
2. Press the switch [c] and fully plug pole [b] of Cable P090D-MC4 into the battery port [a] of B300 battery pack.
3. Push the switch [d] forward to lock the connection.
4. Connect Cable No.1 with Cable No.2.
5. Plug the pole [g] into the PV Input Port [h] of the power station.
6. Long press the power button B300 for over 5 seconds, and release after the LED indicator flashes.
7. Long press the power button of your power station to turn it ON.
8. Tap "Settings" on homepage to set the DC Input Source to "Others" to finish the connection.

How to Quit the Connection

Methods

1. Long press the power button of B230 or B300 for 2 seconds to TURN IT OFF.
2. Push back the Switch [A] of the connected cable, press the Switch [B] and pull the cable out when the battery indicator of B230 or B300 stops flashing.

Diagram of a cable connector with two buttons labeled '[a: Button 01]' and '[b: Button 02]'.

Power Station Settings Examples

PS200A Settings

AC200MAX Settings

AC200P Settings

EP500Pro Settings