BLUETTI D050S DC Charging Enhancer User Manual
Just Power On
Extra Ways to Charge, Extra Fun
Enable more charging methods for the DC 7909 DC inlet.
Power Sources
- Car charging
- Solar charging (12-60V, 10A MAX)
- Lead-acid Battery charging
- Bluetti Batteries (B230 or B300)
Power Stations
- AC200/AC200P/AC200MAX: Extra Solar or Capacity via DC7909
- EB150/EB240: Car Input, Battery Input via DC7909
⚠️ WARNING: Before using this DC Charging Enhancer, please make sure that your devices can take DC input voltage higher than 58.8V, or this may cause irreversible damage.
EU REP: POWEROAK GmbH, Lindwurmstr. 114, 80337 München Germany. Mail: logi@bluetti.de
UK REP: POWEROAK ENERGY UK CO.,LTD, Suite 108 Chase Business Center 39-41 Chase Side London United Kingdom N14 5BP. Mail:poweroak.eu@bluetti.com
P/N:17.0303.0405-00A0
User Manual
Please read this manual before use and follow its guidance. Keep this manual for future reference.
Quick Guide
a. XT90-M Input Port: Adapt to power source, plug the cable ① or cable ② to achieve solar charging and car charging. Extra battery charging (B230 or B300 battery packs) requires an additional battery extension cable.
b. DC7909-F Plug: Easy plug to power the power station.
Instruction
Please observe the following instructions to ensure safety use:
- 01 Never disassemble or modify this product.
- 02 Keep D050S away from heat sources such as radiators and heaters.
- 03 Only original cables are recommended to operate on D050S.
- 04 DO NOT touch the product with wet hands.
- 05 Please place your after-sale requirement as the warranty card written to the vendor where you order the product.
In The Box
Standard Accessories
- DC Charging Enhancer D050S x1
- Solar Charging Cable (XT90-F to MC4) x1
- Car Charging Cable (XT90-F to Cigarette Lighter Plug) x1
- Lead acid battery charging cable (XT90 to Red Black clamp) x1
- User Manual x1
- Warranty Card x1
- Certificate x1
General Specs
Net Weight | 0.75kg / 1.65lbs |
---|---|
Dimensions | 234x117x60mm (9.2x4.6x2.3 inches) |
Ingress Protection Rating | IP20 |
Storage Environment Temperature | -20-40°C / -4-104°F |
Working Temperature | -10-40°C / 14-104°F |
Working Environment Humidity | 10%-85% |
Input
- DC: 12-60VDC, 10A MAX
Output
- DC: 16-58.8VDC, 8.2A MAX, 500W MAX
- Overload Power Protection: Supported
- Short Circuit Protection: Support
- Overvoltage protection voltage: Support