MOES Scene Switch User Manual

Features

Product Introduction

This scene switch is powered by battery and developed under ZigBee/Bluetooth communication. After connecting with a ZigBee/Bluetooth gateway and adding it to the Smart Life App, it allows users to quickly set scenes for specific rooms or living situations, such as 'Reading' or 'Movie'. The scene switch is a time and energy-saving alternative to traditional hard-wired switches. Its push-button design allows it to be stuck on walls or placed anywhere convenient.

Specification

Diagrams show the scene switch dimensions: 86mm x 86mm x 13mm for 1, 2, and 4-button models.

Scene Switch with Your Smart Home

Diagram illustrating a smart home setup: A MOES Scene Switch is shown connecting wirelessly to various smart devices including a Smart Bulb, Smart Plug, Smart Dimmer Switch, Traditional Bulb, Fan, and Smart Curtain, all integrated within a smart home ecosystem.

Installation

1. Push the panel to the left.

2. Open the cover and insert the CR2430 3V button battery into the battery slot.

After installation, press the button on the switch. The indicator will turn on, confirming that the switch is working correctly.

Fix it as Where as You Want

Images show the MOES Scene Switch installed in various locations: Bedroom, Living Room, Kitchen, and Bathroom, demonstrating its versatility in home decor.

Connection & Operation

Indicator LED

Pressing the button turns on the indicator LED. A quick flashing of the indicator signifies that the switch is in the process of network connecting.

Scene Switch Operate

Each button can be configured to control up to three different scenarios via the App:

• Single Click: Activate the 1st scene
• Double Click: Activate the 2nd scene
• Long Hold (5s): Activate the 3rd scene

To enter pair mode, press and hold the Reset Button for 10 seconds; the LEDs will flash quickly.

Diagrams illustrate button labels (Button 1, Button 2, Button 3, Button 4) and the Indicator LED on different switch configurations (1-button, 2-button, 4-button).

APP Operation

1. Download and install the App: Search for the App in your device's app store or scan the provided QR code on the package or manual.

2. Register and Login: If downloading for the first time, click the "register" button to create an account. If you already have an account, click the "login" button.

3. Add devices: Note that if you choose the ZigBee or Bluetooth version, a corresponding ZigBee or Bluetooth hub is required for connection before successful pairing. Connect the device to the power supply, then press and hold the Reset Button to put the device into network configuration mode. Ensure your mobile phone is connected to the network. Open the app, navigate to the "smart gateway" page, click "add subdevice", and then click "LED already blink".

4. Wait for device networking to succeed and click "DONE" to add the device. *NOTE: If you fail to add the device, please move the gateway closer to the product and reconnect the network after powering on.

5. After successfully connecting the network, you will see the Intelligent Gateway page. Choose your device (e.g., WIRELESS SWITCH 2) to enter the controlling page, then select "Add intelligence" to enter the setting mode.

6. Choose "Add condition" to select the controlling condition, such as "Single click", then choose "Add task" to select the controlling action.

7. Select the desired action, such as choosing the On/Off status of the switch.

8. Save your configuration. You can then use the scene switch to control your smart devices.

Screenshots are provided throughout these steps to guide the user through the app interface for device setup and scene creation.

SERVICE

MOES provides a two-year worry-free after-sales service (freight not included). Please do not alter the warranty service card to safeguard your rights. For service or questions, consult the distributor or contact MOES. Product quality problems occurring within 24 months from the date of receipt require the product and packaging for after-sales maintenance at the point of purchase. A maintenance fee may apply for damage caused by personal reasons.

MOES reserves the right to refuse warranty service under the following conditions:

• Products with damaged appearance, missing LOGO, or beyond the service term.
• Products that have been disassembled, injured, privately repaired, modified, or are missing parts.
• The circuit is burned, or the data cable or power interface is damaged.
• Products damaged by foreign matter intrusion (e.g., fluid, sand, dust, soot).

RECYCLING INFORMATION

Products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment, as designated by the government or local authorities. Correct disposal and recycling help prevent negative consequences for the environment and human health. Contact the installer or your local authority to find out where these collection points are and how they work.

Symbol description: ♻️ [WEEE Symbol] - Indicates separate collection for waste electrical and electronic equipment.

WARRANTY CARD

Product Information:

• Product Name: _________________________
• Product Type: _________________________
• Purchase Date: _________________________
• Warranty Period: _________________________
• Dealer Information: _________________________
• Customer's Name: _________________________
• Customer Phone: _________________________
• Customer Address: _________________________

Maintenance Records:

Follow us

Thank you for your support and purchase at MOES. We are here for your complete satisfaction and welcome you to share your great shopping experience. If you have any needs, please do not hesitate to contact us.

FOLLOW US

▶️ MOES.Official | f @moessmart | ◉ @moes_smart | ? @moes_smart | ? www.moes.net

UK REP: EVATOST CONSULTING LTD

Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR

Tel: +44-292-1680945

Email: contact@evatmaster.com

EC REP: AMZLAB GmbH

Address: Laubenhof 23, 45326 Essen

Made In China

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD

Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China

Tel: +86-577-57186815

After-sale Service: service@moeshouse.com