Moes Scene Switch User Manual

Product Overview

This document provides instructions for the Moes Scene Switch, a battery-powered device developed for ZigBee/Bluetooth communication. It allows users to quickly set scenes for specific rooms or living scenarios, such as 'Reading' or 'Movie', after connecting to a ZigBee/Bluetooth gateway and adding it to the Smart Life App.

The Scene Switch offers a time and energy-saving alternative to traditional hard-wired switches. Its push-button design allows it to be easily mounted on walls or placed anywhere convenient.

The device is available in 1, 2, 3, or 4 button configurations.

[Image description: Multiple Moes Scene Switch units are shown, illustrating the different button configurations (1, 2, 3, 4 buttons).]

Features

• ? Scene Setting
• ?️ Remote Control
• ? Battery Power
• ? Mechanical Push ON/OFF Switch

Specifications

[Diagram description: Physical dimensions of the scene switch are illustrated as 86mm x 86mm x 13mm. A CR2430 button battery is also depicted.]

Scene Switch with Your Smart Home

[Diagram description: An illustration shows how the Moes Scene Switch integrates into a smart home ecosystem. It depicts connections to various smart devices such as Smart Plugs, Smart Curtains, Smart Dimmer Switches, Smart Bulbs, and even traditional bulbs and fans, all managed through the smart home system.]

Installation

Mounting: Fix the switch wherever you want.

1. Push the panel to the left.
2. Open the cover and insert the CR2430 button battery into the battery slot.

After inserting the battery, press the button on the switch. The indicator LED will turn on, confirming the switch is working correctly.

[Image description: A step-by-step visual guide for installation. Step 1 shows how to open the switch cover. Step 2 shows inserting the battery into the slot.]

Locations: Suitable for Bedroom, Living Room, Kitchen, Bathroom.

Connection & Operation

Indicator LED

• Pressing the button turns on the indicator LED.
• A quickly flashing indicator LED signifies that the switch is in the process of network connection.

Scene Switch Operation

Each button can be configured to trigger up to three different scenarios via the Smart Life App:

• Single Click: Activates the 1st scene.
• Double Click: Activates the 2nd scene.
• Long Hold (5s): Activates the 3rd scene.

To enter pairing mode, press and hold the Reset Button for 10 seconds; the LEDs will flash quickly.

[Diagram description: A diagram shows the physical layout of the scene switch, highlighting the buttons (Button 1, Button 2, Button 3, Button 4) and the Indicator LED. Some buttons are labeled as 'Reset'.]

APP Operation

1. Download and Install the App: Search for the 'Smart Life' app in your app store or scan the QR code provided on the package or manual.

2. Register and Login: If it's your first time using the app, click the 'Register' button to create an account. If you already have an account, click 'Login'.

[Image description: App screenshots showing the login/registration screen.]

3. Add Devices:

Note: If you are using the ZigBee or Bluetooth version, a compatible ZigBee or Bluetooth hub is required for connection before successful pairing.

Connect the device to power. Press and hold the Reset Button to put the device into network configuration mode. Ensure your mobile phone is connected to the network. Open the Smart Life app, navigate to the 'Smart Gateway' page, click 'add subdevice', and then click 'LED already blink'.

[Image description: App screenshots showing the 'Add devices' process, including 'Search device' and 'Discovering nearby devices'.]

4. Wait for Networking: Wait for the device networking to succeed. Click 'DONE' to add the device successfully.

Note: If you fail to add the device, move the gateway closer to the product and reconnect the network after powering on.

[Image description: App screenshots showing the device being added and a confirmation of successful addition.]

5. Enter Controlling Page: After successfully connecting to the network, you will see the 'Intelligent Gateway' page. Choose 'WIRELESS SWITCH 2' to enter the controlling page, then select 'Add intelligence' to enter the setting mode.

[Image description: App screenshot showing the 'Intelligent Gateway' page and selecting the 'WIRELESS SWITCH 2'.]

6. Set Conditions and Actions: Choose 'Add condition' to select the controlling condition (e.g., 'Single click'). Then, choose 'Add task' to select the controlling action.

[Image description: App screenshots for 'Select Condition' (e.g., 'Bedroom', 'Living Room') and 'Select Action' (e.g., 'Switch M4 On/Off').]

7. Configure Actions: For example, select the On/Off status of the switch.

8. Save Configuration: Save your settings. You can then use the scene switch to control your lights and other smart devices.

[Image description: App screenshot showing saving the configured scene.]

[Image description: A 'Device Trigger' screen detailing how different button gestures (single click, double click, long hold) trigger specific actions, with examples like 'Button1 single click'.]

Follow Us

Thank you for your support and purchase from Moes. We are committed to your complete satisfaction. Please feel free to share your shopping experience with us.

If you have any further needs, please do not hesitate to contact us first, and we will try our best to meet your demands.

Social Media:

• @moessmart
• @moes_smart
• @moes_smart

Website: moes.net

Manufacturer & Distributor Information

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD

Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China

Tel: +86-577-57186815

Email: service@moeshouse.com

EU Representative: AMZLAB GmbH

Address: Laubenhof 23, 45326 Essen

Origin: Made In China