MOES Smart Button (ZT-SY-SR) - Instruction Manual

Product Introduction

The MOES Smart Button is a wireless switchgear developed based on the Zigbee protocol. It utilizes Zigbee technology for wireless communication, enabling on/off control of various loads such as LED, incandescent, fluorescent, and tungsten lamps. With a corresponding host (Zigbee gateway), users can perform remote control via mobile phones, offering convenience and practicality.

Specifications

*Available for selected models.

Safety Notice

• Do not disassemble, reassemble, modify, or attempt to repair this product yourself. This work should be performed by authorized professionals.
• Product batteries should be recycled and must be recycled or disposed of separately from household waste. Dispose of batteries according to local environmental regulations.

Battery Installation

Steps:

1. Remove the screw ? [Remove screw].
2. Install the CR2032 battery ? [Install battery]. Ensure correct polarity (+/-).
3. Install the cover ? [Install cover].

Diagrams show: 1. Removing a small screw. 2. Inserting a CR2032 battery into a compartment. 3. Placing the cover back on.

Reset / Pairing

Steps:

1. Remove the screw ? [Remove screw].
2. Hold the "RESET" button for 6 seconds ⏳ [Hold RESET 6s].
3. The LED will start flashing ? [LED flashing].
4. Install the cover ? [Install cover].

Diagrams show: 1. Removing a small screw. 2. A finger pressing and holding a button labeled "RESET" for 6 seconds. 3. An LED indicator on the device flashing. 4. Placing the cover back on.

Remote Mode Control

Control description under remote mode:

• Single Press: On
• Dual Press: Off
• Long Press (>3s): Dimming

Note: The above functions may differ depending on the model of the smart bulb or device being controlled.

Mode Swap

3 clicks: Swaps between Remote mode and Scenario mode.

Diagram shows a button being pressed three times, with arrows pointing to "Remote mode" and "Scenario mode".

Connecting to the MOES App

Note: If you have connected to a 5G WiFi network, please disconnect it first and connect to a 2.4G WiFi network for optimal compatibility.

Steps for connecting the APP to the device:

1. Download MOES App: Download the "MOES" application from the App Store or scan the QR code ? [Scan QR code]. The MOES App offers enhanced compatibility and features compared to Tuya Smart/Smart Life apps.
2. Registration or Log in: Enter the Register/Login interface. Tap "Register" to create an account using your phone number for verification and set a password. If you already have an account, choose "Log in".
3. Connect to Zigbee Gateway:
   • Ensure your MOES App is successfully connected to a Zigbee gateway.
   • Enter the gateway settings. Follow the app prompts to "Add subdevice". The LED should already be blinking. The connection process typically takes 10-120 seconds, depending on network conditions.
   • Once the device is successfully added, you can edit its name and enter the device page by clicking "Done".

Diagrams illustrate app interface steps for downloading, registering, and adding a sub-device to a Zigbee gateway.

Declaration of Conformity

WENZHOU NOVA NEW ENERGY CO.,LTD hereby declares that the radio equipment type ZT-SY-SR is in compliance with Directive 2014/53/EU, 2014/30/EU, 2011/65/EU.

The full text of the EU declaration of conformity is available at: https://www.moestech.com/blogs/news/zt-sy-sr

Warranty Card

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD

Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China

Tel: +86-577-57186815

After-sale Service: service@moeshouse.com

Product Information:

• Product Name: _________________________
• Product Type: _________________________
• Purchase Date: _________________________
• Warranty Period: _________________________
• Dealer Information: _________________________
• Customer's Name: _________________________
• Customer Phone: _________________________
• Customer Address: _________________________

Maintenance Records:

Service & Support

Thank you for your trust and support. MOES provides a two-year worry-free after-sales service (freight not included). Please do not alter the warranty service card.

For product quality problems within 24 months of receipt, please prepare the product and packaging for after-sales maintenance at the site or store of purchase. Personal damage may incur repair fees.

Warranty service may be refused for:

• Damaged appearance, missing LOGO, or expired service term.
• Disassembled, tampered with, privately repaired, modified, or missing parts.
• Burned circuits or damaged cables/interfaces.
• Damage from foreign matter intrusion (fluids, sand, dust, etc.).

For service or questions, consult the distributor or contact MOES.

Contact Information:

• E-CrossStu-GmbH (Germany): Mainzer Landstr. 69, 60329 Frankfurt am Main, Email: E-crossstu@web.de, Tel: +4969332967674
• EVATOST CONSULTING LTD (UK): Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR, Tel: +442921680945, Email: contact@evatmaster.com

Follow MOES on social media: @moes_smart, @moessmart, MOES.Official. Visit www.moes.net.

Recycling Information

Products marked with the WEEE symbol (Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect health and the environment, this equipment must be taken to designated collection points for electrical and electronic equipment. Correct disposal and recycling help prevent negative consequences for the environment and human health. Contact local authorities or installers for collection point information.