ASSEMBLY INSTRUCTION

Introduction

We believe you will absolutely love your new furniture. Please examine this product carefully. Any request for missing part or damage replacement must be received within 90 days of your receipt of the product. For any reason you want to return the product, please contact us directly before you decide to return your product to the retailer. Our Customer Service team can answer most concerns and can assist you with any questions you may have about your new product.

Have these ready when you email:

• Item Number
• PO #
• Purchaser Name
• Proof of Purchase
• Description of the problem and/or the Part Number needed

Replacements for missing or damaged parts or hardware are normally shipped within 3 to 5 business days. We thank you for your patience.

The item must be returned in good condition, in original box, with all original proof of purchase, parts and accessories, within the time frame specified by the retailer it was purchased from.

90-Day Limited Warranty Statement for Manufacturing Defects

Please read this Limited Warranty carefully. To maintain your Warranty, you will need to comply with the conditions stated here. This warranty is for manufacturing defects only and does not cover damages as a result of misuse.

1. Our products sold comply with the description contained in this Warranty. All parts and products are warranted 90-Day from the original date of delivery except: parts and products used for commercial, contract, rental trade, institutional, or any other non-residential purposes; parts and products that have not been maintained in accordance with the care recommendations provided; parts and products damaged resulting from the consumer's improper assembly; or parts and products that are damaged or defective due to normal wear and tear.

2. To exercise rights under this warranty, proper documentation, i.e., photography, purchase order number, manufacturer's bar code label, and/or any other pertinent information upon request is required. We reserve the right to repair or replace the product within the warranty period based upon the documentation received as support of a claim for consideration. We will not replace or repair any product if improper maintenance, improper handling, or improper use caused the damage. Any product sold from or modified by a Non-Authorized Dealer, Seller or Consumer will void the Warranty.

3. Cost of packaging and shipping to and from us is not covered by the warranty unless expressly arranged by us. This warranty does not extend to furniture that has been exchanged or replaced by us as settlement of an original claim of defective merchandise. This warranty does not extend to furniture that has been moved from delivery location on original purchase order.

We appreciate your business!

Part List

Hardware

Assembly Steps

STEP 1: Attach Headboard Legs

Align Headboard Leg (R) [3] and Headboard Leg (L) [4] with the corresponding mounting points on the Headboard [1]. Insert JCBB Screws [A] through the holes in the legs and into the headboard. Secure using L-Key [E]. Refer to STEP 1.1 and STEP 1.2 for back view details.

STEP 2: Attach Side Rails to Headboard

Connect Side Rails [5] to the assembled Headboard Legs [3, 4]. Use JCBC Screws [B] and L-Key [D] for attachment. Ensure the rails are securely fastened. Refer to STEP 2.2 for detail.

STEP 3: Attach Footboard

Attach the Footboard [2] to the other end of the Side Rails [5]. Use JCBB Screws [A] and L-Key [E] for this connection. Ensure alignment with the Side Rails.

STEP 4: Attach Side Rail Legs

Attach Side Rail Legs [6] to the underside of the Side Rails [5]. Use JCBB Screws [A] and L-Key [E] to secure them. This provides additional support.

STEP 5: Install Support Legs and Slat with Nuts

Attach Support Legs [9] (with hanger bolts) to the underside of the Side Rails [5]. Use hardware [F] for adjustable feet. Then, attach Slat with Nut [7] pieces across the frame. The diagram indicates this is done for two sections (x2).

STEP 6: Install Remaining Slats

Insert the remaining Slats [8] into the designated slots on the frame. Secure each slat using the Socket [11] pieces. The diagram shows 8x Slats [8] being secured with 12x Sockets [11] in total, with two sockets typically used per slat end.

STEP 7: Frame Assembly Check

Review the assembled frame, ensuring all Side Rails [5], Headboard [1], Footboard [2], and support structures are securely attached with the correct hardware.

STEP 8: Final Assembly and Completion

Confirm all Slats [8] and Center Supports [10] are correctly positioned and secured. The bed frame assembly is now complete.

Please contact service@casepiece.com for assistance.