Mi True Wireless Earbuds Basic User Manual

Charging the Earbuds

The earbuds will automatically start charging when placed in the charging case.

Charging the Charging Case

While charging, the indicator light will flash slowly. When charging is complete, the light will stay on.

Note: The earbuds are not active before the first use. To activate them, place the earbuds in the charging case and press the function button. We recommend fully charging the earbuds before first use.

Checking Earbud Battery Level

The earbud battery level can be checked in two ways:

1. While the earbuds are charging.
2. When removing the earbuds from the charging case or your ear.

If the earbud indicator light stays on for 5 seconds, the battery level is sufficient. If the indicator light flashes, the battery level is low and they should be charged immediately.

Checking Charging Case Battery Level

Open the charging case lid, or if the case lid is closed, press the function button. If the indicator light stays on for 5 seconds, the battery level is sufficient. If the indicator light flashes, the battery level is low and they should be charged immediately.

Connecting Earbuds to a New Device

1. Place the earbuds in the charging case, then press and hold the function button for 2 seconds. The charging case indicator light will start flashing, indicating the earbuds are waiting for connection.
2. Turn on the Bluetooth feature of the device to be connected, click on the connection named "Mi True Wireless Earbuds Basic" to connect. If a password is required, enter "0000".

Connecting Earbuds to Two Different Devices

1. Place one earbud in the charging case, then press and hold the function button for 2 seconds. Connect to device A with the earbud.
2. After the first earbud is connected to device A, remove the earbud from the charging case. Then, place the other earbud in the charging case and press and hold the function button for 2 seconds. Connect to device B with this earbud. This way, each earbud will be connected to a different device.

Note: Before using this feature, the earbud's connection history must be cleared.

Disconnecting

If the connected device's Bluetooth feature is turned off, or if the earbuds are out of range, the earbuds will automatically enter connection standby mode. If the earbuds remain unconnected for more than 10 minutes, they will enter sleep mode. When the earbuds are put back into the ears, they will exit sleep mode and enter connection standby mode.

Automatic Connection

When the earbuds are in the charging case, they will automatically connect to the last connected Bluetooth device when the case lid is opened. If there is no connection history, or if the earbuds cannot connect to any Bluetooth device, they will automatically enter connection standby mode.

Note: If the earbuds cannot automatically connect to a Bluetooth device, you will need to manually connect them to the desired Bluetooth device.

Due to the nature of Bluetooth signals, in environments with strong 2.4GHz electromagnetic interference, disconnections or inability to hear sound may occasionally occur.

Clearing Connection History

1. Place the earbuds in the charging case.
2. Press and hold the charging case's function button for 10 seconds. Release the button when the indicator light stays on.
3. The earbuds will restart and enter pairing mode. The previous connection history will be cleared.

CE Marking

Tiinlab declares that the Mi True Wireless Earbuds Basic radio equipment complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: https://www.mi.com/en/service/support/declaration.html

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause radio or television reception interference, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• --Reorient or relocate the receiving antenna.
• --Increase the separation between the device and the receiver.
• --Connect the device to an outlet on a circuit different from that to which the receiver is connected.
• --Consult the seller or an experienced radio/television technician for help.

Use a shielded cable for connections, as specified in Part 15, Subpart B, of the FCC Rules. Do not make any changes or modifications to the device other than those specified in the manual. If such changes or modifications are necessary, you must turn off the device.