⚠️ Important Information

Read Carefully

Keep This Information for Further Reference

General Guidelines

• Please read the following instruction carefully and use the product accordingly.
• Please keep this manual and hand it over when you transfer the product.
• This summary may not include every detail of all variations and considered steps. Please contact NITHO for further information and help when needed.

Notes

• Please follow the assembly instructions precisely and only use the product as intended.
• If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
• Prior to assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use product as damage or injury may occur.
• Please contact NITHO for assistance and replacement.
• During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
• It is suggested you regularly check the products bolts and connections to ensure safe use.
• Assemble the item on a soft flat and clean surface to avoid scratches and damage.

⚠️ Warnings

• During assembly, keep parts and packaging materials away from children and pets as there could cause injury and are a potential choking hazard.
• Avoid sharp objects or corrosive chemicals to prevent damage to the product.
• Please open the item slowly and cautiously to avoid pinching your hands by metal joints, especially children.

Components

Please check you have all the pieces listed below

Assembly Instructions

Step 1

Assemble the chair base. Insert casters (6) into the star base (4). Place the gas lift cylinder (8) and its cover (7) into the center of the star base (4).

Diagram Description: Shows the star base (4) with wheels (6) being inserted. The gas lift cylinder (8) and its cover (7) are shown being placed into the center.

Step 2

Prepare the seat. Attach the armrest mechanisms (3) and armrests (10) to the underside of the seat cushion (1) using screws (9) and the Hex Key (A).

Diagram Description: Shows the underside of the seat cushion (1). Armrest mechanisms (3) and armrests (10) are aligned, and screws (9) are being inserted with the Hex Key (A).

Step 3

Attach armrest brackets. Secure the armrest brackets (15) to the sides of the seat cushion (1) using screws (16) and the Hex Key (A).

Diagram Description: Shows the seat cushion (1) with armrest brackets (15) being attached using screws (16) and the Hex Key (A).

Step 4

Assemble the backrest. Attach the backrest frame (14) to the backrest support bar (13) using screws (17) and the Hex Key (A).

Diagram Description: Shows the backrest frame (14) and support bar (13) being joined with screws (17) and Hex Key (A).

Step 5

Connect seat and backrest. Place the assembled seat/backrest unit onto the gas lift cylinder (8) on the chair base (4).

Diagram Description: Shows the assembled seat/backrest unit being lowered onto the gas lift cylinder (8) which is attached to the chair base (4).

Step 6

Attach the backrest to the seat. Align the backrest (2) with the seat cushion (1) and secure it using screws (9) and the Hex Key (A).

Diagram Description: Shows the backrest (2) being attached to the seat cushion (1) using screws (9) and the Hex Key (A).

Step 7

Attach armrests. Mount the armrests (5 R/L) to the sides of the chair assembly using screws (17) and the Hex Key (A).

Diagram Description: Shows the armrests (5 R/L) being attached to the sides of the chair using screws (17) and the Hex Key (A).

Step 8

Add pillows. Attach the headrest pillow (11) and lumbar support pillow (12) to the backrest (2) using the provided straps.

Diagram Description: Shows the headrest pillow (11) and lumbar support pillow (12) being attached to the backrest (2) via straps.

Step 9

Final Check. The chair is now assembled. Ensure all screws are tightened.

Diagram Description: A complete view of the assembled NiTHO Halo Gaming Chair.