NITHO ACE GAMING CHAIR

QUICK START GUIDE

Model: GC-ACEC

Important Information

⚠️ IMPORTANT INFORMATION

READ CAREFULLY.

KEEP THIS INFORMATION FOR FURTHER REFERENCE.

General Guidelines

Please read the following instructions carefully and use the product accordingly.
Please keep this manual and hand it over when you transfer the product.
This summary may not include every detail of all variations and considered steps. Please contact NITHO when further information and help are needed.

Notes

Please follow the assembly instructions precisely and only use the product as intended.
If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
Prior to assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use the product as damage or injury may occur. Please contact NITHO for assistance and replacement.
During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
It is suggested you regularly check the product's bolts and connections to ensure safe use.
Assemble the item on a soft, flat, and clean surface to avoid scratches and damage.

Warnings

During assembly, keep parts and packaging materials away from children and pets as they could cause injury and are a potential choking hazard.
Avoid sharp objects or corrosive chemicals to prevent damage to the product.
Please open the item slowly and cautiously to avoid pinching your hands by metal joints, especially children.

Components

Please check you have all the pieces listed below:

Part	Description	Quantity
A	Allen Wrench	x 1
1	Backrest	x 1
2	Seat	x 1
3	Armrest Bracket (Seat Mechanism)	x 1
4	Chair Base (with casters)	x 1
5	Armrests (Left & Right)	x 1 set (R1&L1)
6	Casters	x 5
7	Gas Lift Cylinder	x 1
8	Gas Lift Cover	x 1
9	M8*25mm Screw	x 12
10	Armrest Screws	x 2
11	Headrest Pillow	x 1
12	Lumbar Pillow	x 1
13	Backrest Support Bar	x 1
14	Seat Cushion	x 1
15	Armrest Mounting Screws	x 2
16	M6*30mm Screw	x 6
17	M5*8mm Screw	x 3

Assembly Instructions

Step 1: Base Assembly
Insert the five casters (6) into the sockets on the chair base (4). Insert the gas lift cylinder (7) into the center hole of the chair base (4), followed by the gas lift cover (8) over the cylinder.
Step 2: Seat and Armrest Attachment (Part 1)
Align the seat mechanism (3) with the pre-drilled holes on the underside of the seat (2). Secure it using twelve M8*25mm screws (9) and the Allen wrench (A). Attach the armrests (5) to the sides of the seat (2) using two screws (10) and the Allen wrench (A) for each armrest.
Step 3: Backrest Support and Initial Backrest Attachment
Attach the backrest support bar (13) to the underside of the seat mechanism (3) using six M6*30mm screws (16) and the Allen wrench (A). Align the backrest (1) with the corresponding mounting points on the seat mechanism and the backrest support bar. Secure the backrest using three M5*8mm screws (17) and the Allen wrench (A).
Step 4: Final Armrest and Backrest Securing
Ensure the armrests (5) are correctly positioned and aligned with both the seat (2) and the backrest (1). Secure the armrests to the backrest using the remaining screws (17) and the Allen wrench (A). Verify all screws are snug but do not overtighten yet.
Step 5: Connecting Seat Assembly to Base
Carefully lift the assembled seat and backrest unit. Align the center hole of the seat mechanism (3) with the top of the gas lift cylinder (7) on the chair base (4). Lower the seat assembly onto the cylinder until it is firmly seated.
Step 6: Final Tightening
Once all components are assembled and the chair is upright, go back and fully tighten all screws securely. Ensure all parts are stable and properly aligned.
Step 7: Pillow Attachment
Attach the headrest pillow (11) and the lumbar pillow (12) to the backrest (1) using the integrated straps and buckles. Adjust their positions for comfort.

Service & Support

For any questions or support, please contact the NITHO Team at support@nitho.com or visit the official website at www.nitho.com.

NITHO GmbH - Victoriastrasse 3b - 86150 Augsburg - Germany

Models: GC-ACEC, GM3, GC-ACEC ACE Gaming Chair, GC-ACEC, ACE Gaming Chair, Gaming Chair, Chair

Google Docs
Google Drive
Download [pdf]
Download Optimized

File Info : application/pdf, 9 Pages, 6.27MB

GC-ACEC-K GM3 A4 MANUAL Adobe PDF library 17.00 Adobe Illustrator(R) 24.0

Related Documents

	Nitho Forge Gaming Chair GC-FRG1 Quick Start Guide Assembly and user guide for the Nitho Forge Gaming Chair (Model GC-FRG1), providing step-by-step instructions, component list, and important safety information.
	Nitho Raven Gaming Chair GC-RAVN Quick Start Guide Assembly instructions and important information for the Nitho Raven Gaming Chair (Model GC-RAVN). Learn how to assemble your gaming chair with this quick start guide.
	NiTHO WASP GAMING CHAIR QUICK START GUIDE Quick start guide for assembling the NiTHO WASP Gaming Chair (Model: GC-WASP). Includes component identification, step-by-step assembly instructions, and important safety information.
	NiTHO MC.II Mesh Chairs GC-MC2F Quick Start Guide Quick start guide and assembly instructions for the NiTHO MC.II Mesh Chairs, model GC-MC2F. Includes component list and step-by-step assembly guidance for easy setup.
	NITHO MC.I Mesh Chairs GC-MC1F Quick Start Guide Assembly instructions and user guide for the NITHO MC.I Mesh Chairs, model GC-MC1F. Includes component identification, step-by-step assembly, and important safety information.
	HALO GAMING CHAIR GC-HALO Quick Start Guide Concise assembly guide for the HALO GAMING CHAIR (Model: GC-HALO) by NiTHO. Includes parts list and step-by-step instructions for setting up your gaming chair.
	NITHO MATRIX V2 MESH CHAIRS GC-MC4F Quick Start Guide Comprehensive quick start guide for assembling the NITHO MATRIX V2 MESH CHAIRS (Model GC-MC4F). Includes component list, step-by-step instructions, and important safety information.
	NITHO DRIVE PRO ONE Quick Start Guide Get started quickly with the NITHO DRIVE PRO ONE racing wheel. This guide covers setup for PC, PlayStation, Xbox, and Nintendo Switch, detailing features like zero deadzone technology, metallic paddles, and analog pedals for an immersive racing experience.