NiTHO WASP GAMING CHAIR

QUICK START GUIDE

This document provides a quick start guide for assembling the NiTHO WASP Gaming Chair. Please follow these instructions carefully to ensure proper assembly and safe use.

Model: GC-WASP

⚠️ IMPORTANT INFORMATION

READ CAREFULLY. KEEP THIS INFORMATION FOR FURTHER REFERENCE.

GENERAL GUIDELINES

Please read the following instruction carefully and use the product accordingly.
Please keep this manual and hand it over when you transfer the product.
This summary may not include every detail of all variations and considered steps. Please contact NiTHO Team at support@nitho.com when further information and help are needed.

NOTES

Please follow the assembly instructions precisely and only use the product as intended.
If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.
Prior to assembly, please check the product for defects or missing accessories. If any defects are found or accessories are missing, do not use product as damage or injury may occur. Please contact NiTHO Team at support@nitho.com for assistance and replacement.
During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.
It is suggested you regularly check the products bolts and connections to ensure safe use.
Assemble the item on a flat and clean surface to avoid scratches and damage.

WARNINGS

During assembly, keep parts and packaging materials away from children and pets as there could cause injury and are a potential choking hazard.
Avoid sharp objects or corrosive chemicals to prevent damage to the product.
Please open the item slowly and cautiously to avoid pinching your hands by metal joints, especially children.

Components

Please check you have all the pieces listed below:

A x 1 (Backrest)

B x 1 (Seat)

C x 2 (Armrests - Left and Right)

D x 1 (Mechanism)

E x 1 (Headrest)

F x 1 (Gas Lift)

G x 1 (Chair Base with 5 Wheels)

H x 5 (Wheels)

I x 1 (Decorative Cover)

K x 4 (Screws)

L x 2 (Screws)

M x 6 (Screws)

N x 3 (Screws)

O x 4 (Allen Key)

Assembly Steps

Step 1

Insert the wheels (H) into the corresponding sockets on the chair base (G).

[Diagram: Chair base with five sockets, arrows indicating wheels being pushed into place.]

Step 2

Insert the gas lift (F) into the center of the chair base (G). Attach the dust cover (J) to the middle of the gas lift (F) as shown.

[Diagram: Chair base with gas lift being inserted downwards into the center column. A dust cover is shown being placed over the gas lift.]

Step 3

Attach the armrests (C) to the underside of the seat (B) using six M screws. Ensure the right armrest is attached to the right side of the seat and the left armrest to the left side.

[Diagram: Underside of the seat showing attachment points for armrests. Arrows indicate armrests being secured with screws.]

Step 4

Attach the mechanism (D) to the underside of the seat (B) using four K screws.

[Diagram: Underside of the seat showing the mechanism being attached with screws.]

Step 5

Attach the backrest (A) to the mechanism (D) on the seat assembly using three N screws.

[Diagram: Seat assembly with backrest being attached to the mechanism using screws.]

Step 6

Carefully place the assembled seat and backrest unit onto the gas lift (F) already inserted into the chair base (G).

[Diagram: Assembled seat/backrest unit being lowered onto the gas lift in the chair base.]

Step 7

Attach the headrest (E) to the top of the backrest (A) using two L screws.

[Diagram: Top of the backrest showing the headrest being attached with screws.]

Step 8

Attach the decorative cover (I) to the headrest (E) as shown.

[Diagram: Close-up of the headrest showing the decorative cover being fitted.]

Step 9

Your NiTHO WASP Gaming Chair is now assembled.

[Diagram: Illustration of the fully assembled gaming chair.]

NiTHO

www.nitho.com

SERVICE & SUPPORT

If you have any questions or require support, contact NiTHO Team at support@nitho.com or visit our website www.nitho.com.

NiTHO GmbH - Victoriastrasse 3b - 86150 Augsburg - Germany

[Instagram: NITHOGAMES][Facebook: NITHOGAMES]

	Nitho Forge Gaming Chair GC-FRG1 Quick Start Guide Assembly and user guide for the Nitho Forge Gaming Chair (Model GC-FRG1), providing step-by-step instructions, component list, and important safety information.
	Nitho Raven Gaming Chair GC-RAVN Quick Start Guide Assembly instructions and important information for the Nitho Raven Gaming Chair (Model GC-RAVN). Learn how to assemble your gaming chair with this quick start guide.
	NITHO ACE GAMING CHAIR GC-ACEC Quick Start Guide Comprehensive quick start guide for the NITHO ACE GAMING CHAIR (Model GC-ACEC), detailing components, assembly instructions, and important safety information for optimal setup and use.
	NiTHO MC.II Mesh Chairs GC-MC2F Quick Start Guide Quick start guide and assembly instructions for the NiTHO MC.II Mesh Chairs, model GC-MC2F. Includes component list and step-by-step assembly guidance for easy setup.
	NITHO MC.I Mesh Chairs GC-MC1F Quick Start Guide Assembly instructions and user guide for the NITHO MC.I Mesh Chairs, model GC-MC1F. Includes component identification, step-by-step assembly, and important safety information.
	HALO GAMING CHAIR GC-HALO Quick Start Guide Concise assembly guide for the HALO GAMING CHAIR (Model: GC-HALO) by NiTHO. Includes parts list and step-by-step instructions for setting up your gaming chair.
	NITHO MATRIX V2 MESH CHAIRS GC-MC4F Quick Start Guide Comprehensive quick start guide for assembling the NITHO MATRIX V2 MESH CHAIRS (Model GC-MC4F). Includes component list, step-by-step instructions, and important safety information.
	NITHO DRIVE PRO ONE Quick Start Guide Get started quickly with the NITHO DRIVE PRO ONE racing wheel. This guide covers setup for PC, PlayStation, Xbox, and Nintendo Switch, detailing features like zero deadzone technology, metallic paddles, and analog pedals for an immersive racing experience.