Murdock Drinking Fountain/Bottle Filler

Standard Features

Drinking Fountain

• Rough-Ins Match Other Manufacturer's for Easy Replacement
• EZ Door Filter, 30-Second Filter Replacement Option
• Child or Adult ADA Compliant (When Properly Installed)
• Apron and One-Piece Bottom Wrapper is Satin Finish Or Gray Powder Coat Finish
• Flexible, Low Flow, Antimicrobial, Anti-Rotation, Non-Squirt Bubbler
• Auto-Stop allows Cartridge and Strainer Service Without Removing Drinking Fountain Deck to Access Water Supply Stop
• Lead-Free

Bottle Filler

• Hands-Free Sensor Operation or Pushbutton Operated
• ADA Compliant
• 100-Mesh Inlet Strainer
• 120VAC/9.0VDC Plug-In Transformer, With -BF12 Only
• Laminar Flow Water Supply
• 1 GPM Fill Rate
• -BF12 Sensor Has a 20 Seconds Maximum Run Time

Suggested Specifications

Model A171400F-UG-VR-BF is a self-contained Drinking Fountain. Unit shall be activated by a Vandal Resistant, Chrome Plated Brass Pushbutton using less than 5 pounds of force. Lead-Free Flexible Bubbler shall deliver a 0.3 GPM flow, have an integrally designed non-squirt feature and operate on a water pressure range of 20-105 PSIG. Basin shall be constructed from 304 Stainless Steel and have an Integral Drain. Cabinet shall be Stainless Steel with Satin Finish or Galvanized/Galvannealed Steel with Gray Powder Coat Finish. Unit shall be certified to Public Law 111-380 [lead-free symbol] and NSF/ANSI/CAN 61. Fixture meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately.

Bottle Filler -BF11

Bottle Filling unit shall include Pushbutton Operated activation.

Bottle Filler -BF12

Bottle Filling unit shall include Sensor Operated activation with a 20 second maximum run time. Optional -BCD (Bottle Counter Display) indicates the quantity of 16 oz disposable Plastic Bottles saved from a land fill, displays the Water Filter status and includes LED Light to illuminate and brighten the Bottle Fill area when a Bottle is detected. Bottle Filler housing construction will be 20 gauge Stainless Steel with a satin finish and will also include components manufactured from Antimicrobial, impact resistant ABS. Bottle Filler shall provide approximately 1 GPM flow rate with a Laminar Flow Spout to minimize splashing.

Model Configurations

Note: Must Specify Model and Bottle Filler Type.

Must Specify Bottle Filler:

• -BF11: Bottle Filler with Pushbutton Operation
• -BF12: Bottle Filler with Sensor Operation
• -BF12-BAT: Bottle Filler with Battery Operated Sensor Operation (N/A With -BCD)
• -BF12-BCD: Bottle Filler with Sensor Operation with Bottle Counter Display

Options:

• -LOGO: Customer Specified Logo / Graphics (Additional costs may apply.)

Accessories:

• -WF1EZ: 1500-Gallon Capacity Easy Door Filter, 30-Second Replacement (Patent Pending)
• -WF3: 3000-Gallon Capacity Water Filter

Notes: 1 - Refer to Supplemental Submittal Sheet for details.

Compatible Mounting Support Carrier

Jay R. Smith Mfg. Co. Figure #0830 https://www.JRSmith.com

Diagram Description

The diagram shows a side view and front view of the A171-UG-VR-BF Series drinking fountain and bottle filler, with dimensions provided in inches and millimeters. Key components are labeled:

• A: 3/8" O.D. Supply Inlet
• B: Waste Outlet for P-Trap (by others, for provided 1-1/4" O.D. tailpiece)
• C: Electrical Service Rough-in
• D: 3/8" Hanger Bracket Punching, 6 places for anchoring hardware (by others)
• E: 1/4" Punching, 3 places for anchoring hardware (by others)
• F: Bottle Filler Sensor
• G: Pushbutton Cartridge
• H: 1-1/4" [32] O.D. Tailpiece for P-Trap (by others)
• I: Optional -BCT Bottle Counter
• J: Optional -WF1EZ, EZ Door Filter

General Notes:

• All dimensions are in inches [mm].
• Allow 4 inches [102 mm] minimum clearance per side for ventilation.
• Dimensions shown are for ADA adult height. Adjust vertical dimensions as necessary to comply with federal, state, & local codes.
• Stop valve, P-trap, & electrical outlet not supplied.
• Important: Fountain must be attached to the wall with appropriate anchor screws.

Dimensions are shown for reference only. Refer to product Installation Manual for complete details prior to rough-in.

Compliance and Standards

• Complies with the following standards:
• UPC (Uniform Plumbing Code)
• Federal Public Law 111-380 [lead-free symbol]
• NSF/ANSI/CAN 61
• [wheelchair symbol]

Product Information

Accessibility Compliance: Subject to local Code Enforcement Authority.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Company: Murdock Mfg. • 15125 Proctor Avenue • City of Industry, CA 91746 USA

Phone: 800-453-7465 or 626-333-2543

Website: www.murdockmfg.com

Product Warranty: Available. Contact Murdock Mfg. for details.

Manufacturer: Murdock Mfg., a Member of Morris Group International.

Revised: 01/17/2024