Murdock A151FG Series

Standard Features

• Child or Adult ADA Compliant (When Properly Installed)
• 14 Gauge 304 Stainless Steel
• Polished Stainless Steel, Anti-rotation, Non-Squirt Bubbler
• 100 Mesh Inlet Strainer
• Vandal Resistant Screws
• P-Trap
• Mounting Plate With Hardware (A0000000-MP1)

Suggested Specifications

The Model A151400S-FG is a wall-mounted, vandal-resistant drinking fountain constructed from 14-gauge, 304 stainless steel with a brushed finish. The unit is activated by a self-closing, front pushbutton requiring less than 5 pounds of force. It features an internally mounted valve with an adjustable stream regulator to control water flow. The bubbler is polished stainless steel with a non-squirt feature and operates within a water pressure range of 20-105 PSIG. The unit includes a uniquely designed, contoured bowl with an integral P-trap. It is certified to ANSI A117.1, Public Law 111-380 (NO-LEAD), CHSC 116875, and NSF/ANSI/CAN 61-2020, Section 9. The fixture meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately.

Rating: "RATED FOR INDOOR AND OUTDOOR USE"

Model Configuration

Model: (Must Specify)

Flexible Bubbler (Low Flow)

Lead-Free Stainless Steel Bubbler

Options

• -HP High polish (additional costs may be incurred)

Accessories

• -BP2 Back panel for single contoured fountain
• -WF1 1500 gallon capacity Water Filter (See Note *)
• -WF3000 3000 gallon capacity Water Filter (See Note *)
• A9100080-A 8 GPH Remote Water Chiller (Recommended to be with 10 Feet of Fixture)

* Note: For Optional -WF1 and -WF3000: Installer is responsible for remotely locating the water filter. Refer to Supplemental Submittal Sheets for details.

Compatible Mounting Support Carrier

Jay R. Smith Mfg. Co. Figure # 0824 https://www.JRSmith.com

Compliance and Certifications

Complies with the following standards:

• [UPC compliance symbol] UPC
• [Lead-free compliance symbol] Federal Public Law 111-380 (No Lead)
• [NSF/ANSI/CAN compliance symbol] NSF/ANSI/CAN 61-2020

Product Information

Product Warranty

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Manufacturer Information

Murdock® Mfg.

15125 Proctor Avenue • City of Industry, CA 91746 USA

Phone: 800-453-7465 • www.murdockmfg.com

Member of MORRIS GROUP INTERNATIONAL

Revised: 01/16/2024

Dimensional Overview

The drinking fountain is constructed from 14-gauge stainless steel. Key dimensions are provided in inches [MM]:

• Overall Height: 18" [458]
• Bowl Depth: 5" [118]
• Bowl Width: 12" [306]
• Approximate Height from floor to rim: 33.5" [851]
• Approximate Height from floor to bubbler: 37" [89]
• P-Trap: 1-1/4" [32] P-TRAP PROVIDED.

A graphical representation shows the fountain's layout and dimensions, including an accessibility symbol [ADA compliance symbol] indicating ADA compliance.

General Notes:

• All dimensions are in inches [MM].
• Dimensions shown are for recommended adult height. Vertical dimensions must be adjusted as necessary to comply with Federal, State, and Local codes.
• Stop valve is not provided.

Selection Summary and Approval

This section provides fields for specifying model numbers, options, company details, contact information, signature, title, date, and quantity for ordering or approval purposes. It also includes a note regarding manufacturing tolerances and potential changes without notice.

Note: All dimensions are subject to manufacturer's tolerance of plus or minus 1/4" nominal and subject to change without notice. Murdock® assumes no responsibility for use of void or superseded data. Dimensions may change with the addition of optional accessories.