Aurora EN-LEDD7512 75W 12V LED Driver

Product Overview

This document provides installation instructions and specifications for the Aurora EN-LEDD7512, a 75W, 12V Constant Voltage LED Driver.

Wiring Diagram and Connections

The driver features connections for both mains power input and 12V LED load output.

Wiring Diagram

Mains Connection:

Live (L): Connect to Brown wire.
Neutral (N): Connect to Blue wire.
Earth: Connect to Green/Yellow wire.

12V LED Load Connection:

LED+ (Positive): Connect to Brown wire.
LED- (Negative): Connect to Blue wire.

Ensure all connections are secure and polarity is observed.

Installation Steps

Step 1: Prepare connections. The driver includes terminals for mains input and LED output, with an ON/OFF indicator.
Step 2: Open terminal covers and prepare wires for insertion.
Step 3: Insert wires into the appropriate terminals.
Step 4: Connect mains supply (Brown to Live, Blue to Neutral, Green/Yellow to Earth) and 12V LED load (Blue to LED-, Brown to LED+).
Step 5: Securely close the terminal covers.
Step 6: Illustrates terminal connection detail.
Step 7: Final check of ON/OFF switch and connections.

Important Installation Information

Installation must be carried out by a qualified electrician in accordance with the latest edition of the National Wiring Regulations.
Ensure all electrical connections are tight with no loose strands, including factory-made connections.
Mains supply voltage is 220-240V AC 50/60Hz.
Correct polarity must be observed when connecting the driver to the load.
This driver may not be compatible with all dimmable LEDs. Please contact the sales office for compatibility information.

Manufacturer Information

Aurora Limited

6 Little Burrow, Burrowfields, Welwyn Garden City, AL7 4SW, United Kingdom

Environmental and Warranty

This product is compliant with relevant environmental regulations (e.g., WEEE). Please refer to the manufacturer's website or contact them for detailed warranty information and disposal instructions.

Compliance Marks

CE Mark: Indicates compliance with EU directives.

	Aurora 12V Constant Voltage 16W LED Driver Installation Guide Installation and safety guide for Aurora 12V Constant Voltage 16W LED Drivers (AU-LED16IP/AU-LED16T). Covers wiring, parallel connections, IP rating, lamp compatibility, and warranty information.
	Aurora Spryte LED Downlight Installation and Safety Guide Comprehensive guide for installing Aurora Spryte LED downlights, including safety precautions, electrical connections, dimming compatibility, and warranty information. Covers models EN-DL10160, DDL10160, DDL10260, and DDL1019.
	Aurora EN-DLM981X & EN-DLM982X Downlight Installation Guide Comprehensive installation instructions for Aurora EN-DLM981X and EN-DLM982X fire-rated downlights, detailing wiring, safety precautions, and usage guidelines.
	Aurora Flat Panel LED Installation Guide and Product Information Comprehensive guide for installing Aurora EdgeLite™ flat panel LED lights, covering wiring for dimmable and non-dimmable drivers, along with warranty and environmental compliance details.
	Aurora AU-DSPLED 1-10V Dimmer Switch Installation and Wiring Guide Comprehensive installation instructions and wiring diagrams for the Aurora AU-DSPLED 1-10V Dimmer Switch. Learn how to install and connect this rotary control dimmer for dimmable LED drivers and ballasts in 1-way and 2-way lighting circuits.
	Aurora EN-LN1230 & EN-LN1540 LED Luminaire Installation Guide Comprehensive installation guide for Aurora EN-LN1230 and EN-LN1540 LED luminaires, covering surface and suspension mounting, electrical connections, safety information, and warranty details.
	Aurora BatPac PRO Range LED Battens - Product Datasheet Comprehensive datasheet for Aurora's BatPac PRO Range LED Battens. Features include push-clip release, IK08 rating, and various lumen outputs. Details specifications, dimensions, and certifications for these linear lighting solutions.
	Aurora EN-DLB Series LED Downlight Installation Guide and Specifications Comprehensive installation instructions and technical specifications for Aurora EN-DLB series LED downlights, including wiring diagrams, dimming compatibility (1-10V, DALI), IP44 rating, and Class II safety features.