Cruz Optiplus FIX Fitting Kit - Model 936-024

Included Components

• 1x Fitting Kit (018-041)
• 1x Bag (810-052)
• 4x Components (2539, 2540, 2618, 2619)
• 4x Components (2541, 2542, 2620, 2621)
• 2x Components (012-176)
• 2x Components (012-177)

Important Information

Important! Important! Wichtig!

This fixation Kit must be used with Cruz roof rack systems.

Spanish: ¡Este Kit de fijación tiene que usarse con sistemas portacargas Cruz!

French: Cet Kit de fixation devra être utilisé avec les systèmes porte-charge Cruz!

German: Dieser Stützfuß-Kit muß mit Cruz Dachträgersystemen benutzt werden!

Portuguese: Este Kit de fixação deve ser utilizado com os sistemas porta cargas Cruz!

Polish: Niniejszy element mocujący musi być używany z systemami bagażników dachowych firmy Cruz!

Czech: Tento fixační kit musí být používán s nosným systémem Cruz!

Hungarian: Bu aksesuar mutlaka Cruz taşıma sistemleriyle kullanılmalıdır!

Romanian: Aceste Kit de fixare, trebuie utilizat cu sisteme Cruz!

Croatian: Kit za montažu mora biti korišten uz Cruz sistem krovnog nosača!

Greek: Το αξεσουάρ αυτό θα πρέπει να χρησιμοποιείται αποκλειστικά στα συστήματα μπαρών της Cruz!

Turkish: Bu aksesuar mutlaka Cruz taşıma sistemleriyle kullanılmalıdır!

Russian: Крепежный комплект должен быть использован с багажной системой на крышу марки Cruz!

Dutch: Deze bevestigingsset moet worden gebruikt in combinatie met Cruz dakdrager systeem!

Italian: Questo kit di fissaggio deve essere usato con i portapacchi Cruz

Slovenian: Kit za pričvrstitev naj se uporablja le z izdelki iz asortimana strešnih košar Cruz!

Installation Steps

Step 1: Verify all components are present. [check-mark] [warning-sign] [document-icon] [roof-rack-icon] [1]

Step 2: Identify the correct mounting points on the vehicle roof. The diagram shows the placement of components (012-176, 012-177) on the front left (FL), front right (FR), rear left (RL), and rear right (RR) positions, along with specific part numbers for each location (e.g., 2539+2540 for FL).

Step 3: This step involves selecting the appropriate roof bar system. The document indicates compatibility with Cruz Airo Fuse and Cruz Airo FIX / Cruz Oplus S-FIX systems, referencing specific steps (4,5,6,7 for Airo Fuse and 8,9,10,11 for Airo FIX / Oplus S-FIX). A diagram shows two roof bars mounted on a vehicle roof.

Step 4: Detailed instructions for fitting the base of the roof bar system. This involves inserting a blue component into a slot, with a visual indicator showing the correct [check-mark] and incorrect [cross-mark] orientation. A warning [warning-sign] is shown for incorrect placement.

Step 5: Attaching a blue cover component to the roof bar base. A diagram shows the placement of the cover and its connection to the base. It also indicates compatibility with specific vehicle models and Cruz Airo Fuse bar types (e.g., C5 4p (08→), 3008 5p (09-16), Cruz Airo Fuse 98, 90, 114, 106).

Step 6: Securing the roof bar to the vehicle. This step includes a warning [warning-sign] against incorrect mounting and a confirmation [check-mark] for correct mounting. It shows the process of attaching the bar with bolts and washers, and tightening them to 5 Nm.

Step 7: Further assembly of the roof bar system. This involves attaching blue cover components to the base, similar to Step 5, and references step 3 and 4 for context. A diagram shows the correct [check-mark] and incorrect [cross-mark] positioning of a component.

Step 8: Similar to Step 4, this step illustrates the correct [check-mark] and incorrect [cross-mark] insertion of a blue component into a slot, with a warning [warning-sign] for improper fit.

Step 9: Attaching a blue cover component to the roof bar base, similar to Step 5. It also shows a diagram illustrating the correct [check-mark] and incorrect [cross-mark] mounting of the roof bar base to the vehicle, with a warning [warning-sign].

Step 10: Securing the roof bar with bolts and washers, and tightening to 5 Nm, similar to Step 6. The diagram shows the components being attached and the torque specification.

Step 11: Final assembly of the blue cover components onto the roof bar base, referencing step 3 for overall context. The diagram shows the correct [check-mark] and incorrect [cross-mark] placement of the components.