Cruz Optiplus Rail FIX Installation Guide

General Instructions

Important! Read first!

This fixation Kit must be used with Cruz roof rack systems.

Contents:

• 1x Wrench
• 1x Fixing Kit (018-041)
• 1x Bag (810-052)
• 1x Rail (001-820)
• 4x Part 2926
• 4x Part 2925
• 4x Part 2928
• 4x Part 2927
• 4x Part 2930
• 4x Part 2929
• 4x Part 2932
• 4x Part 2931
• 4x Part 012-070
• 4x Part 012-226

Important Safety Note: Ensure all parts are present before starting installation. Failure to use the correct parts or follow instructions may result in product failure or accidents.

Installation Steps

Step 1: Preparation

Check all components against the parts list. Ensure you have the correct tools. [Tool icon] [Checkmark icon] [Warning icon]

Step 2: Component Placement Diagram

Diagram showing the placement of components (012-226, 012-070, 2925, 2926, 2927, 2928, 2929, 2930, 2931, 2932) on the vehicle's roof rails. Labels indicate Front Left (FL), Front Right (FR), Rear Left (RL), and Rear Right (RR).

Step 3: Cruz Airo Fuse Installation

This section details the installation for Cruz Airo Fuse systems. It involves attaching specific parts (indicated by numbers like 4,5,6,7,8,14) to the roof bars.

Step 4: Cruz Airo FIX / Cruz Oplus S-FIX Installation

This section details the installation for Cruz Airo FIX and Cruz Oplus S-FIX systems. It involves attaching specific parts (indicated by numbers like 9,10,11,12,13,14) to the roof bars.

Step 5: Roof Bar Placement and Measurement

Diagram showing the placement of roof bars on the vehicle. Measurements indicate 600 mm and 700 mm spacing between bars.

Step 6: Detailed Assembly of Fixing Components

Diagrams illustrate the correct and incorrect methods for attaching the fixing components to the vehicle's roof. [Warning icon] [Cross icon] for incorrect, [Checkmark icon] for correct. Arrows indicate the direction of assembly.

Step 7: Securing the Roof Bars

Diagram shows the final securing of the roof bar to the vehicle, with a torque specification of 5 Nm indicated. [Torque wrench icon] [5 Nm label]

Step 8: Final Assembly and Cover Attachment

Diagrams show the attachment of covers and final securing of the roof bar system. [Warning icon] [Arrow icon]

Manufacturer Information

CRUZBER SA

ES-A14018311

P.I. Las Salinas II

14960 - Rute - Spain

Website: www.cruzber.com

CEE - EEC type approval: E9 26 R-03 3015