Componentes para la técnica de sistemas
Disyuntor
Model: 8530/1-MCB-STA103N-C6-000-4
Article Number: 293853
Product Description
The R. STAHL 8530 series circuit breakers offer excellent short-circuit current limitation and high breaking capacity (10, 15, or 25 kA). This reduces stress on electrical lines and provides high selectivity with upstream fuses. The modules feature a modular design, are available in 1 to 4-pole versions, and support nominal currents from 0.5–63 A. The maximum mounting capacity is 4.5 division units.
Key Features:
- Separator function according to EN 60947-2
- Energy limitation class 3
- Easy replacement or expansion of installations due to modular design
- Simple mounting via DIN rail snap-on in Ex e enclosures
- Fixed thermal and magnetic tripping
- Ergonomic operating lever for safe connection and disconnection
- Protection against reconnection during maintenance using padlocks (Accessories)
Technical Data
Explosion Protection
Applications (zones) | 1, 2 |
---|---|
Applications (zones) Note | Can be used in zones 21/22 with enclosure protection Ex tb/tc |
IECEX gas certification | IECEX FMG 19.0029U |
IECEx gas explosion protection | Ex db eb IIC Gb |
ATEX gas certification | FM19ATEX0191U |
ATEX gas explosion protection | II 2 G Ex db eb IIC Gb |
Certifications | ATEX (FM), Brazil (ULB), China (CQST), IECEX (FM) |
Certificate of conformity | Certificate of conformity (ATEX) |
Electrical Data
Rated operating voltage AC | 230/400 V |
---|---|
Rated operating current | 6 A |
Frequency | 50/60 Hz |
Rated switching capacity | 10 kA |
Electrical endurance | 2 x 10⁴ |
Mechanical endurance | 2 x 10⁴ |
1st auxiliary function | none |
Voltage 1st auxiliary function AC | - |
Maximum current 1st auxiliary function | - |
2nd auxiliary function | none |
Maximum voltage 2nd auxiliary function DC | C |
Tripping characteristic | C |
Number of poles | 3 pole + N |
Environmental Conditions
Ambient temperature | -40 °C ... 70 °C |
---|---|
Ambient temperature | -40 °F ... 158 °F |
Ambient temperature Note | Divergent ambient temperatures based on valid certificates upon request |
Mechanical Data
Degree of protection (IP) (IEC 60529) | IP2X |
---|---|
Enclosure material | Thermoplastic |
Connection terminal cross-section minimum | 1.5 mm² |
Connection terminal cross-section maximum | 25 mm² |
Connection terminal AWG minimum | 16 AWG |
Connection terminal AWG maximum | 4 AWG |
Connection terminal 2 cross-section minimum | 1.5 mm² |
Connection terminal 2 cross-section maximum | 10 mm² |
Connection terminal 2 AWG minimum | 16 AWG |
Connection terminal 2 AWG maximum | 8 AWG |
Tightening torque minimum | 2 N·m |
Tightening torque maximum | 3 N·m |
Connection terminal Note | 2 conductor connections (upper and lower chamber simultaneously): max. upper and lower chamber 16 / 10 mm² (only a difference in cross-section between the upper and lower chamber can be connected). Permitted conductor cross-section combinations are shown in the user instructions. |
Width | 110 mm |
Mounting width in inches | 4.33 in |
Length | 165 mm |
Length in inches | 6.5 in |
Installation depth | 138.3 mm |
Installation depth in inches | 5.44 in |
Weight | 1.8 kg |
Weight | 3.969 lb |
Mounting / Installation
Tightening torque | 2-3 N·m |
---|---|
Tightening torque lbf in | 17.7 ... 26.6 lbf-in |
Tightening torque auxiliary contact | 0.4–0.6 N·m |
Tightening torque auxiliary contact lbf in | 3.5 ... 5.3 lbf in |
Technical Diagrams
Technical diagrams - Subject to change.
Tripping time curves - Subject to change.
Measurement diagram (all dimensions in [inches]) - Subject to change.
Accessories
Cylinder lock
Description | Cylinder lock for blocking (stirrup Ø 3) | Article Number: 107115 |
---|
Quadruple immobilization device
Description | Locking/tagging pliers for individual component locking using up to 4 cylinder locks. | Article Number: 227232 |
---|
Fixing kit
Description | A set of fixings for mounting the component on the mounting plate without a top-hat rail. | Article Number: 276618 |
---|
R. STAHL reserves the right to modify technical data, dimensions, weights, constructions, and delivery options.