JLab Studio Wireless Headphones
Thank you for purchasing a JLab Audio product. We take pride in our products and are always here to support them.
Product Warranty
All warranty claims are determined by JLab Audio's authorization and sole discretion. Please retain your proof of purchase to receive warranty service.
Contact Us: Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact.
Register Now for product updates, tips, and FAQs.
Initial Setup: Bluetooth Pairing
Once paired, the headphones will emit two beeps and the blue light will flash slowly.
Illustration of a smartphone settings menu showing Bluetooth enabled, and the headphones' power button highlighted with an indicator for pressing.
Pairing New Devices & Additional Devices
Turn off Bluetooth on a previously paired device and turn on Bluetooth on the new device. Repeat the initial setup for the new device.
Note: Bluetooth is a wireless communication technology sensitive to objects between the headphones and the connected device. These headphones are designed for use within 10 meters (33 feet) of the connected device, without major objects (like walls) in between.
Once successfully connected, the headphones will remember the device and automatically pair when powered on in the future. Only one Bluetooth device can be connected at a time. To pair a different device, first unpair from the current device in your Bluetooth settings.
If the Bluetooth connection is lost for any reason, manually reconnect the Bluetooth device.
Button Functions
- Volume Up: Single press.
- Next Track: Press and hold for 2 seconds.
- Volume Down: Single press.
- Previous Track: Press and hold for 2 seconds.
- Power On/Off: Press and hold for 2 seconds [?].
- Play/Pause / Answer Call / End Call: Single press ▶️/⏸️.
- Reject Call: Press and hold for 1 second.
- Activate Siri (iOS) or "OK Google" (Android): Double press.
- EQ Change: Simultaneously press both buttons (cycles through the 3 EQ settings).
Diagram of the headphones showing buttons for volume up/down, power, and play/pause. Arrows indicate press and hold actions for track skipping and call handling.
EQ Settings
Cycle through 3 EQ modes by pressing both buttons simultaneously:
- JLab Signature: Amplified vocals and bass with JLab C3™ signature sound.
- Balanced (Two beeps): Even sound with no additional sound enhancements.
- Bass Boost (Three beeps): Amplified bass and sub-bass frequencies.
Icons representing JLab Signature, Balanced, and Bass Boost sound profiles.
Charging
Note: For optimal performance, charge overnight using the micro USB cable before use. A full charge takes approximately 3 hours.
Connect the micro USB (included) to your headphones and the USB to a computer or power adapter (not included). Ensure the USB connection is powered.
A red light indicates the headphones are charging. A blue light indicates charging is complete.
Note: Studio Bluetooth can be used while charging. Power on and connect to your device after charging has begun.
Charging: [Battery symbol, red light]
Charging Complete: [Battery symbol, blue light]
Illustration showing a micro-USB cable connected to the headphones and a USB port. Indicator lights are shown as red (charging) and blue (fully charged).
Precautions
- Do not allow moisture or liquid to enter the headphone cups.
- Avoid extreme heat, cold, and humidity.
- Do not drop or apply excessive force to the headphones. Do not yank cables, apply too much force, or fold or bend them severely.
- Earwax may accumulate in the headphone cups, leading to reduced sound quality. Carefully remove earwax using a cotton swab or other small tool to improve sound quality.
- If you experience discomfort or pain during use, reduce the volume or temporarily discontinue use.
- If you continue to experience discomfort while using the product, discontinue use and consult a medical professional.
- We recommend treating your headphones with care, similar to sunglasses. Store them in a safe place when not in use.
