JLab Studio Pro Wireless Headphones
Your guide to setup, features, and care.
Welcome to JLab Audio
We are thrilled that you are using JLab Audio! We are proud of our products and stand behind them 100%.
Your Warranty
All warranty claims are subject to JLab Audio's approval and our discretion. Save your receipt for the warranty to be valid.
Contact Us: Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact
Register Today: intl.jlabaudio.com/register
- Product updates
- Usage tips
- FAQs and more
First-Time Setup: Bluetooth Pairing
-
Turn on Bluetooth in your device settings.
Visual: Phone screen showing Bluetooth settings with the Bluetooth toggle turned on.
-
With the Studio Pro wireless headphones turned off, press and hold the power button for approximately 8 seconds.
Visual: Headphones with a rapidly flashing red and blue light, indicating they are searching for a Bluetooth device.
-
Select "JLab Studio Pro" in your device settings to connect.
Visual: Phone screen showing "JLab Studio Pro" selected in Bluetooth settings. Headphones shown paired with a slow blue flashing light.
When the headphones are paired, you will hear two beeps and the blue light will flash slowly.
Pairing New / Additional Devices
Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on the new device. Repeat the FIRST-TIME SETUP process for new devices.
Notes on Bluetooth
- Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
- The headphone is designed to be used within 33 feet (10 meters) of a paired device, without large objects between them (walls, etc.).
- Once connected, the headphone will remember your device and automatically pair when turned on in the future. Only one device can be connected at a time. To pair another device, first unpair the current device via its Bluetooth settings.
- If the Bluetooth connection is lost for any reason, manually reconnect your Bluetooth device.
Button Functions
- Volume Up: Single click
- Track Forward: Press and hold for more than 2 seconds
- Volume Down: Single click
- Track Backward: Press and hold for more than 2 seconds
- Power On / Off: Press and hold for more than 2 seconds
- Play / Pause / Answer / End Call: Single click
- Reject Incoming Call: Press and hold for 1 second
- Activate Siri (iOS) OR "Ok Google" (Android): Double click
- Bluetooth Pairing: See FIRST-TIME SETUP
Change EQ Settings
Press both buttons simultaneously (Studio Pro cycles through 3 EQ settings):
- JLab SIGNATURE (One beep): JLab C3™™ signature sound with enhanced vocals and bass
- BALANCED (Two beeps): Even sound without extra sound enhancements
- BASS BOOST (Three beeps): Enhanced bass and sub-bass
Charging
Connect the USB Type-C charging cable (included) to the headphone and connect to a computer or a 5V/1A USB output device (not included). Ensure the USB connection has a power source.
A solid red light indicates the headphone is charging. ?
A solid blue light indicates charging is complete. ?
Visual: USB-C cable connected to headphones. Indicator light is solid red (charging) or solid blue (charged).
Warning
- Avoid getting moisture or liquid on the earcups.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the headphones and do not subject the cable to stress by pulling it quickly or hard, or by bending it sharply.
- Earwax can build up on the earcups and degrade sound quality. Gently remove earwax with a cotton swab or other small tool to improve sound quality.
- If you experience discomfort or pain, try lowering the volume or refraining from using the earbuds for a while.
- If you frequently experience discomfort while using the product, discontinue use and consult a doctor.
- We recommend treating your headphones like a pair of fine sunglasses and storing them in a safe place when not in use.
