Ecler ARQISi Series Architectural Loudspeakers
User Manual
Important Information
Important Notice: Please read and follow all instructions in this manual carefully before connecting the device to ensure optimal performance and longevity.
Maintenance: For optimal functioning, it is recommended to have maintenance performed exclusively by authorized Ecler technical service partners.
Warranty: All Ecler products come with a warranty. Please refer to www.ecler.com or the warranty card included with the device for warranty duration and conditions.
Safety Precautions:
- Read this manual carefully and keep it for future reference.
- Pay attention to all warning labels.
- Follow all instructions.
- Never use the device near water.
- Clean the device only with a dry cloth.
- Ensure all ventilation openings remain unobstructed.
- Do not install near heat sources like radiators or amplifiers.
- Do not bypass the polarization or grounding of the power plug.
- Ensure the power cord is not pinched, twisted, or stepped on.
- Use only manufacturer-recommended accessories.
- Disconnect the device during thunderstorms or prolonged periods of non-use.
- Servicing should only be performed by qualified personnel.
- Ensure the power cord is easily accessible for disconnection.
- Connect the device to a grounded power outlet.
- Protect the device from drips and splashes; do not place liquid-filled containers on it.
- Disposal: This product must not be disposed of as unsorted municipal waste. Dispose of it at the nearest collection point for electrical and electronic waste.
NEEC AUDIO BARCELONA, S.L. is not responsible for any damage to persons, animals, or objects due to non-compliance with these warnings.
Introduction
The ARQISi loudspeaker line is designed for permanent installation in environments requiring easy setup and reliable, high-performance sound with excellent quality. Developed through continuous exchange with installers and interior design professionals, the ARQISi series offers refined sound and improved frequency response. Models like ARQIS110i and ARQIS112i feature enhanced performance, and the ARQISSB12i is a new subwoofer model. The ARQIS105i, ARQIS106i, and ARQIS108i are equipped with the VEASY wall mount, which is VESA-compatible and allows for easy vertical and horizontal adjustment, secured with a single screw. All models feature a square logo that can be rotated 90° without tools.
The ARQISI series models are ideal for various applications including shopping centers, sports venues, theaters, conference rooms, AV presentations, corporate spaces, and for extending sound coverage in clubs, cafes, restaurants, and amusement parks.
Key Features
ARQIS105i
- 2-Way Full-Range Architectural Loudspeaker
- 70W RMS @ 8Ω
- 5.25-inch Woofer
- 1-inch Tweeter
- Dual INPUT/STACK connection (Euroblock) with safety accessory to prevent accidental disconnection.
- VEASY wall mount included (VESA compatible), easy to install with markings for precise reorientation. Vertically and horizontally adjustable, fixed with one screw.
- 4 M6 mounting points.
- Available in White (RAL9003) and Black (RAL9005).
ARQIS106i
- 2-Way Full-Range Architectural Loudspeaker
- 120W RMS @ 8Ω
- 6-inch Woofer
- 1-inch Compression driver (rotatable)
- Dual INPUT/STACK connection (Euroblock) with safety accessory.
- VEASY wall mount included (VESA compatible), easy to install with markings. Vertically and horizontally adjustable, fixed with one screw.
- 8 M6 mounting points.
- Includes a safety metal strap to prevent the unit from falling if it detaches from the wall.
- Available in White (RAL9003) and Black (RAL9005).
ARQIS108i
- 2-Way Full-Range Architectural Loudspeaker
- 150W RMS @ 8Ω
- 8-inch Woofer
- 1-inch Compression driver (rotatable)
- Dual INPUT/STACK connection (Euroblock + Speakon®) with safety accessory.
- VEASY wall mount included (VESA compatible), easy to install with markings. Vertically and horizontally adjustable, fixed with one screw.
- Compatible with U-shaped wall mount ARQ108UB (not included).
- 6 M6 mounting points and 2 M8 mounting points.
- Includes a safety metal strap to prevent the unit from falling.
- Available in White (RAL9003) or Black (RAL9005).
ARQIS205i
- 2-Way Full-Range Architectural Loudspeaker
- 140W RMS @ 8Ω
- 2 x 5-inch Woofer
- 1-inch Compression driver (rotatable)
- Dual INPUT/STACK connection (Euroblock + Speakon®) with safety accessory.
- U-shaped wall mount included. Vertically adjustable.
- 4 M6 mounting points and 12 M8 mounting points.
- Includes a safety metal strap to prevent the unit from falling.
- Available in White (RAL9003) or Black (RAL9005).
ARQIS208i
- 2-Way Full-Range Architectural Loudspeaker
- 300W RMS @ 8Ω
- 2 x 8-inch Woofer
- 1-inch Compression driver (rotatable)
- Dual INPUT/STACK connection (Euroblock + Speakon®) with safety accessory.
- U-shaped wall mount included. Vertically adjustable.
- 4 M6 mounting points and 12 M8 mounting points.
- Includes a safety metal strap to prevent the unit from falling.
- Available in White (RAL9003) or Black (RAL9005).
ARQIS110i
- 2-Way Full-Range Architectural Loudspeaker
- 300W RMS @ 8Ω
- 1x10-inch Woofer
- 1.7-inch Compression driver (rotatable)
- Dual INPUT/STACK connection (Euroblock + Speakon®) with safety accessory.
- 35mm stand mount, compatible with SR12 wall mount (not included) and TRIPO1 tripod (not included).
- Compatible with U-shaped wall mount ARQ110UB (not included).
- 12 M8 mounting points.
- Available in White (RAL9003) or Black (RAL9005).
ARQIS112i
- 2-Way Full-Range Architectural Loudspeaker
- 500W RMS @ 8Ω
- 1x12-inch Woofer
- 1.7-inch Compression driver (rotatable)
- Dual INPUT/STACK connection (Euroblock + Speakon®) with safety accessory.
- 35mm stand mount, compatible with SR12 wall mount (not included) and TRIPO1 tripod (not included).
- Compatible with U-shaped wall mount ARQ112UB (not included).
- 12 M8 mounting points.
- Available in White (RAL9003) or Black (RAL9005).
ARQISSB6Ti
- 6.5-inch Subwoofer + 6.5-inch Passive Radiator
- For 70/100V line installation: 60/120W and 8 Ohm selector switch.
- Euroblock connection and spring-loaded terminals (Clip).
- LPF frequency setting: OFF / 120Hz / 150Hz.
- Wall mount bracket included.
- Available in White (RAL9003) or Black (RAL9005).
ARQISSB10i
- 1-Way Subwoofer for wall mounting.
- 150W RMS @ 8 Ohm.
- 10-inch Woofer.
- Euroblock connection and spring-loaded terminals (Clips).
- LPF frequency setting: OFF / 120Hz / 150Hz.
- Wall mount bracket included.
- 12 M8 mounting points.
- Available in White (RAL9003) or Black (RAL9005).
ARQISSB12i
- 1-Way Subwoofer for wall mounting.
- 300W RMS @ 8 Ohm.
- 12-inch Woofer.
- Dual INPUT/STACK connection, Speakon®.
- 12 M8 mounting points.
- Available in Black (RAL9005).
ARQISSB15i
- 1-Way Architectural Subwoofer.
- 600W RMS @ 8Ω.
- 15-inch Woofer.
- Dual INPUT/STACK connection, Speakon®.
- 35mm stand mount for pole mounting in conjunction with ARQIS110i, ARQIS112i, etc.
- 12 M8 mounting points.
- Available in Black (RAL9005).
Connection
The connection cable linking the amplifier outputs to the loudspeakers must be of high quality, with adequate cross-section, and as short as possible. This is particularly important for long distances and low impedance loads (4-8Ω). For distances up to 10m, a cable with a minimum cross-section of 2.5mm² is recommended. For longer cable runs, a cross-section of 4 to 6mm² is recommended.
A simple method to determine the necessary cross-section is to use the following formula, accepting approximately 4% loss:
Cross-section in mm² = (Length in m × Amplifier Output Voltage) / (√Impedance of the loudspeaker in Ω × 100)
Always observe polarity. All models are equipped with a Euroblock connector, and depending on the model, a second Euroblock or Speakon® connector is available, allowing for parallel connection of additional loudspeakers.
6.1 ARQISSB6Ti
The ARQISSB6Ti is designed for both low-impedance and high-impedance operation. It features a 3-position switch on the rear panel to select the desired operating mode.
The 8Ω/120W position corresponds to low-impedance operation with a maximum power of 120W. The two positions for the 70/100V line selector are for setting the maximum power the unit will operate with (60/120W @ 100V | 30/60W @ 70W).
Connection Diagram for ARQIS SB6Ti:
INPUT/STACK terminals are for connecting the audio signal.
POWER switch controls the unit's power.
L.P. FILTER switch allows selection of the Low-Pass Filter frequency (OFF, 120Hz, 150Hz).
70V/100V Selector: Adjusts the power output for 70V or 100V line operation.
8Ω/120W Selector: Selects the 8-ohm impedance operation.
EQ Settings
Download the Ecler ARQISi EQ settings file for ARQIS105i, ARQIS106i, ARQIS108i, ARQIS110i, ARQIS112i, ARQIS205i, and ARQIS208i. These files can be imported into the EclerNet Manager software.
Recommended Amplifiers
The following table lists the recommended amplifier power for each loudspeaker system:
- ARQIS105i: 140W RMS
- ARQIS106i: 240W RMS
- ARQIS108i: 300W RMS
- ARQIS205i: 280W RMS
- ARQIS208i: 600W RMS
- ARQIS110i: 600W RMS
- ARQIS112i: 1000W RMS
- ARQISSB6Ti: 240W RMS @ 8Ω
- ARQISSB10i: 300W RMS
- ARQISSB12i: 600W RMS
- ARQISSB15i: 1200W RMS
Placement
Follow these general rules for placement:
- Mount the loudspeakers on solid and stable surfaces.
- For subwoofers, horizontal placement on the floor yields better results than hanging or vertical positioning.
- Ensure no obstacles are between the loudspeakers and the audience. High frequencies are highly directional, and any obstruction can dampen the frequency response. For larger audiences, higher placement improves sound dispersion.
You can download all EASE files by clicking on the image.
Installation
The installation methods for the ARQISi series have been carefully studied for each model. The ARQIS106i, ARQIS108i, ARQIS205i, ARQIS208i, ARQIS110i, and ARQIS112i can be installed horizontally or vertically thanks to the included accessories and the rotatable 1-inch compression driver.
Note: The compression driver is factory-set in the same orientation as the loudspeaker grille logo (horizontal or vertical).
Each ARQISi model comes with an optimal mounting system. The ARQIS205i / ARQIS208i / ARQIS110i / ARQIS112i / ARQISSB10i / ARQISSB12i / ARQISSB15i models also feature integrated M8 nuts for standard screws, facilitating suspension from compatible structures or trusses using steel cables.
IMPORTANT NOTICE: Never hang the units by their carrying handles (if present). Always use the appropriate mounting accessories. When using ceiling or wall mounts, always install a backup suspension for safety. Use steel cables, slings, or chains of suitable diameter to prevent the loudspeaker from falling if any part of the suspension becomes detached.
Technical Data
MDF MDF MDF screw fixation screw fixation screw fixation| Feature | ARQIS105i | ARQIS106i | ARQIS108i |
|---|---|---|---|
| Effective Freq. Range¹ | 80 Hz - 20 kHz | 75 Hz - 20 kHz | 65 Hz - 20 kHz |
| Coverage angle² | 150°x130° (HxV) | 140°x160° (HxV) | 130°x130° (HxV) |
| Power handling | 70W RMS / 280W Peak | 120W RMS / 480W Peak | 150W RMS / 600W Peak |
| Sensitivity³ | 89dB (1W/1m) | 88dB (1W/1m) | 90dB (1W/1m) |
| Maximum SPL⁴ | 107dB continuous / 113dB peak | 109dB continuous / 115dB peak | 112dB continuous / 118dB peak |
| Recommended amplifier | 140W RMS | 240W RMS | 300W RMS |
| Ways | 2-Way | 2-Way | 2-Way |
| Low frequency driver | 5.25" woofer | 6" woofer | 8" woofer |
| High frequency driver | 1" tweeter | 1" Compression driver (rotatable) | 1" Compression driver (rotatable) |
| Nominal impedance | 8Ω | 8Ω | 8Ω |
| Crossover filter | 3.2kHz | 3.2kHz | 3.5kHz |
| Recommended High-Pass protection filter | 80 Hz with minimum 12 dB/octave filter | 70 Hz with minimum 12 dB/octave filter | 70 Hz with minimum 12 dB/octave filter |
| Connection type | 2 x Euroblock | 2 x Euroblock | 1 x Euroblock & 1x Speakon (+1, -1) |
| Installation options | surface, WALL, desktop | surface, WALL, desktop | surface, WALL, desktop |
| Environmental | IP31 | IP31 | IP31 |
| Enclosure material | |||
| Grille material | Steel | Steel | Steel |
| Grille fixing system | |||
| Flying points | 4 x M6 | 8 x M6 | 6 x M6 & 2 x M8 |
| Operating temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Operating humidity | <85% HR | <85% HR | <85% HR |
| Storage temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Storage humidity | <90% HR | <90% HR | <90% HR |
| Included accessories | Wall Bracket/3mm, 4mm, 6mm Allen keys | Wall Bracket/3mm, 4mm, 6mm Allen keys | Wall Bracket/3mm, 4mm, 6mm Allen keys |
| Finished colour | White (RAL 9003) or black (RAL 9005) | White (RAL 9003) or black (RAL 9005) | White (RAL 9003) or black (RAL 9005) |
| Dimensions (WxHxD) | 186 x 280 x 210 mm / 7.32 x 11.02 x 8.27 in | 215 x 350 x 240 mm / 8.46 x 13.78 x 9.45 in | 244 x 390 x 280 mm / 9.61 x 15.35 x 11.02 in |
| Weight | 3.6 kgs / 7.93 lb | 7.4 Kg / 16.31 lb | 8.4 Kg/18.51 lb |
| Pieces per box | 1 piece | 1 piece | 1 piece |
| Shipping dimensions (WxHxD) | 365 x 260 x 335 mm / 14.37 x 10.24 x 13.19 in | 395 x 290 x 405 mm / 15.55 x 11.42 x 15.94 in | 435 x 445 x 320 mm / 17.13 x 17.52 x 12.60 in |
| Shipping weight | 5.5 kg / 12.12 lb | 8.7 Kg / 19.18 lb | 10.5 Kg/23.14 lb |
| Feature | ARQIS205i | ARQIS208i |
|---|---|---|
| Effective Freq. Range¹ | 78Hz-20kHz | 73Hz-20kHz |
| Coverage angle² | 150° x 40° (HxV) | 130° x 30° (HxV) |
| Power handling | 140W RMS / 560W peak | 300W RMS / 1200W peak |
| Sensitivity³ | 90dB (1W/1m) | 94dB (1W/1m) |
| Maximum SPL⁴ | 111dB continuous / 117dB peak | 119dB RMS / 125dB peak |
| Recommended amplifier | 280W | 600W RMS |
| Ways | 2-way, full range | 2-way, full range |
| Low frequency driver | 2x 5" woofer | 2x 8" woofer |
| High frequency driver | 1" Compression driver (rotatable) | 1" Compression driver (rotatable) |
| Nominal impedance | 8Ω | 8Ω |
| Crossover filter | 2.3kHz | 2,6 kHz |
| Recommended High-Pass protection filter | 80 Hz with minimum 12 dB / octave filter | 70 Hz with minimum 12 dB / octave filter |
| Connection type | 1 x Euroblock & 1x Speakon (+1, -1) | 1 x Euroblock & 1x Speakon (+1, -1) |
| Installation options | Surface, wall, desktop | Surface, wall, desktop |
| Environmental | IP31 | IP31 |
| Enclosure material | ||
| Grille material | Steel | Steel |
| Grille fixing system | ||
| Flying points | 4x M6 & 12 x M8 | 4x M6 & 12 x M8 |
| Operating temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Operating humidity | <85% HR | <85% HR |
| Storage temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Storage humidity | <90% HR | <90% HR |
| Included accessories | U Bracket / 5mm Allen key / 6mm Allen key | U Bracket / 5mm Allen key / 6mm Allen key |
| Finished colour | Black (RAL9005) or White (RAL 9003) | Black (RAL9005) or White (RAL 9003) |
| Dimensions (WxHxD) | 480 x 186 x 210 mm / 18.90 x 7.32 x 8.27 in | 610 x 244 x 280 mm / 24.01 x 9.61 x 11.02 in |
| Weight | 8.4 kg / 18.52 lb | 14.8 kg/32.62 lb |
| Pieces per box | 1 piece | 1 piece |
| Shipping dimensions (WxHxD) | 540 x 265 x 300 mm / 21.26 x 10.43 x 11.81 in | 670 x 325 x 370 mm / 26.38 x 12.80 x 14.57 in |
| Shipping weight | 9.5 kg / 20.94 lb | 16.4 kg/36.15 lb |
| Feature | ARQIS110i | ARQIS112i |
|---|---|---|
| Effective Freq. Range¹ | 70 Hz - 19 kHz (-10dB) | 70 Hz - 19 kHz (-10dB) |
| Coverage angle² | 110°×110° (HxV) | 120°×110° (HxV) |
| Power handling | 300W RMS / 1200W Peak | 500W RMS / 2000W Peak |
| Sensitivity³ | 94dB (1W/1m) | 96dB (1W/1m) |
| Maximum SPL⁴ | 119dB continuous / 125dB peak | 123dB continuous / 129dB peak |
| Recommended amplifier | 600W | 1000W |
| Ways | 2-way, full range | 2-way |
| Low frequency driver | 10" woofer | 12" woofer |
| High frequency driver | 1.7" Compression driver (rotatable) | 1.7" Compression driver (rotatable) |
| Nominal impedance | 8Ω | 8Ω |
| Crossover filter | 2.1 kHz | 2.2 kHz |
| Recommended High-Pass protection filter | 60Hz with minimum 12 dB / octave filter | 58Hz with minimum 12 dB / octave filter |
| Connection type | 1 x Euroblock & 1x Speakon© (+1, -1) | 1 x Euroblock & 1x Speakon© (+1, -1) |
| Installation options | ||
| Environmental | IP31 | IP31 |
| Enclosure material | ||
| Grille material | Steel | Steel |
| Grille fixing system | ||
| Flying points | 12 x M8 | 12 x M8 |
| Operating temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Operating humidity | <85% HR | <85% HR |
| Storage temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Storage humidity | <90% HR | <90% HR |
| Included accessories | 4x Rubber feet, 4x screws | 4x Rubber feet, 4x screws |
| Finished colour | Black (RAL9005) or White (RAL 9003) | Black (RAL9005) or White (RAL 9003) |
| Dimensions (WxHxD) | 342.5 x 495 x 345 mm/ 13.48 x 19.49 x 13.58 in |
403 x 565 x 380 mm / 15.87 x 22.24 x 14.96 in |
| Weight | 14,8 kg/32.63 lb | 20,0 kg / 44.09 lb |
| Pieces per box | 1 piece | 1 piece |
| Shipping dimensions (WxHxD) | 580 x 460 x 460 mm / 22.83 x 18.11 x 18,11 in |
650 x 470 x 470 mm / 25.59 x 18.50 x 18.50 in |
| Shipping weight | 21 kg / 46.29 lb | 26.2 kg/57.76 lb |
| Feature | ARQISSB12i | ARQISSB15i |
|---|---|---|
| Effective Freq. Range¹ | 44Hz-4kHz | 31Hz-3kHz |
| Power handling | 300W RMS / 1200W peak | 600W RMS / 2400W peak |
| Sensitivity³ | 95dB (1W/1m) | 97dB (1W/1m) |
| Maximum SPL⁴ | 120dB RMS/126dB peak | 125dB RMS/131dB peak |
| Recommended amplifier | 600W | 1200W |
| Ways | 1 way | 1 way |
| Driver | 12" woofer | 15" woofer |
| Nominal impedance | 8Ω | 8Ω |
| Crossover filter | No | No |
| Recommended High-Pass protection filter | 45 Hz with minimum 12 dB / octave filter | 40 Hz with minimum 12 dB / octave filter |
| Connection type | 2x Speakon (+1, -1) | 2x Speakon (+1, -1) |
| Installation options | Surface, wall, desktop | Surface, wall, desktop |
| Environmental | IP31 | IP31 |
| Enclosure material | ||
| Grille material | Steel | Steel |
| Grille fixing system | ||
| Flying points | 12 x M8 | 12 x M8 |
| Operating temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Operating humidity | <85% HR | <85% HR |
| Storage temperature | Min: -20°C; -4°F Max: 70°C; 158°F |
Min: -20°C; -4°F Max: 70°C; 158°F |
| Storage humidity | <90% HR | <90% HR |
| Included accessories | 4x Rubber feet / 4x Screws | 4x Rubber feet / 4x Screws |
| Finished colour | Black (RAL9005) | Black (RAL9005) |
| Dimensions (WxHxD) | 440 x 375 x 440 mm / 17.32 x 14.76 x 17.32 in | 534 x 460 x 525 mm / 21.02 x 18.11 x 20.67 in |
| Weight | 19.4 Kg / 42.76 lbs | 32 kg / 70,54 lb |
| Pieces per box | 1 unit | 1 unit |
| Shipping dimensions (WxHxD) | 535 x 470 x 535 mm / 21.06 x 18.50 x 21.06 in | 624 x 555 x 610 mm / 24.57 x 21.85 x 24.02 in |
| Shipping weight | 21.7 kg / 47.84 lb | 36.2 kg/79.8 lb |
Mounting Diagrams
VEASY Wall Mount Installation (ARQIS105i, ARQIS106i, ARQIS108i):
Diagrams illustrate the steps for mounting the VEASY bracket:
- Attach the bracket to the wall using appropriate screws (not included).
- Attach the speaker to the bracket.
- Adjust tilt orientation.
- Adjust pan orientation.
Horizontal or Vertical Installation using Mounting Points:
Diagrams show examples of horizontal and vertical installation using the speaker's mounting points.
Package Contents
13.1. ARQIS105i
- 1 x ARQIS105i Loudspeaker
- 1 x VEASY wall mount (vertical and horizontal adjustment, VESA compatible)
- 1 x 3mm Allen key
- 1 x 4mm Allen key
- 1 x 6mm Allen key
- 2 x Euroblock connectors
- Quick Start Guide
- Warranty Card
13.2. ARQIS106i
- 1 x ARQIS106i Loudspeaker
- 1 x VEASY wall mount (vertical and horizontal adjustment, VESA compatible)
- 1 x 3mm Allen key
- 1 x 4mm Allen key
- 1 x 6mm Allen key
- 2 x Euroblock connectors
- Quick Start Guide
- Warranty Card
13.3. ARQIS108i
- 1 x ARQIS108i Loudspeaker
- 1 x VEASY wall mount (vertical and horizontal adjustment, VESA compatible)
- 1 x 3mm Allen key
- 1 x 4mm Allen key
- 1 x 6mm Allen key
- 2 x Euroblock connectors
- Quick Start Guide
- Warranty Card
13.4. ARQIS205i
- 1 x ARQIS205i Loudspeaker
- 1 x U-shaped wall/ceiling mount
- 1 x Metal safety strap
- 1 x 5mm Allen key
- 1 x 6mm Allen key
- 2 x Screws
- 2 x Washers
- 2 x Rubber grommets
- 2 x Plastic covers
- 1 x Euroblock connector
- 1 x Speakon connector
- Quick Start Guide
- Warranty Card
13.5 ARQIS208i
- 1 x ARQIS208i Loudspeaker
- 1 x U-shaped wall/ceiling mount
- 1 x Safety steel strap
- 1 x 5mm Allen key
- 1 x 6mm Allen key
- 2 x Screws
- 2 x Washers
- 2 x Rubber grommets
- 2 x Plastic covers
- 1 x Euroblock connector
- 1 x Speakon connector
- Quick Start Guide
- Warranty Card
13.6. ARQIS110i
- 1 x ARQIS110i Loudspeaker
- 4 x Screws
- 4 x Rubber feet
- 1 x Euroblock connector
- Quick Start Guide
- Warranty Card
13.7. ARQIS112i
- 1 x ARQIS112i Loudspeaker
- 4 x Screws
- 4 x Rubber feet
- 1 x Euroblock connector
- Quick Start Guide
- Warranty Card
13.8. ARQISSB6Ti
- 1 x ARQISSB6Ti Loudspeaker
- 1 x U-shaped wall/ceiling mount
- 1 x Safety steel strap
- 1 x 5mm Allen key
- 1 x 6mm Allen key
- 2 x Screws
- 2 x Washers
- 2 x Rubber grommets
- 2 x Plastic covers
- 1 x Euroblock connector
- 1 x Speakon connector
- Quick Start Guide
- Warranty Card
13.9. ARQISSB10i
- 1 x ARQISSB10i Loudspeaker
- 1 x Wall mount bracket
- 4 x Screws
- 4 x Rubber feet
- 1 x Euroblock connector
- Quick Start Guide
- Warranty Card
13.10. ARQISSB12i
- 1 x ARQISSB12i Loudspeaker
- 1 x Speakon connector
- 4 x Rubber feet
- Quick Start Guide
- Warranty Card
13.11 ARQISSB15i
- 1 x ARQISSB15i Loudspeaker
- 1 x Speakon connector
- 4 x Rubber feet
- Quick Start Guide
- Warranty Card
Final Notes
All specifications are subject to change without notice due to production tolerances. NEEC AUDIO BARCELONA, S.L. reserves the right to make design or manufacturing improvements that may affect these product specifications.
For technical questions, please contact your supplier, dealer, or fill out the contact form on our website under Support / Technical requests.
Motors, 166-168, 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com
