Product Overview
This document provides the installation guide for the MAXpeedingRODS Rear Suspension Leveling Kit designed for Ford F-250 2WD and 4WD vehicles. The kit is identified by the model number ABK-TF2501723-VLC.
Pre-Installation Notice
- This product will not increase the load capacity of your vehicle.
- Do not exceed the manufacturer's recommended weight limit.
- It is necessary to ensure that there is at least 1/2 inch of gap between the kit and the frame when the car is empty.
- All modifications must be installed by qualified personnel and in compliance with your local modification regulations.
Installation Guide
The installation involves fitting a rubber assembly to the vehicle's suspension system. The process requires careful placement between the axle and the frame.
Diagram Description: The diagram shows a block representing the vehicle's frame, a stacked rubber component (the leveling kit), and a view of how it is mounted to the vehicle's axle and frame structure.
Removing the Bump Stop
Step 1
Raise the vehicle with a jack and ensure the suspension kit assembly can be positioned between the axle and frame.
Step 2
Remove the factory bump stop and retain the nuts.
Diagram Description: Illustrates a vehicle's frame and axle, with the factory bump stop attached, showing the process of its removal.
Installing the Rubber Assembly
Step 1
Install the rubber assembly to the frame using the original bump stop nuts. Subsequently, insert the U-shaped gasket between the upper mounting bracket and the beam.
Diagram Description: Shows the rubber assembly being attached to the vehicle frame. An inset diagram details the placement of the U-shaped gasket between the mounting bracket and the beam.
Installation Steps Continued
Step 2
Fasten all nuts securely. Repeat the entire process for the other side of the vehicle.
Diagram Description: Depicts the suspension leveling kit fully installed on the vehicle's axle and frame.
Installation Completed
The installation of the rear suspension leveling kit is now complete.
⚠️ WARNING: Cancer and Reproductive Harm. For more information, visit www.P65Warnings.ca.gov.
