Behringer DR115DSP/DR112DSP/DR110DSP Quick Start Guide

This guide provides essential information for setting up and operating your Behringer DR115DSP, DR112DSP, and DR110DSP active PA speaker systems.

Important Safety Instructions

Please read and follow all safety instructions to prevent electric shock, fire hazards, and ensure proper operation.

WARNING: Terminals marked with a symbol carry electrical current sufficient to constitute a risk of electric shock. Use only high-quality professional speaker cables with appropriate connectors. Installation or modification should only be performed by qualified personnel.
WARNING: The symbol indicates the presence of uninsulated dangerous voltage inside the enclosure, which may be sufficient to constitute a risk of shock.
CAUTION: To reduce the risk of electric shock, do not remove the cover or rear section. No user-serviceable parts inside. Refer servicing to qualified personnel.
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. Avoid splashing liquids and placing liquid-filled objects on the apparatus.
CAUTION: Service instructions are for qualified personnel only. Do not perform any servicing other than that contained in the operation instructions.
Follow all instructions, heed warnings, and keep these instructions.
Do not use near water. Clean only with a dry cloth.
Do not block ventilation openings. Install according to manufacturer's instructions.
Do not install near heat sources.
Do not defeat the safety purpose of polarized or grounding-type plugs. Consult an electrician if the plug does not fit your outlet.
Protect the power cord from damage.
Use only manufacturer-specified attachments/accessories.
Use only with specified carts, stands, or tables. Use caution when moving equipment combinations.
Unplug during lightning storms or when unused for long periods.
Refer all servicing to qualified personnel. Servicing is required if the apparatus is damaged, exposed to liquid/objects, rain/moisture, does not operate normally, or has been dropped.
Connect to a MAINS socket outlet with a protective earthing connection.
Ensure the MAINS plug or appliance coupler (if used as a disconnect device) remains readily operable.
Dispose of this product correctly according to WEEE Directive (2012/19/EU) and national laws. Take it to a licensed collection center for recycling.
Do not install in confined spaces.
Do not place naked flame sources on the apparatus.
Keep environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
Apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER: Music Tribe accepts no liability for any loss suffered by anyone relying wholly or in part on the descriptions, photographs, or statements herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners.

LIMITED WARRANTY: For applicable warranty terms and conditions, please see complete details online at community.musictribe.com/pages/support#warranty.

Controls

The following controls are available on the speaker units:

1. DSP display: Backlit display for DSP functions.
2. AUX IN: Connect a media player via 1/8" TRS cable. Stereo signals are summed to mono. Gain controlled by CH1 VOLUME.
3. BLUETOOTH LED: Flashes when Bluetooth is on and searching; solid when connected.
4. BLUETOOTH BUTTON: Press to turn Bluetooth on/off. Volume adjusted via MASTER control.
5. OUTPUT: Sends combined signals from CH1 and CH2 INPUTS via XLR male connector to another device.
6. VENTS: Ventilation openings.
7. MASTER: Controls overall volume level. Push to access DSP functions.
8. CH1 VOLUME: Adjusts gain for INPUT 1 and AUX IN. Set above midway for mic signals, lower for line-level signals.
9. CH2 VOLUME: Adjusts gain for INPUT 2. Set above midway for mic signals, lower for line-level signals.
10. CH1 INPUT: Connect audio sources using balanced XLR or 1/4" cables.
11. CH2 INPUT: Connect audio sources using balanced XLR or 1/4" cables.
12. POWER INPUT: Connect a standard IEC power cable. To replace a fuse, carefully remove the fuse holder, replace the fuse with the same type, and push the holder back into the slot.
13. POWER SWITCH: (DR115DSP only) Flip to ON position to power the speaker after all audio connections are made.
14. AUTO STAND-BY BUTTON: (DR112DSP/DR110DSP only) Activates auto standby; speaker turns off after 60 minutes without input signal. Power returns automatically when a signal is received.
15. AUTO STAND-BY LED: (DR112DSP/DR110DSP only) Red LED lights when auto standby is active.
16. POWER BUTTON: (DR112DSP/DR110DSP only) Press to turn the speaker on after all audio connections are made.
17. FAN VENT: Fan ventilation.

DSP Functions

The MASTER knob is used to navigate and control DSP functions:

Sound Programs: Select from MUSIC, DJ, LIVE, or SPEECH presets by pressing the MASTER knob twice and scrolling.
3-band EQ: Adjust HIGH EQ (treble), MID EQ (mid-range), and LOW EQ (bass) by +/- 12 dB. Press the MASTER knob to enter the frequency menu and rotate to adjust.
Boost: Selectable frequencies (OFF, 80, 100, 120, or 150 Hz) to add +6 dB output. Accessed by turning the MASTER knob until 'SUB' appears.
Delay: Adjust signal delay for synchronizing with other speakers. Accessed by turning the MASTER knob until DELAY appears.
LED Mode: Control the front panel LED behavior (ON, OFF, or LIMIT to indicate limiter engagement). Accessed by turning the MASTER knob until LED MODE appears.

Specifications

Feature	DR115DSP	DR112DSP	DR110DSP
Amplifier Max. Output Power	1400 W*	1200 W*	1000 W*
Type	Class-D + Class-AB
Protection	Auto-standby, short circuit, open circuit, thermal
Controls	Rotary push-encoder, input gain controls
Woofer	1 x 15" (381 mm) LF driver	1 x 12" (305 mm) LF driver	1 x 10" (254 mm) LF driver
Tweeter	1 x 1.75" (44.4 mm) HF compression driver	1 x 1.35" (34.4 mm) HF compression driver	1 x 1.35" (34.4 mm) HF compression driver
Frequency Response	45 Hz 19 kHz (3 dB)	50 Hz 19 kHz (3 dB)	55 Hz 19 kHz (3 dB)
Nominal Dispersion	90 H x 60 V
Maximum SPL	136 dB	134 dB	132 dB
Crossover	2-way, active
Limiter	Independent input HF, LF
Audio Connections (Input 1/2)	2 x XLR / " TRS combo jacks (servo-balanced)
Impedance (Input 1/2)	20 kΩ, balanced / 10 kΩ, unbalanced	20 kΩ, balanced / 10 kΩ, unbalanced
Sensitivity (Input 1/2)	-26 dBu, nominal	-26 dBu, nominal
Max. input level	0 dBu	0 dBu
Aux in	1 x 1/8" TRS, stereo
Output	1 x XLR
Impedance (Output)	200 Ω balanced, 100 Ω unbalanced	200 Ω balanced, 100 Ω unbalanced
Max. output level	-7 dBu	-7 dBu
DSP Display	LCD 128 x 32, amber backlit
Factory EQ presets	Music, DJ, Live, Speech
Equalization	Low: 12 dB @ 80 Hz, shelving; Mid: 12 dB @ 2.5 kHz, parametric, Q = 0.5; High: 12 dB @ 12 kHz, shelving
Low-cut filter	80 / 100 / 120 / 150 Hz, switchable
DSP Protection	Lockout function for all settings
Bluetooth Frequency range	2402 MHz ~ 2480 MHz
Bluetooth Channel number	79
Bluetooth Version	Bluetooth spec 4.2 compliant
Bluetooth Compatibility	Supports A2DP 1.2 profiles
Bluetooth Max. communication range	15 m (without interference)
Bluetooth Max. output power	< 10 dBm
Power Supply/Voltage (Fuses) USA/Canada/Japan	100-120 V~, 50/60 Hz (T 5 AL 250 V)	100-120 V~, 50/60 Hz (T 3.15 AL 250 V)	100-120 V~, 50/60 Hz (T 3.15 AL 250 V)
Power Supply/Voltage (Fuses) UK/Australia/Europe/Korea/China	230 V~, 50 Hz (T 3.15 AL 250 V)	230 V~, 50 Hz (T 2 AL 250 V)	230 V~, 50 Hz (T 2 AL 250 V)
Power consumption @ 1/8 max power	105 W	75 W	75 W
Mains connection	Standard IEC receptacle
Dimensions (H x W x D)	687 x 422 x 390 mm (27.0 x 16.6 x 15.3")	602 x 359 x 359 mm (23.7 x 14.1 x 14.1")	521 x 302 x 312 mm (20.5 x 11.9 x 12.3")
Weight	21.6 kg (47.5 lbs)	17.2 kg (37.8 lbs)	13.3 kg (29.3 lbs)

*Independent of limiters and driver protection circuits.

**The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Music Tribe is under license.

Compliance Information

FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States

Email Address: legal@musictribe.com

FCC ID: QWHDSP

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution! Changes or modifications not expressly approved by Music Tribe can void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

CE COMPLIANCE: Music Tribe declares that this product is in compliance with Directive 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU (amended by 2015/863/EU), 2012/19/EU, Regulation 519/2012 REACH SVHC, and Directive 1907/2006/EC. Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S, Gammel Strand 44, DK-1202 Kbenhavn K, Denmark

UK Representative: Music Tribe Brands UK Ltd., 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom

	Behringer PK108A/PK110A Active PA Speaker System Quick Start Guide Get started quickly with the Behringer PK108A and PK110A active PA speaker systems. This guide covers setup, controls, media player, Bluetooth connectivity, and essential safety information.
	Behringer EUROLIVE B115MP3/B112MP3 PA Speaker System Quick Start Guide Comprehensive quick start guide for the Behringer EUROLIVE B115MP3/B112MP3 active PA speaker system. Covers safety instructions, hook-up diagrams, control descriptions, getting started steps, and specifications. Features include a 1000W amplifier, MP3 player, and wireless option.
	Behringer EUROLIVE B115MP3/B112MP3 Quick Start Guide Get started quickly with your Behringer EUROLIVE B115MP3/B112MP3 active 2-way PA speaker system. This guide covers essential safety instructions, hook-up procedures, control descriptions, getting started steps, specifications, and important information.
	Behringer EUROLIVE B115W/B112W Quick Start Guide A comprehensive guide to setting up and operating the Behringer EUROLIVE B115W/B112W Active 2-Way PA Speaker System, including safety instructions, hook-up diagrams, controls explanation, and Bluetooth connectivity.
	Behringer PK112A/PK115A Quick Start Guide: Setup and Operation Get started quickly with the Behringer PK112A and PK115A Active PA Speaker Systems. This guide covers setup, controls, connections, Bluetooth pairing, and basic operation for these 600/800-Watt speakers with built-in media players and mixers.
	Behringer EUROLIVE B115D/B112D Quick Start Guide A concise guide to setting up and operating the Behringer EUROLIVE B115D and B112D active PA speaker systems, covering hook-up, controls, and basic operation.
	Behringer B1X Quick Start Guide: Portable PA Speaker Setup and Operation Get started with your Behringer B1X All-in-One Portable PA Speaker. This guide covers setup, controls, Bluetooth connectivity, app integration, DSP functions, and specifications for this 250-watt speaker with digital mixer and effects.
	Behringer EUROLIVE B115W/B112W Active PA Speaker System Quick Start Guide Concise guide to setting up and operating the Behringer EUROLIVE B115W/B112W active 2-way PA speaker system with Bluetooth wireless technology, wireless microphone option, and integrated mixer.