Quick Start Guide

Important Safety Instructions

• Terminals marked with this symbol (⚡) carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with 1/4" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
• This symbol (⚠️), wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.
• This symbol (⚠️), wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
• Caution: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.
• Caution: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Caution: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Use only attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• Correct disposal of this product: This symbol (♻️) indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
• Do not install in a confined space, such as a book case or similar unit.
• Do not place naked flame sources, such as lighted candles, on the apparatus.
• Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
• This apparatus may be used in tropical and moderate climates up to 45°C.

Hook-up and Setup

Step 1: Hook-Up

Wireless connection with Bluetooth smartphone streaming.

Step 2: Controls

• 1. POWER: The POWER switch turns the speaker on.
• 2. Power Input: Plug the included IEC power cable into this jack.
• 3. Fuse Replacement: Replace a blown fuse here.
• 4. STEP 1 / PAIR: Button and indicator connect your Bluetooth device. Press and release the STEP 1 button.
• 5. STEP 2 / STEREO LINK: Button and indicator link the B115W/B112W to another similar speaker. Press and release the STEP 2 button. The LED will flash while linking, and then light solid when the other speaker successfully links.
• 6. BLUETOOTH VOLUME: Controls the relative volume of the Bluetooth sound in the overall mix.
• 7. MIX OUTPUT: Sends a copy of the source signal to another speaker using an XLR cable.
• 8. Input Connections: Connect a microphone, balanced mixer output, or the MIX OUTPUT from another speaker using a balanced cable with a male XLR plug. Connect a 1/4" mixer output or other line level signal into the center of the XLR/TRS combination jack.
• 9. INPUT 1 and INPUT 2: Knobs adjust the input sensitivity (gain) for the XLR/TRS combination jacks, as well as the wireless microphone receiver.
• 10. CLIP LED (Input): Lights when the input signal begins to overload.
• 11. HIGH EQUALIZER: Cuts or boosts treble frequencies by ±15 dB.
• 12. CLIP LED (Output): Lights when the main output signal begins to overload.
• 13. LOW EQUALIZER: Cuts or boosts bass frequencies by ±15 dB.
• 14. Wireless Mic Receiver Input: Connect optional Behringer wireless microphone receiver here.
• 15. Wireless Mic Signal Indicators: LEDs indicate wireless microphone signal input.

NOTE: The connection range between speaker and Bluetooth streaming device may decrease if Bluetooth streaming and wireless microphones are used simultaneously.

Step 3: Getting Started

• Placement: Place the speaker(s) in desired locations, either on stands or as wedge monitors on the floor.
• Connections: Make all necessary connections. DO NOT turn on the power yet.
• Power On Source: Turn on your audio source (mixer, microphone).
• Power On Speaker: Turn on your speaker(s) by pressing the POWER SWITCH (⏻). The POWER LED will light up.
• Audio Playback: Play your audio source or speak into your microphone at a normal to loud level.
• Volume Adjustment: Adjust the LEVEL knob to the desired volume. If the CLIP LED flashes, turn the LEVEL knob down. If using multiple speakers, the LEVEL knob must be adjusted on each speaker.
• Tone Adjustment: If necessary, adjust the HIGH and LOW EQUALIZER knobs on each speaker to boost or cut treble and bass frequencies to taste.

Optional Wireless Microphone Set-up

• 1. Receiver Input: Only insert the optional Behringer DIGITAL WIRELESS microphone receiver into the input.
• 2. Activate Microphones: Activate the microphones by pressing the VOLUME UP button on each microphone.

Bluetooth Connection Procedure

• NOTE: These Bluetooth speakers can only link with another speaker of the same model. For example, a B112W speaker will only link with another B112W.
• 1. Enable Bluetooth: Make sure Bluetooth (?) is enabled on your Bluetooth device.
• 2. Set Bluetooth Volume: Turn the BLUETOOTH VOLUME knob all the way down to the MIN setting.
• 3. Pair Speaker: Press and release the STEP 1 button to pair the speaker with your Bluetooth device. The PAIR LED will flash while connecting to your Bluetooth device. When Bluetooth has successfully paired with your device, the PAIR LED will light solid.
• 4. Enter PIN: In your Bluetooth device, enter the PIN code: 0000 (Bluetooth version 2.0 and above will not require a PIN code).
• 5. Link Speakers: Press and release the STEP 2 button to link your B115W/B112W speaker with another similar speaker. The STEREO LINK LED will flash while connecting to your Bluetooth device. When Bluetooth has successfully paired with your device, the STEREO LINK LED will light solid.
• 6. Start Playback: Begin playback on your Bluetooth device.
• 7. Adjust Listening Level: Slowly turn the BLUETOOTH VOLUME clockwise until you find a comfortable listening level.

Specifications

*Independent of limiters and driver protection circuits

**The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by MUSIC Group is under license. Bluetooth audio streaming performance and range vary by make and model of smart phone and can be affected by Wi-Fi networks or wireless microphones such as the Behringer ULTRALINK. Avoid use of Bluetooth audio streaming where such devices are in use.

Other Important Information

• Important Information: Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
• Malfunction: Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under "Support" at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
• Power Connections: Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FCC Compliance Information

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 5270 Procyon Street, Las Vegas NV 89118, United States

Phone Number: +1 702 800 8290

FCC ID: QWHB112W-B115W

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important information: Changes or modifications to the equipment not expressly approved by Music Tribe can void the user's authority to use the equipment.

Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user authority to operate the equipment.

FCC RF Radiation Exposure Statement: (1) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (2) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/53/EU, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC. Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark