Behringer EUROLIVE B115MP3/B112MP3 Quick Start Guide

Important Safety Instructions

CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN!

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

• Caution: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.
• Caution: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Caution: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Use only attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
• Do not install in a confined space, such as a book case or similar unit.
• Do not place naked flame sources, such as lighted candles, on the apparatus.
• Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
• This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.

Hook-up

This section describes how to connect your EUROLIVE B115MP3/B112MP3 system.

Connections:

• Connect a microphone (e.g., XM8500 dynamic mic) to a mixer input.
• Connect optional Behringer DIGITAL WIRELESS microphones and receiver.
• Connect the mixer's MIX OUTPUT to the speakers, labeled as "Stereo pair" and "Slaved to secondary pair".

Controls

The EUROLIVE B115MP3/B112MP3 features several controls for operation:

• POWER Switch (1): Turns the speaker on/off.
• IEC Power Input (2): Connect the included IEC power cable here.
• Fuse Replacement (3): Replace a blown fuse at this location.
• MIX OUTPUT (4): Sends a copy of the source signal to another speaker using an XLR cable.
• Inputs (5): Connect a microphone, balanced mixer output, or the MIX OUTPUT from another speaker using a balanced cable with a female XLR plug. Connect a ¼" mixer output or other line level signal into the center of the XLR/TRS combination jack.
• INPUT 1 & INPUT 2 Knobs (6): Adjust the input sensitivity (gain) for the XLR/TRS combination jacks.
• CLIP LED (7): Lights up when the input signal begins to overload.
• LOW EQUALIZER (8): Cuts or boosts bass frequencies by +/- 15 dB.
• HIGH EQUALIZER (9): Cuts or boosts treble frequencies by +/- 15 dB.
• CLIP LED (10): Lights up when the main output signal begins to overload.
• Wireless Microphone Receiver Input (11): Connect optional Behringer wireless microphone receiver here.
• Wireless Signal LEDs (12): Indicate wireless microphone signal input.
• MP3 Player Controls (13): Used for playback of files from a USB flash drive.
• LEVEL Knob (14): Controls the MP3 player volume.
• LCD Window Display (15): Shows the status of the MP3 being played.
• USB Jack (16): Accepts standard USB flash drives.
• MODE and DISP(LAY) Buttons (17): Control the playback mode of the MP3 player and also serve as contrast controls for the LCD display.

Getting Started

1. Position the speakers in desired locations, either on stands or as wedge monitors on the floor.
2. Make all necessary connections. DO NOT turn on the power yet.
3. Turn on your audio source (mixer, microphone).
4. Turn on your speaker(s) by pressing the POWER SWITCH. The POWER LED will light up.
5. Play your audio source or speak into your microphone at a normal to loud level.
6. Adjust the LEVEL knob to the desired volume. If the CLIP LED flashes, turn the LEVEL knob down. If using multiple speakers, the LEVEL knob must be adjusted on each speaker.
7. If necessary, adjust the HIGH and LOW EQUALIZER knobs on each speaker to boost or cut treble and bass frequencies to taste.
8. Connect a USB flash drive to the USB port. Switch between folders on the drive using the FOLDER buttons. Select the track you wish to play using the TRACK buttons. Press the PLAY/PAUSE button to start or stop playback.
9. Press the REPEAT button and then the MODE button to select between repeating: ALL mp3 files on the USB drive, files in the current FOLDER, the currently playing file (SINGLE) or to play all files in RANDOM order.
10. Press the DISP(LAY) button to change what appears on the screen of the MP3 player between the TAG (artist and song name information), TRACK (file name up to 64 characters) or TIME (shows track number in current folder and the elapsed time of the currently running track).
11. Press the DISP(LAY) and MODE buttons at the same time to cycle between screen contrast intensities.
12. Adjust the playback volume using the LEVEL knob.

Specifications

Other Important Information

Important Information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under "Support" at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FCC Compliance Information

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer

EUROLIVE B115MP3/B112MP3

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 5270 Procyon Street, Las Vegas NV 89118, United States

Phone Number: +1 702 800 8290

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information: Changes or modifications to the equipment not expressly approved by Music Tribe can void the user's authority to use the equipment.

CE Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.

Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S

Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark