Behringer EUROLIVE B115MP3/B112MP3

Important Safety Instructions

Terminals marked with this symbol [⚡] carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol [!] wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol [!] wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

Caution: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
18. Do not install in a confined space, such as a book case or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
21. Use this apparatus in tropical and/or moderate climates.

LEGAL DISCLAIMER

MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2017 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding MUSIC Group's Limited Warranty, please see complete details online at music-group.com/warranty.

Hook-up Diagram Description

The diagram illustrates connecting the EUROLIVE speaker system. A Behringer X1204USB mixer is shown as the central audio source. A microphone (XM8500) is connected to the mixer's input. The mixer's output is connected to the EUROLIVE speaker. An optional BEHRINGER DIGITAL WIRELESS microphone receiver is shown connected to the speaker's wireless input. Another speaker is depicted connected as a "Slaved to secondary pair," indicating a daisy-chain setup for stereo or multiple speaker configurations.

Controls

The speaker features various controls for operation:

1. POWER switch: Turns the speaker on/off.
2. IEC power cable jack: Connect the included power cable here.
3. Fuse holder: For replacing a blown fuse.
4. MIX OUTPUT: Sends a copy of the source signal to another speaker using an XLR cable.
5. XLR/TRS combo input: Accepts microphones, balanced mixer outputs, or other line-level signals.
6. INPUT 1 and INPUT 2 LEVEL knobs: Adjust the input sensitivity (gain) for the respective combo jacks.
7. CLIP LED (Input): Illuminates when the input signal begins to overload.
8. LOW EQUALIZER: Cuts or boosts bass frequencies by +/- 15 dB.
9. HIGH EQUALIZER: Cuts or boosts treble frequencies by +/- 15 dB.
10. CLIP LED (Main Output): Illuminates when the main output signal begins to overload.
11. WIRELESS SYSTEM input: Connects optional BEHRINGER wireless microphone receivers.
12. Wireless LEDs: Indicate the status of the wireless microphone signal input.
13. MP3 player controls: Buttons for playback of files from a USB flash drive (PLAYBACK, FOLDER, TRACK).
14. LEVEL knob (MP3 Player): Controls the MP3 player volume.
15. LCD window: Displays the MP3 playback status (e.g., track name, time).
16. USB jack: Accepts standard USB flash drives for MP3 playback.
17. MODE and DISP(LAY) buttons: Control MP3 playback mode and LCD screen contrast.

Getting Started

Initial Setup

1. Place the speaker(s) in desired locations, either on stands or as wedge monitors on the floor.
2. Make all necessary connections. Do not turn on the power yet.
3. Turn on your audio source (mixer, microphone).
4. Turn on your speaker(s) by pressing the POWER SWITCH. The POWER LED will light up.
5. Play your audio source or speak into your microphone at a normal to loud level.
6. Adjust the LEVEL knob to the desired volume. If the CLIP LED flashes, turn the LEVEL knob down. If using multiple speakers, the LEVEL knob must be adjusted on each speaker.
7. If necessary, adjust the HIGH and LOW EQUALIZER knobs on each speaker to boost or cut treble and bass frequencies to taste.

USB MP3 Playback

1. Attach a USB flash drive to the USB port.
2. Switch between folders on the drive using the FOLDER buttons. Select the track you wish to play using the TRACK buttons.
3. Press the PLAY/PAUSE button to start or stop playback.
4. Press the REPEAT button and then the MODE button to select between repeating: ALL mp3 files on the USB drive, files in the current FOLDER, the currently playing file (SINGLE), or to play all files in RANDOM order.
5. Press the DISP(LAY) button to change what appears on the screen of the MP3 player between TAG (artist and song name information), TRACK (file name up to 64 characters), or TIME (shows track number in current folder and the elapsed time of the currently running track).
6. Press the DISP(LAY) and MODE buttons simultaneously to cycle through screen contrast intensities.
7. Adjust the playback volume using the LEVEL knob.

Optional Wireless Microphone Setup

1. Insert the optional BEHRINGER DIGITAL WIRELESS microphone receiver into the input.
2. Turn the ON/OFF switches on the microphones to the "ON" position.
3. The LED on the receiver will flash during the pairing process. Once the connection between the wireless microphone and the receiver is achieved, the LED will remain on (solid).
4. Speak into the wireless microphones and adjust the volume using the volume buttons on the individual microphones. Press and hold the volume down button for two seconds to mute the microphone signal. Press the volume up button to unmute the microphone.

Specifications

Amplifier:

• Low-frequency range: 45 Hz to 20 kHz (B115MP3) / 50 Hz to 20 kHz (B112MP3)
• Max output power: 700 W* (LF), 300 W* (HF)
• Crossover frequency: 2.2 kHz (B115MP3) / 2.8 kHz (B112MP3)
• Limiter: Yes
• Equalizer: High (+/-15 dB @ 12 kHz), Low (+/-15 dB @ 80 Hz)

Audio Inputs:

• XLR (servo-balanced): Sensitivity -36 dBu to 0 dBu, Input impedance 14 kΩ
• 1/4" TRS jack (servo-balanced): Sensitivity -36 dBu to 0 dBu, Input impedance 14 kΩ

USB port/MP3 player:

• Connector: USB Type A
• File system: FAT 16, FAT 32
• Format: MP3 (CBR & VBR)
• Bit rates: 32-320 kbps
• Sample rates: 32 kHz, 44.1 kHz, 48 kHz

Wireless system:

• Connector: USB 3.0
• Frequency band: 2.4 GHz
• Frequency response (Wireless Link): 20 Hz - 20 kHz (+0/-2.5 dB)
• Range: Max. 80 m (line of sight)

Audio Outputs:

• Mix: XLR, balanced
• Level Control: - ∞ to +36 dB
• Input trim: +18 dBu (Max. input level)

Loudspeaker System Data:

• Power Supply Voltage (Fuses): USA/Canada 120 V, 60 Hz (T 6.3 A H 250 V); UK/Australia 240 V~, 50 Hz (T 3.15 A H 250 V); Europe 230 V~, 50 Hz (T 3.15 A H 250 V); Japan 100 V~, 50-60 Hz (T 6.3 A H 250 V)
• Power consumption: max. 110 W
• Mains connection: Standard IEC receptacle

Dimensions/Weight:

• B115MP3 Dimensions (H x W x D): 713 x 427 x 313 mm (28.1 x 16.8 x 12.3")
• B115MP3 Weight: 17.7 kg (38.9 lbs)
• B112MP3 Dimensions (H x W x D): 568 x 342 x 270 mm (22.4 x 13.4 x 10.6")
• B112MP3 Weight: 12.5 kg (27.6 lbs)

Other Important Information

Registration

Register your new MUSIC Group equipment online at behringer.com to help process repair claims more quickly and efficiently. Review warranty terms and conditions.

Malfunction Handling

If your local MUSIC Group Authorized Reseller is not nearby, contact your country's Authorized Fulfiller listed under "Support" at behringer.com. If your country isn't listed, check the "Online Support" section at behringer.com for solutions. Alternatively, submit an online warranty claim at behringer.com BEFORE returning the product.

Power Connections

Ensure you are using the correct mains voltage for your model. Replace faulty fuses only with fuses of the same type and rating.

Federal Communications Commission (FCC) Compliance Information

Responsible Party: MUSIC Group Services NV Inc.

Address: 5270 Procyon Street, Las Vegas, NV 89118, USA

Phone Number: +1 702 800 8290

The EUROLIVE B115MP3/B112MP3 complies with FCC Rules Part 15. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. No guarantee is made against interference in a particular installation. If interference occurs, users are encouraged to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a different circuit than the receiver.
• Consulting the dealer or an experienced radio/TV technician.

This device complies with Part 15 of the FCC rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important information: Changes or modifications not expressly approved by MUSIC Group can void the user's authority to operate the equipment.