Yaheetech 592070 Cat Tree Assembly Instructions
Important Information & Recommendations
- Recommended: 2 or more people for assembly.
- Estimated assembly time: 1 hour.
- Warning: Not intended for use by children.
- Safety: Keep away from fire and heat sources.
- Recommendation: Wear protective gloves during assembly.
Please follow the instruction manuals carefully. Use a protective pad or blanket on your floor to avoid damage to the product and your flooring during assembly.
Parts List
| Part # | Description | Quantity |
|---|---|---|
| 1 | Allen Wrench | x1 |
| 2 | Screw (35mm) | x4 |
| 3 | Screw (25mm) | x2 |
| 4 | Screw | x27 |
| 5 | Screw | x1 |
| 6 | Screw | x4 |
| 7 | Base Panel | x1 |
| 8 | Middle Panel | x1 |
| 9 | L-shaped Panel | x1 |
| 10 | Ramp | x1 |
| 11 | Cat Bed/Seat | x1 |
| 12 | Round Perch | x2 |
| 13 | Enclosed Box A | x1 |
| 14 | Enclosed Box B | x1 |
| 15 | Sisal-wrapped Post (24cm) | x1 |
| 16 | Sisal-wrapped Post (42cm) | x1 |
| 17 | Sisal-wrapped Post (24cm) | x1 |
| 18 | Wooden Post (21cm) | x8 |
| 19 | Wooden Post (32cm) | x1 |
| 20 | Wooden Post (8.5cm) | x3 |
| 21 | Wooden Post (32cm) | x1 |
| 22 | Wooden Post (40cm) | x1 |
| 23 | Wooden Post (24cm) | x2 |
| 24 | Wall Anchor & Screw | x1 |
Assembly Steps
Step 1
Attach Enclosed Box B (14) to four Wooden Posts (18) using eight Screws (4).
Step 2
Attach Enclosed Box A (13) to four Wooden Posts (18) using eight Screws (4).
Step 3
Attach two Wooden Posts (23), one Sisal Post (15), and one Short Wooden Post (20) to the Base Panel (7) using three Screws (4) and the Allen Wrench (1).
Step 4
Attach the Ramp (10) to the L-shaped Panel (9) using two Screws (2) and two caps (3). Then, attach this assembly to the Base Panel (7) using two Screws (2).
Step 5
Attach one Sisal Post (16) and two Wooden Posts (18) to the L-shaped Panel (9) using one Screw (4) and one Screw (5).
Step 6
Attach one Sisal Post (16), one Short Wooden Post (20), and one Medium Wooden Post (19) to the Middle Panel (8) using one Screw (4) and two Screws (6).
Step 7
Attach one Short Wooden Post (20) to the Middle Panel (8) using two Screws (4).
Step 8
Attach one Short Wooden Post (20) and one Long Wooden Post (22) to a platform using two Screws (6).
Step 9
Attach one Round Perch (12) to the structure.
Step 10
Secure the top of Enclosed Box A (13) using three Screws (4).
Step 11
Attach one Sisal Post (17) and one Wooden Post (21) to the structure using two Screws (4).
Step 12
Attach the Cat Bed/Seat (11) and one Round Perch (12) to the top of the structure.
Step 13
For stability, secure the cat tree to a wall using the provided Wall Anchor & Screw (24). Follow the diagram for proper installation.
Customer Support & Additional Information
If you are not entirely satisfied with your purchase, please contact Yaheetech customer support. Follow these steps:
- Go to "Your Orders".
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the displayed list.
- Select "Contact seller".
Manufactured in the People's Republic of China (PRC).
Importer Information
Yahee GmbH
Hans-Grüninger-Weg 11
71706 Markgröningen
You can also download the electronic Installation Manual from the "Product guides and documents" section of the advertising page.
