Yaheetech Cat Tree Assembly Instructions and Safety Guide
Important Information
Important / Wichtig / Atención / Important / Importante
- 1 or more people recommended for installation.
- Approximate assembly time: 1 hour.
- Not intended for use by children.
- Keep away from fire or other heat sources.
- Wearing protective gloves is recommended during assembly.
Assembly Preparation
Please follow the instruction manuals and use a protective pad or cover to avoid damage to the product and floor during assembly. (Incorrect method shown) (Correct method shown with pad).
Parts List
| Item | Description | Quantity |
|---|---|---|
| 1 | Flat rectangular panel | 1x |
| 2 | Flat rectangular panel with a circular cutout | 1x |
| 3 | Shaped multi-level panel | 1x |
| 4 | Flat rectangular panel | 1x |
| 5 | Tall, narrow rectangular panel | 1x |
| 6 | Cube-shaped base with arched openings on sides | 1x |
| 7 | Square platform with a hanging ball toy | 1x |
| 8 | Short cylindrical tube (27cm length) | 4x |
| 9 | Long cylindrical tube with textured grip (50cm length) | 2x |
| 10 | Long cylindrical tube (50cm length) | 3x |
| 11 | Medium cylindrical tube with textured grip (40cm length) | 1x |
| 12 | Short cylindrical tube (24.5cm length) | 2x |
| 13 | Long cylindrical tube (20cm length) | 1x |
| 14 | Metal clip/hook | 1x |
| A | Screw (approx. 25mm length) | 19x |
| B | Bolt (approx. 25mm length) | 3x |
| C | Screw (approx. 25mm length) | 1x |
| D | Metal bracket | 2x |
| E | Screw (approx. 15.5mm length) | 4x |
| F | Wall anchor and screw | 1x |
| G | Allen key | 1x |
Assembly Steps
Step 1
Attach the cube-shaped base (6) to the bottom panel using eight screws (A). The cube has arched openings on its sides.
Shows the cube base (6) being attached to a surface with screws (A) labeled and indicated with arrows. Part (8) is shown but not attached in this step.
Step 2
Attach the flat base panel (1) to the structure. Then, attach two long textured tubes (9) and three long tubes (10) to panel (1) using four screws (A) in total.
Shows panel (1) being attached to the base. Tubes (9) and (10) are then attached vertically to panel (1) using screws (A).
Step 3
Attach the tall, narrow rectangular panel (5) to the flat rectangular panel (2) using two metal brackets (D) and four screws (E). Panel (2) has a circular cutout.
Shows panel (5) being connected to panel (2) with brackets (D) and screws (E). An enlarged view shows the detail of attaching bracket (D) with screws (E).
Step 4
Attach two short tubes (12) and one long textured tube (9) to the main structure. Use two screws (A) and two bolts (B). Attach the ramp to the side.
Shows the assembly progressing. Tubes (9) and (12) are attached to the structure. Screws (A) and bolts (B) are indicated. The ramp is shown attached to the side.
Step 5
Attach the flat panel (4) to the top of the structure using one bolt (B). Then, attach the cube (6) to the structure using one screw (C).
Shows panel (4) being attached to the top. The cube (6) is then attached to the structure below panel (4) using screw (C).
Step 6
Attach the shaped multi-level panel (3) to the top of the structure using four screws (A). Attach the long tube (13) to the structure.
Shows panel (3) being attached to the upper section of the cat tree. Tube (13) is also shown being attached.
Step 7
Attach the square platform (7) to the top of the structure using one screw (A). Attach the medium textured tube (11) to the platform (7) using one screw (A).
Shows the platform (7) being attached to the top. Tube (11) is then attached to platform (7).
Step 8
Attach the metal clip/hook (14) to the structure using hardware (F). This is likely for wall mounting or securing.
Shows the metal clip/hook (14) being attached to the cat tree using hardware (F). An enlarged view shows the detail of the clip and attachment.
Support and Contact Information
If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech customer support using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the list displayed.
- Select "Contact seller".
Imported by: Yahee GmbH, Höpfigheimer Straße 11.7, 4321 Bietigheim-Bissingen.
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
