IMPORTANT
Please follow the instruction manuals and use a pad to avoid damage during assembly.
For easier and better assembly, 1 or more adults are required.
The expected assembly time for this product is approximately 1 hour, depending on the individual's manipulative ability.
Safety and Care Instructions
- Not intended for use by children. Please keep your children closely supervised. ❌?
- Keep away from fire or other heat sources. ?❌
- Do not use harsh cleaner for cleaning. ?❌
- We recommend wearing protective gloves for assembly. ?
- Identify, sort and count the parts before assembly. ✔️?
- The warning, cautions and instructions listed in this manual may not cover all possible situations that may arise when using the product. Please contact Yaheetech via help@yaheetech.shop if you need further help.
Parts List
- Part 1: Long screw (x1)
- Part 2: Short screw (x2)
- Part 3: Screw (x35)
- Part 4: Screw (x1)
- Part 5: Screw (x1)
- Part 6: Screw (x1)
- Part 7: Screw (x1)
- Part 8: Screw (x1)
- Part 9: Screw (x1)
- Part 10: Screw (x1)
- Part 11: Screw (x1)
- Part 12: 45cm post (x2)
- Part 13: 38.5cm post (x2)
- Part 14: 29cm post (x1)
- Part 15: Medium post (x2)
- Part 16: Medium post (x2)
- Part 17: 27cm post (x1)
- Part 18: Base board (x1)
- Part 19: Small platform (x8)
- Part 20: Fabric hammock (x1)
- Part 21: Cat bowl (x1)
Assembly Steps
Step 1
Attach two posts (7) and two posts (8) to the base board (18) using screws (3) and (6). Then, attach four small platforms (19) to the posts (7) and (8) using screws (3), (7), (8), (19), and (20).
Step 2
Take the base board (5). Attach two 45cm posts (12) and two 38.5cm posts (13) to it using screws (3), (5), (12), (13), and (20).
Step 3
Attach the fabric hammock (20) and a small platform (19) to the structure from Step 1 using screws (3), (6), and (21).
Step 4
Attach the base board (5) from Step 2 to the structure from Step 1 using screws (3), (5), and (20).
Step 5
Attach the cube (2) and two medium posts (15) to the base board (3) using screws (3), (4), (10), (15), and (16).
Step 6
Attach two medium posts (15) and two medium posts (16) to the base board (4) using screws (3), (4), (8), and (10).
Step 7
Attach the cube (6) and two 45cm posts (10) to the base board (3) using screws (3), (6), (10), and (11).
Step 8
Attach two posts labeled (17) and two posts labeled (18) to the base board (3) using screws (3), (17), and (18). Note: There may be a discrepancy in part labeling in the original diagram for this step.
Step 9
Attach the top perch (9) with the toy and the cat bowl (21) to the structure using screws (3), (9), and (11).
Step 10
Final check. Ensure all fastenings are tight.
Maintenance
Check every 6 months that all assembly fastenings are properly tightened and retighten when necessary. ⚙️?
Contact Information
For any questions or assistance, please contact Yaheetech at: help@yaheetech.shop
