JLab GO WORK HEADPHONES WITH MICROPHONE
We're glad you like your JLab! We are proud of our products and stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab manufacturer approval and our discretion. Keep your proof of purchase to ensure warranty rights.
CONTACT US
Contact us at support@jlab.com or visit intl.jlab.com/contact.
REGISTER TODAY
Visit intl.jlab.com/register for product updates, usage tips, and FAQs.
BLUETOOTH PAIRING
1. On your device, turn on Bluetooth.
2. Press and hold the button for 8 seconds. Release. Lights will flash blue/red. (Diagram: Shows a smartphone with Bluetooth settings open, then a headphone with a button being pressed, indicating pairing mode.)
3. In your device settings, select 'JLab GO Work' to connect. (Diagram: Shows a smartphone connected to 'JLab GO Work' via Bluetooth.)
MULTIPOINT PAIRING (CONNECT 2 DEVICES SIMULTANEOUSLY)
1. When the FIRST device is connected, turn off Bluetooth in your device settings. GO Work will automatically enter Bluetooth pairing mode. (Diagram: Shows a smartphone connected to 'JLab GO Work' via Bluetooth.)
2. Go to the Bluetooth settings of the SECOND device and connect to GO Work. (Diagram: Shows a smartphone connecting to 'JLab GO Work' via Bluetooth.)
3. Go to the Bluetooth settings of the FIRST device. Turn on Bluetooth and reconnect to GO Work. (Diagram: Shows a smartphone reconnecting to 'JLab GO Work' via Bluetooth.)
For more information and troubleshooting for MULTIPOINT pairing, visit: INTL.JLAB.COM/MULTIPOINT
BUTTON FUNCTIONS
- VOLUME UP: Press once
- NEXT TRACK: Press and hold for over 2 seconds
- VOLUME DOWN: Press once
- PREVIOUS TRACK: Press and hold for over 2 seconds
- POWER ON/OFF: Press and hold for over 2 seconds
- PLAY/PAUSE/ANSWER/END CALL: Press once
- REJECT INCOMING CALL: Press and hold for over 1 second
- ACTIVATE SIRI (iOS) OR 'OK GOOGLE' (ANDROID): Press twice
- MICROPHONE MUTE ON/OFF: Triple press (during a call)
- BLUETOOTH PAIRING: See 'Bluetooth Pairing'
- SWITCH EQ BETWEEN VOICE/MUSIC: Press and hold both buttons simultaneously
BOOM MICROPHONE: Can be rotated left or right.
MICROPHONE MUTE ON/OFF: Toggle the mute switch.
(Diagram: Shows headphone buttons, EQ switch, boom mic rotation, mute toggle. Icons for volume up/down ➕/➖, play/pause ▶️/⏸️, next/previous track ⏩/⏪. Mute icon ?.)CHARGING
Connect to a computer or a USB 5V 1A (or lower) output device.
Note: GO Work can charge simultaneously while connected via Bluetooth. Turn on and connect to your device after charging.
(Diagram: Shows headphones connected via USB cable to a computer and a wall adapter.)AUX INPUT
GO Work can be used as wired headphones with an AUX cable.
Note: The headphones with microphone will still use limited battery capacity for microphone functionality.
(Diagram: Shows headphones connected via AUX cable to a smartphone.)CAUTION
- Avoid moisture or liquid on the headphone earcups.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the headphones, straining the cable with quick pulls or extreme force, and bending the cable at sharp angles.
- Earwax may accumulate on the headphone earcups, causing reduced sound quality. Carefully remove wax with a cotton swab or small tool to restore sound quality.
- If you feel discomfort or pain, try lowering the volume or stop using the headphones temporarily.
- If you experience persistent discomfort while using this product, discontinue use and consult a doctor.
- We recommend treating your headphones like quality sunglasses and storing them safely when not in use.
GET THE MOST FROM YOUR GO WORK
Explore more with the JLab Store and our Burn-in Tool.
Download the JLab App:
