Vimar By-me Plus XT Smart Automation Devices
This document provides technical details for the Vimar By-me Plus XT smart automation devices, including models 32021.x, 32023.x, 32024.x, and 32044.x.
Product Descriptions
- 32021.x: XT control device for By-me home automation with 2 pushbuttons. Configurable as a single-pole double-throw switch, with status and localization LED in the dark, adjustable intensity, and central LED matrix for symbol customization or animation. 1 front module.
- 32023.x: XT control device for By-me home automation with 2 pushbuttons. Configurable as a single-pole double-throw switch, proximity sensor function, LED with status or scenario animation and localization in the dark, adjustable intensity, and central LED matrix for symbol customization or animation. 1 front module.
- 32024.x: XT control device for By-me home automation with 4 pushbuttons, proximity sensor function, LED with status and localization in the dark, adjustable intensity. 1 front module.
- 32044.x: XT control device for By-me home automation with 4 pushbuttons, backlit CLIMA symbols and localization in the dark, adjustable intensity. 1 front module.
Features
- Power Supply: On electrified XT support art. 32602.x, 32603.x, 32604.x, 32613.x or 32614.x and corresponding node art. 32001.
- Maximum BUS Absorption: 32021.x: 7.5 mA; 32023.x, 32024.x, 32044.x: 12.5 mA.
- Red LED and configuration/reset pushbutton.
- Operating Temperature: -5 °C to +45 °C (indoor use).
- Occupies 1 front module of 30.5 mm.
- Selectable standby light levels via corresponding settings.
- Connection on the back of the electrified support 32602.x, 32603.x, or 32604.x.
- Protection Rating: IP20.
- Pushbutton and single-pole double-throw functional blocks can be associated with a single group (group depth 1).
| Feature | Art. 32021.x | Art. 32023.x | Art. 32024.x | Art. 32044.x |
| 2 configurable buttons, also as single-pole double-throw | ✓ | ✓ | ✓ | ✓ |
| Central white LED matrix for programmable symbols or animation | ✓ | ✓ | ✓ | |
| White LED vertical bar for animation | ✓ | ✓ | ✓ | |
| 2 white LEDs, upper and lower, for status indication | ✓ | ✓ | ||
| White LED matrices, upper and lower, for programmable symbols for status indication or animation | ✓ | ✓ | ||
| 4 pushbuttons | ✓ | ✓ | ||
| 4 white LEDs corresponding to pushbuttons for status indication | ✓ | ✓ | ||
| 4 backlit CLIMA symbols corresponding to pushbuttons for thermostat status indication | ✓ | |||
| Proximity sensor function | ✓ | ✓ | ✓ |
CONFIGURATION WITH THE View Pro APP. For complete information, consult the manuals available for download on the www.vimar.com website.
Installation Instructions
The circuit must be installed by qualified technicians, in compliance with the regulations governing electrical equipment installation in the country concerned.
Install the device on electrified XT supports:
- 2 modules art. 32602.x (for 2-module box)
- 3 modules art. 32603.x and 32613.x (for 3-module rectangular box)
- 4 modules art. 32604.x and 32614.x (for 4-module rectangular box)
To optimize operation, it is recommended to leave only one proximity sensor (proximity sensor function) active per lighting point, disabling the others.
Important Considerations for Proximity Sensors:
- Avoid installing two or more commands with an active proximity sensor facing each other if the distance is less than 4 meters: [visual representation of two devices facing each other with a distance indicator '< 4 m'].
- Avoid installing a button with an active proximity sensor in front of a device equipped with an infrared receiver to prevent interference.
- When disassembling the button, inserting labels, and fixing the button, be careful not to dirty or scratch the proximity sensor lens.
Conformity to Standards
Low Voltage Directive, EMC Directive, RoHS Directive.
Standards: IEC 60669-2-1, EN 50491-2, EN IEC 63044, EN IEC 63000.
REACH Regulation (EU) No 1907/2006 - art.33. The product may contain traces of lead.
CE Marking
WEEE Information for users: The crossed-out wheeled bin symbol on the product or packaging indicates that the product must be separated from other waste at the end of its life cycle. Users must hand over the appliance to a municipal selective collection center for electronic and electrotechnical waste. In addition to autonomous management, the holder can also hand over the appliance to be disposed of free of charge to a retailer when purchasing a new appliance of equivalent characteristics. Retailers of electronic equipment with a sales area greater than 400 m² will collect end-of-life electronic products free of charge, without obligation of purchase, provided that the dimensions of the appliance do not exceed 25 cm. Selective collection aimed at recycling, reprocessing, and environmentally sound disposal of the appliance helps to prevent environmental pollution and its effects on health, and promotes the reuse of its components.
VIMAR
Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
