JLab JBuds Air Pro True Wireless Earbuds

Warranty and Support

Your Warranty: All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

Contact Us: Reach out to us at support@jlab.com or visit jlab.com/contact for FAQs & more.

Register Today for product updates and how-to tips.

Bluetooth Pairing

1. Take earbuds out of the case and remove stickers. Place earbuds back in the case and close the door.
2. Blue lights on the case indicate charging. Remove earbuds from the case.
3. One earbud will blink blue/white, indicating it is ready to pair to your device. Select "JLab JBuds Air Pro" in your device's Bluetooth settings to connect.

Adding New / Additional Bluetooth Devices: Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from the new device. Earbuds will automatically enter Bluetooth Pairing.

Button Functions

Left Earbud

• Volume Down: Single tap
• Siri (iOS) or "OK Google" (Android): Double tap
• Music/Movie Mode: Press & hold 1+ sec
• Turn On: Press & hold 3+ sec
• Change EQ: Triple tap (JBuds Air Pro will cycle through 3 EQ settings)

Right Earbud

• Volume Up: Single tap
• Answer Call: Single tap
• Hang Up Call: Double tap
• Reject Incoming Calls: Press & hold 1+ sec
• Play/Pause: Double tap
• Track Forward: Press & hold 1+ sec
• Turn On: Press & hold 3+ sec
• Be Aware: Triple tap

Custom EQ3 Sound Modes

Tap either the right or left earbud 3 times for different EQ settings. JBuds Air Pro will cycle through 3 EQ settings:

• JLab Signature: JLab C3™ signature sound with amplified bass and vocals.
• Balanced: Even sound with no additional enhancements.
• Bass Boost: Amplified bass and sub-bass.

Charging Earbuds

Placing the earbuds in the charging case will automatically power them OFF and start charging. Blue lights indicate earbuds are charging and will turn OFF when fully charged. Removing the earbuds will automatically power them ON and connect to the last device.

Charging Case

Connect the JBuds Air Pro to a computer or USB 5V 1A (or less) output device. LEDs pulse white when charging and turn solid white when fully charged.

Multipoint (Connect 2 Devices Simultaneously)

1. Once the FIRST device is connected, turn off Bluetooth in its device settings. JBuds Air Pro will automatically enter Bluetooth Pairing.
2. Enter your SECOND device's Bluetooth settings and connect to JBuds Air Pro.
3. Enter your FIRST device's Bluetooth settings. Turn on Bluetooth and connect to JLab JBuds Air Pro.

Fitting

Try all the optional Cush Fins™ and ear tips for the best fit and proper seal. Place the earbud in your ear and rotate for the best fit.

Troubleshooting: No Audio in One Earbud or Earbuds Disconnected (Manual Reset)

1. Keep both earbuds in the charging case and forget "JLab JBuds Air Pro" in your device's Bluetooth settings.
2. Quickly tap 7 times on one earbud in the charging case. The earbud will blink blue 4 times.
3. Quickly tap 7 times on the other earbud in the charging case. The earbud will blink blue 4 times.
4. Take both earbuds out of the charging case. One earbud will blink blue/white, indicating it is ready to pair to your device.

Instructional videos are available at: JLAB.COM/MANUALS

Quick Tips

• Either earbud can connect to your device and be used independently. Simply take out the earbud from the charging case, and it will auto-connect.
• Choosing the correct ear tip makes a significant improvement in audio quality due to a proper seal for the driver. Try all ear tips for best results.

Warning

Fully dry off the earbuds before putting them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant, but the case is not.

Cautions

• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• Treat your earbuds as you would a nice pair of sunglasses and keep them in a safe location when not in use.

Shop products | Product alerts | Burn-in your headphones

JLab Store + Burn-in Tool