Baby Trend Snap-N-Go GX Universal Infant Car Seat Carrier

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered or removed serial number, invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.

The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00 AM and 4:30 PM (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Warranty is valid only in North America.

Parts List

Verify that you have all the parts for this model before assembling the stroller.

Important Safety Warnings

⚠️ WARNING: Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference.

⚠️ WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out, always use the safety harness and ensure that the children are properly positioned according to these instructions.

⚠️ WARNING: Never leave children unattended.

⚠️ WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

• Only approved Snap Tech™ products can be used on the frame.
• CAUTION: This single stroller is designed for one child only. Use with more than one child may cause an unbalance condition which can injure or harm your child.
• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.
• The maximum weight that can be carried in the storage basket is 10 pounds (5.54 kg). The maximum weight that can be carried in the parent tray is 3 pounds (1.36 kg). Excessive weight may cause a hazardous unstable condition to exist.
• Be certain the stroller is completely opened and locked in place before allowing a child near the stroller.
• Use of the stroller with a total weight more than 65 lbs (29.48 kg) will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.
• NEVER use the stroller on stairways or escalators.
• NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.
• NEVER allow your stroller to be used as a toy.
• To clean, use only mild household soap or detergent and warm water on a sponge or clean cloth.
• Check your stroller regularly for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.
• Discontinue use of stroller if it malfunctions or becomes damaged. Please contact our customer service department to arrange for repair or obtain replacement parts.

Assembly Instructions

IMPORTANT! To ensure safe operation of your stroller, please follow these instructions carefully. Please keep these instructions for future reference.

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.

IMPORTANT! Adult assembly is required.

Remove stroller from box. The front and rear wheels MUST be installed prior to use.

Front Wheels Installation

To attach the front wheels, unfold the stroller as described below:

1. Unlock the release lever (Figure 1a) and unfold the stroller frame by pulling upward on the stroller handle until the frame locks (Figure 1b).
2. Lean the stroller backward and push each front wheel assembly into the front wheel housing until they lock into place (Figure 1c). NOTE: Pull on the wheel assembly to ensure that it is securely attached to the stroller.
3. To remove the front wheels, push the release button on the side of the wheel hub and pull the wheel assembly from the hub (Figure 1d).

Rear Wheels Installation

1. Lean the stroller forward and press the rear wheel post into the rear frame hub until it clicks into place (Figure 2a). NOTE: Pull on the rear wheel to ensure that it is securely attached to the stroller.
2. To remove the rear wheels, push the tab outward and pull the wheel from the hub (Figure 2b).

Basket Installation

1. The basket tube needs to be installed prior to use. Insert the ends of the Basket Tube into the basket frame until it locks into place (Figure 3a).
2. Snap the buttons of the basket flap over the Basket Tube (Figure 3b).

Multi-Position Handle Adjustment

1. To adjust the handle, press the release buttons to move it up or down into a comfortable position for the user (Figure 4). NOTE: Make sure the handle clicks into place before using.

Parent Tray Attachment

⚠️ WARNING: To avoid burns, never put hot liquids in the cup holder. Avoid possible tipping; do not place more than 1 lb. (0.45kg) in the cup holder.

1. Attach the parent tray to the frame by wrapping the ends of the parent tray over the handles of the frame and snapping the strap buttons closed (Figure 5).

Attaching Universal Car Seat Adapter

⚠️ WARNING: Avoid serious injury from falling or sliding out; always use the Infant Car Seat harness.

CAUTION: Avoid serious injury from falling; always use the safety belt to secure the car seat to the stroller.

• Only approved Snap Tech™ products can be used on the stroller frame.

1. Attach the Universal Car Seat Adapter by lining up the anchors on the side of the car seat adapter with the anchors on the stroller frame and pushing them together until they click securely (Figure 6a).
2. Place the car seat onto the adapter frame. The car seat can face in either direction, forward or backward (Figure 6b).
3. Strap the Safety Belts through the Belt Path on the Car Seat and connect the buckles together (Figure 6c). Tighten the strap so it fits snugly and the car seat is secured to the frame. Tighten the bottom support straps, located on the back of the upper frame, by pulling back on the loop and sliding the adjuster forward for a snug fit (Figure 6d). NOTE: The Safety Belt must be installed through the Car Seat Belt Path before using this product.

Attaching Snap Tech™ Infant Car Seat

⚠️ WARNING: Avoid serious injury from falling or sliding out; always use the Infant Car Seat harness.

• Only approved Snap Tech™ products can be used on the frame.

1. Attach the car seat by lining up the seat anchors on the side of the car seat with the anchors on the stroller frame and push them together until they lock securely (Figure 7).

To Remove Infant Car Seat/Adapter

1. To take off the infant car seat or adapter, push both center buttons on each side of the seat and lift the seat upwards (Figure 8). DO NOT remove with child in the seat.

Safety Features

Brakes

⚠️ WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

1. To engage brakes, apply downward pressure to the brake lever located on the rear axle. The stroller might need to be rolled back and forth to fully engage the brake (Figure 9). NOTE: Check that the stroller will not move once the brakes are properly applied.
2. To release, gently lift up on the brake lever.

Front Wheel Lock

1. The front wheels are equipped with a swivel locking device. Push the button on each wheel up to release the lock and push downward to engage the lock (Figure 10).

Fold / Unfold Instructions

To Fold Stroller

⚠️ WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

CAUTION: Do not allow children near stroller while folding.

1. Pull the stroller backward several inches to adjust the front wheels to the front.
2. Fold the stroller by pulling both release triggers (Figure 11a) and push the handle toward the floor. Make sure the front wheels lie flat, then secure the stroller in the folded position by locking the fold latch, located on the right side of the stroller, over the rivet (Figure 11b).

To Unfold Stroller

CAUTION: Do not allow children near stroller while unfolding.

1. Unlock the release lever (Figure 12a) and unfold stroller frame by pulling upward on the stroller handle until the frame locks (Figure 12b).

Care and Maintenance

• Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.
• Discontinue use if the stroller malfunctions or becomes damaged. Contact customer service for repair or replacement parts.