Baby Trend Snap-N-Go Pro Infant Car Seat Carrier

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers manufacturing defects for one year from the date of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or if the serial number has been altered or removed, invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.

Customer Service can be contacted at 1 (800) 328-7363, Monday through Friday, between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

For complete warranty details, please visit http://babytrend.com/pages/limited-warranty.

Safety Warnings

WARNING: Please follow all instructions to ensure your child's safety. Keep these instructions for future reference.

WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out; always use the safety harness and ensure children are properly positioned.

WARNING: Never leave children unattended.

WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment. Be aware of potential pinch points.

WARNING: Purses, shopping bags, parcels, diaper bags, or accessory items may change the stroller's balance, causing an unstable condition.

WARNING: The maximum weight for the storage basket is 5 pounds (2.26 kg). The maximum weight for the parent tray is 3 pounds (1.36 kg). Excessive weight can cause an unstable condition.

WARNING: Ensure the stroller is fully opened and locked before allowing a child near it.

WARNING: Using the stroller with a total weight exceeding 65 pounds (29.48 kg) will cause excessive wear and stress, potentially leading to an unstable condition.

NEVER use the stroller on stairways or escalators.

NEVER use the stroller with roller skates, in-line skates, skateboards, or bicycles.

NEVER allow your stroller to be used as a toy.

Cleaning: Use only mild household soap or detergent and warm water with a sponge or clean cloth.

Maintenance: Regularly check for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.

Discontinue use if the stroller malfunctions or becomes damaged. Contact customer service for repair or replacement parts.

Parts Identification

Before assembling, check that you have all the parts for this model. Verify all parts are present.

• Mobile Phone Positioning Parent Tray
• Stroller Frame
• Rear Wheels
• Front Wheel

Note: Wheel styles may vary.

Assembly Instructions

IMPORTANT: To ensure safe operation, follow these instructions carefully. Adult assembly is required.

Handle Assembly

1. To set up the stroller, extend the handle by rotating it outward until it clicks into position. [Click Sound Indicator ?]

Wheel Attachment

Front Wheels:

2. Locate the front wheel hub with the insertion hole. Insert the front wheel into the hub in the indicated direction. Repeat for the other wheel. NOTE: Pull on the wheel assembly to ensure it is securely attached.

To remove front wheels: Push the release button on the side of the wheel hub and pull the wheel assembly from the hub.

Rear Wheels:

3. Locate the rear wheel hub with the insertion hole. Insert the rear wheel into the hub in the indicated direction. Repeat for the other wheel. NOTE: Pull on the wheel assembly to ensure it is securely attached.

To remove rear wheels: Press the release button and pull out the wheel.

Opening the Stroller:

4. Release the fold latch by pulling it outward. Put the frame upright and firmly pull backward on the stroller handle to snap the frame open. NOTE: The frame must fully click into position.

Frame Bar:

5. Use the top edge to rotate the frame bar open. The two side latches should click into place. IMPORTANT: Do not attempt to attach the car seat without setting the frame bar correctly.

Basket Attachment:

6. If adjustment or replacement is needed: Snap the three front buttons of the basket fabric onto the front tube. Then, snap the three rear buttons onto the rear tube.

Parent Tray and Mobile Phone Positioner:

7. To insert the parent tray:

(1) Face the tray with the prominent arch side towards the canopy.

(2) Align the parent tray tabs with the inner tabs on both sides of the stroller. Press the tray down firmly until both tabs click into position. [Click Sound Indicator ?]

Mobile Phone Positioner: Align your mobile phone to the clip and insert it through the grips. Ensure the phone is pushed all the way down into the positioner. NOTE: The positioner may not accommodate all mobile phones or devices. Do not use as a secure holder when the stroller is not in use, or if your phone is loose or too large.

To remove the parent tray: Locate the parent tray tabs under the stroller frame. Press them inwards and lift the tray from the housing.

Handle Adjustment:

8. To adjust the handle, press the buttons to move the handle up or down to a comfortable position. NOTE: Use only the positions that click into place.

Brakes:

9. To engage brakes, apply light downward pressure to the brake lever on each rear wheel. You may need to move the stroller slightly forward or backward to align the brake teeth with the wheel brake cluster. NOTE: Check that the stroller will not move and both brakes are properly applied. To release, gently lift up on the brake lever.

Folding the Stroller:

10. Locate the release triggers on the frame near the handle. Fold the stroller by pulling both release triggers and pushing the handle toward the floor. Ensure the front wheels fold neatly within the frame. Use the fold latch to close the stroller.

For a compact fold: Collapse the handle by pressing the two buttons inward. Unlock the frame bar with the two latches and rotate it inward.

Unfolding the Stroller:

11. To unfold the stroller, extend the handle by rotating it outward until it clicks into position. Release the fold latch by pulling it outward. Put the frame upright and firmly pull backward on the stroller handle to snap the frame open. NOTE: The frame must fully click into position. Set the frame bar by referring back to step 5.

Infant Car Seat Attachment

WARNING: Avoid serious injury from falling or sliding out; always use the Infant Car Seat harness.

CAUTION: Avoid serious injury from falls; always use the safety belt to secure the car seat to the stroller.

12. Place the car seat onto the upper frame. NOTE: The car seat must always face the parent, and the rear support tabs must securely rest on the upper frame.

Strap the safety belts over the car seat and connect the buckles. Tighten the strap so it fits snugly and the car seat is secured to the frame. NOTE: Some car seats have a belt path; feed the safety belt through it if applicable.

Tighten the support straps on the frame bar. Press the clip ends together while holding the strap end. Push the clip upwards for a snug fit. To loosen, press the clip ends together to release and pull down.

Infant Car Seat Removal:

13. Undo the strap and remove it completely from the car seat. Using the carry handle, lift the car seat off carefully. NOTE: You may need to set the carry handle into its carry position.

Customer Service and Product Compatibility

Baby Trend Customer Service can be contacted at 1 (800) 328-7363, Monday through Friday, between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s).

The Snap-N-Go® Pro Infant Car Seat Carrier accepts all Baby Trend® and most major brands of Infant Car Seats. Visit www.babytrend.com for more information.