Baby Trend Double Snap N Go Stroller

Product Overview

Model # 1305TW

Car seats not included.

Tagline: Convenience through innovation and thoughtful design.

Copyright © 2006 - 2008, Baby Trend Inc., All Rights Reserved.

Important Safety Warnings

WARNING:

Follow all instructions to ensure your child's safety. Keep these instructions for future reference.

WARNING:

Failure to follow these instructions could result in serious injury or death. To avoid serious injury from slipping or falling, always use the safety harness and ensure the child is positioned correctly according to these instructions.

WARNING:

Never leave a child unattended.

WARNING:

Be careful not to pinch your fingers when folding and unfolding the stroller.

• This product is designed for two baby car seat carriers and two babies. NEVER use this product with one baby car seat.
• Handbags, shopping bags, parcels, diaper bags, or other items can affect the stroller's balance and make it unstable or dangerous.
• The maximum weight that can be carried in the basket is 4.52 kgs (10 lbs) and on the parent tray is 1.36 kgs (3 lbs).
• Ensure the stroller is fully upright and locked in the open position before allowing a child near it.
• Excessive weight can affect the stroller's balance and make it unstable or dangerous. DO NOT EXCEED 36 kgs (80 lbs) TOTAL.
• The stroller is designed for use with two (2) children weighing no more than 13.6 kgs (30 lbs) each, or a total weight not exceeding 36 kgs (80 lbs) total. Using the stroller with children weighing over 40.7 kgs (90 lbs) total may cause excessive wear and stress on the stroller, which can affect the stroller's balance and make it unstable or dangerous.
• NEVER use the stroller on stairs or escalators.
• NEVER allow your stroller to be used as a toy.
• To clean, use only mild soap or household detergents with warm water and a soft sponge or cloth.
• Regularly check your stroller for loose screws, worn parts, worn material, or torn stitching. Replace or repair parts.
• Discontinue using the stroller if it malfunctions or is damaged. Please contact our Customer Service Parts Hotline to arrange for repair or replacement of parts.

If you experience difficulty with the use of this product or have questions regarding these instructions, contact our customer service department at 1-800-328-7363 between 8:00 AM and 4:30 PM Pacific Time. Please do not return this item to the store as once returned, it cannot be resold, thus wasting the materials and energy used to manufacture it.

Parts and Assembly

Parts List

• Stroller frame
• Rear axle
• Parent tray
• Front wheels (x2)
• 1" Indented bar (x2)
• Straight bar

Assembly Instructions

TO ENSURE YOUR STROLLER FUNCTIONS SAFELY, PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

1. Remove the stroller from the box. NOTE: the front wheels, rear wheels, parent tray, and support bars specific to your baby car seats must be installed before use.
2. To attach the front wheels, unfold the stroller and tilt it backward so it rests on the handle and rear frame with the front wheel tubes facing upwards. (See Fig. 1). Position the front wheel onto the top of the tube so that the hole in the swivel assembly slides onto the front wheel tube end. Push each front wheel until it locks onto the front tube. Pull on the wheel to ensure it is securely attached to the stroller. (See Fig. 2)
3. Tilt the stroller forward so it rests on the front wheels. To attach the rear wheels, position the rear axle so that the brake levers face the rear of the stroller. (See Fig. 3.1). Insert the rear wheel onto the rear frame, ensuring that the locks on the front of each rear tube engage with the hole on the side of each rear wheel. (See Fig. 3.2). Pull on the rear wheel to ensure it is securely attached to the stroller.

NEVER use the stroller if the wheels are not properly attached. If necessary, contact our customer service immediately at 1-800-328-7363, between 8:00 AM and 4:30 PM PST, for assistance.

Fig. 1 Description: Illustrates tilting the stroller backward to access front wheel tubes.

Fig. 2 Description: Shows attaching a front wheel by sliding it onto the tube until it clicks. Text indicates: "Slide onto the wheel tube", "Align tubes with wheel slots", "Slide both sides of the wheels onto the tubes simultaneously", "Push each wheel firmly until it locks", "The wheels are locked when the metal tab snaps into the upper hole of each wheel".

Fig. 3 Description: Depicts attaching rear wheels, aligning tubes with wheel slots, pushing until locked, and checking for secure attachment.

Operation

Parent Tray Installation

Fig. A Description: Shows how to attach the parent tray to the frame. Ensure the storage hinges face forward and the tray is securely closed.

Brakes

WARNING: Always lock the brakes when the stroller is not in motion so the stroller does not roll. Never leave the stroller unattended on a hill or incline as the stroller could roll down the hill.

To engage the brakes, apply light downward pressure on the locking lever located on each rear wheel. Engaging the brakes may require a slight forward or backward movement to align the teeth on the brake with the wheels. (See Fig. 4). Check that the stroller does not move and that the brakes are properly applied. To release the brakes, gently lift the brake lever.

Fig. 4 Description: Illustrates engaging the rear wheel brakes.

Folding the Stroller

WARNING: NEVER leave children near the stroller during folding.

The front section must be folded to reduce the size of the folded stroller. To fold the front, slide the plastic latches and then pull up on the frame. Push backward on the front frame while simultaneously turning so that everything rests on the rear part of the chassis. (See Fig. 8a and 8b).

To fold the stroller, slide the small red button on top of the handle to the left with your thumb, then squeeze the red lever on the other side while pushing forward. (See Fig. 5). Once the stroller begins to fold, release the red handle and pull backward on the chassis until the stroller is completely folded. Lock the folded stroller in the closed position by attaching the locking strap. The locking strap is located on the right side of the stroller at the intersection of the handle and the rear tube on the rivet located at the bottom of the chassis. (See Fig. 6).

Fig. 5 Description: Shows the mechanism for folding the stroller handle.

Fig. 6 Description: Depicts the locking strap used to secure the folded stroller.

Unfolding the Stroller

WARNING: NEVER leave children near the stroller during unfolding.

1. Release the locking strap located on the right side of the stroller.
2. Pull up on the stroller handle with both hands until the frame is upright and locked in the open position. (See Fig. 7). The stroller has spring-loaded locks on both sides of the frame. Ensure both locks are fully engaged before placing your child in the stroller.
3. Extend the front frame by pulling and turning simultaneously. (See Fig. 8b). Slide both plastic latches forward, then backward so that both lock firmly onto the front tubes of the stroller frame. (See Fig. 8a).

Fig. 7 Description: Shows pulling up the handle to unfold the stroller, highlighting the spring-loaded locks.

Fig. 8a Description: Illustrates sliding the front frame latches to lock the stroller open.

Fig. 8b Description: Shows extending the front frame.

Attaching Infant Car Seats

WARNING: When loading, position the rear car seat first, then the second car seat in the front. When unloading, remove the front car seat first, then the rear car seat second.

1. Place the car seats onto the support bars. (See Fig. 9). Please refer to the table on the following page for bar positions. (See Fig. 12). NOTE: Some brands of baby car seats lock onto the front, and some brands simply rest on the bar. You MUST ALWAYS use the seat belt to ensure the seats are properly secured.
2. Attach the seat belt over the car seat and buckle it. Tighten the seat belt so it is snug and prevents the seat from moving. (See Fig. 10). NOTE: Some car seats have slots through which the seat belt must be threaded; if you have a car seat with these slots, thread the seat belt through each slot before attaching the seat. (See Fig. 11).

WARNING: To avoid serious injury from falling, ALWAYS use the safety harness to secure both car seats to the stroller.

Fig. 9 Description: Shows car seats being placed on the stroller's support bars.

Fig. 10 Description: Illustrates securing a car seat with the vehicle's seat belt.

Fig. 11 Description: Shows threading a seat belt through car seat slots.

Car Seat Compatibility and Bar Positions

Fig. 12 Description: Diagram of the stroller frame with labels for different bars (Straight bar, 1" Indented bar, Swivel bars) and attachment points (A, B, C, D, E).

Customer Service and Support

To reach us:

Baby Trend, Inc.
1607 S. Campus Ave.
Ontario, CA 91761

Customer Service: 1-800-328-7363
8:00 AM - 4:30 PM Pacific Time

If you experience difficulty with the use of this product or have questions regarding these instructions, please contact our Customer Service Center at 1-800-328-7363 between 8:00 AM and 4:30 PM Pacific Time, or visit our website at www.babytrend.com. Please do not return this item to the store as once returned, it cannot be resold, thus wasting the materials and energy used to manufacture it.