Starfrit High Precision Scale
Instructions for Use
Specifications
- High precision strain gauge sensor
- Stainless steel weighing platform
- Units of measure include: grams (g), ounces (oz), carats (ct), grains (gn), Troy ounces (ozt), Tael (tl) and Pennyweight (dwt)
- Tare function
- Low battery and overload indicators
- Auto-off after three minutes or manual-off
- Capacity: 7 oz / 200 g
- Accuracy: 0.001 oz / 0.01 g
- Platform dimensions: 3" x 2.5" / 76 mm x 64.6 mm
- Blue backlight LCD screen dimensions: 0.9" x 0.4" / 23.8 mm x 11 mm
Batteries
Requires 2 AAA batteries (included).
Remove isolation sheet before use.
To Replace Batteries
- Open battery case cover underneath the scale.
- Take out the used batteries and install new ones. Make sure to respect the polarity.
- Close battery case cover.
LCD Screen
The LCD screen displays weight readings and unit indicators. It can show a negative value. Available weight units include: g (Gram), oz (Ounce), gn (Grain), ct (Carat), tl (Tael), ozt (Troy Ounce), and dwt (Pennyweight).
Buttons
- T Button: Tare function
- M Button: Mode and unit conversion
- Power Button: Turn ON / Turn OFF
Weighing Mode
- Place the scale on a solid and flat surface.
- Press the [Power] button to turn on the scale.
- Wait until the LCD screen shows "0.0" to start weighing.
- Press the [M] button to convert to the desired weight mode if needed.
- Load the object onto the scale. Always place the object in the center of the platform. The LCD screen will show the weight reading.
Unit Conversion
Press the [M] button to switch between different weight measures.
Example displays:
- 170.0 g
- 6.0 oz
- 109.3 dwt
Tare Function
To weigh different loads consecutively without removing loads from the scale, place the first load on the scale to obtain a weight reading. Press the [T] button to reset the LCD reading to "0.00" before adding the next load. You can repeat this operation.
Auto Shut Off & Manually Shut Off
The scale automatically shuts off if the display shows "0" or the same weight reading for 3 minutes. To maximize battery life, it is recommended to shut off the scale manually by pressing the [Power] button for 3 seconds.
Indicators
- LO: Please replace batteries.
- O-LO: Remove item to avoid damage. Maximum capacity of this scale is 7 oz / 200 g.
- unSt: Place the scale on a flat and stable position.
Advice for Use & Care
- Always use the scale on a hard flat surface.
- Clean the scale with a slightly damp cloth.
- Avoid contact with water. DO NOT immerse the scale in water.
- Clean all plastic parts immediately after contact with fat, spices, vinegar, and strongly flavored/colored food.
- Avoid contact with acid citrus juices.
- DO NOT use chemical or abrasive cleaning agents.
- Not for commercial use.
Promotions
Subscribe to the newsletter to learn more about our promotions!
Visit www.Starfrit.com or www.facebook.com/starfrit.
