Sylvox 15.6-inch Mini Kitchen TV User Manual

Note: The product and illustrations in this user's manual are for explanation purposes only and may vary depending on the model.

General Information & Safety Instructions

To avoid damaging the television set, please observe the following safety instructions during setup and use:

Cleaning the Television Set

Before cleaning, disconnect the television set. Use only a soft damp cloth or a special cleaning product for flat-screens.

LED Display

Too much pressure on the screen can damage the television set.

Heat/Damp/Humidity

The television set should not be exposed to high temperatures (radiators, open fire) or used in areas with high humidity.

Condensation

If moved from a cool area to one with a higher temperature, the television set should be left for at least an hour before plugging it in. A rapid change of temperature can lead to condensation inside the set, potentially causing damage if the TV is in use.

Air Circulation

To prevent overheating, ensure the ventilation slots at the rear are always clear.

Small Objects

It is important to ensure that no small objects or liquids enter the television set, as they can cause damage or fire.

Liquids/Candles

Do not place anything holding a liquid or any candles on the television set.

Crushing

Take care to avoid crushing fingers or other objects when turning the television set in any direction.

Electric Supply

Use the television set only with the voltage indicated in the specifications. Ensure easy access to the plug for disconnection. Do not disconnect by pulling the power cable; always hold the plug. The power cable must not be kinked or placed over sharp edges.

Moving the Television Set

When moving the television set, hold only the casing.

Repairs/Accessories

Repairs and servicing must be undertaken only by authorized and trained personnel.

Retrieve

In accordance with the Batteries Regulation, batteries are to be disposed of only in provided containers.

⚠️ CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

In extreme weather (storms, lightning) and long inactivity periods, disconnect the TV set from the mains. The mains plug must remain readily operable for disconnection. If not disconnected, the device will still draw power even if in standby mode or switched off.

Important Warnings

IMPORTANT - Please read these instructions fully before installing or operating.

WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge use electrical devices unsupervised.

• The TV set is intended for Outdoor and similar general use but may also be used in public places.
• It is prohibited to enclose it in a sealed box or embed it in a wall.
• Ventilation should not be impeded by covering or blocking openings with items like newspapers, table-cloths, or curtains.
• The power cord plug should be easily accessible.
• Do not place the TV, furniture, etc. on the power cord.
• A damaged power cord/plug can cause fire or electric shock.
• Handle the power cord by the plug; do not unplug by pulling the cord.
• Never touch the power cord/plug with wet hands.
• Never make a knot in the power cord or tie it with other cords.
• When damaged, replacement should only be done by qualified personnel.

Wall Mounting Warnings

• Do not install the TV on an incline.
• Use the specified wall mounting screws and accessories.
• Tighten screws firmly to prevent the TV from falling, but do not over-tighten.
• A television set may fall, causing serious personal injury or death. Educate children about the dangers of climbing on furniture.

Accessories

Please ensure the following items are included with your TV. If any items are missing, please contact us.

• Television
• User's manual
• Warranty Card
• Batteries (AAA x 2)
• Adapter
• Remote control base
• Remote Control
• Screwdriver
• Fixed fittings

TV Specification

Note: Design and specification modifications may be made at any time without prior notice; all data and dimensions are approximations.

Installation

Diagram showing two sets of mounting holes labeled 'A' and 'B'. Hole set 'A' is for installations without horizontal rotation, while hole set 'B' is for installations requiring horizontal rotation. Dimensions for hole spacing are provided.

Installation Steps

1. Mark the fixing holes position according to the 'A' or 'B' holes on the bracket, ensuring sufficient space to flip the machine.
2. Pre-drill pilot holes before installing the TV for easier securing.
3. For wooden base: Drill a 5-20mm (0.20-0.79 inch) pilot hole, then secure the bracket with M6-L20 screws.
4. For concrete base: Drill a 7-40mm (0.28-1.57 inch) pilot hole, insert a plastic expansion pipe, and secure the bracket with M6-L20 screws.

Installation Modes

• Lifting formwork mode: Diagram showing the TV mounted on a base material with bracket and screws.
• Wall mounting mode: Diagram showing the TV attached to a wall bracket.

Overview

TV Front Panel

Diagram of the TV's front panel, highlighting the SPEAKER, POWER INDICATOR (red light for standby), and REMOTE CONTROL SENSOR. Buttons labeled INPUT, MUTE, CH+/-, VOL+/-, and POWER are shown.

TV Ports and Connections

Diagram illustrating the TV's rear and side ports, including:

• EARPHONE: For private listening.
• L/R AUDIO OUT: Connect to amplifier/home theater audio output jacks.
• MINI AV IN: For VIDEO signal input in Composite mode.
• USB: Connect USB devices.
• HDMI 1: For HDMI signal connection.
• HDMI 2 (eARC): For HDMI signal connection; supports eARC (Audio Transmission Function).
• RF: Connect to an antenna or cable (NTSC & ATSC).
• OPTICAL OUT: Digital audio output.
• RJ45: Ethernet connection.
• DC 12V: DC 12V input.

The diagram also shows connections for external devices like Camcorder, DVD Player, PC (HDMI-output), and Blu-ray disc player.

Remote Control Unit

Diagram of the Sylvox remote control with numbered buttons, detailing functions:

• 1. POWER: Turns the TV on and off.
• 2. MUTE: Temporarily cuts off sound; press again to resume.
• 3. Digital Buttons (0-9, -): Directly select channels.
• 4. INPUT: Opens the input source list.
• 5. NETFLIX: Accesses Netflix directly (if network connected).
• 6. YouTube: Accesses YouTube directly (if network connected).
• 7. Disney+: Accesses Disney+ directly (if network connected).
• 8. Prime Video: Accesses Prime Video directly (if network connected).
• 9. Profile: Switches user profiles.
• 10. Google Assistant: Opens Google Assistant.
• 11. Settings: Accesses system settings.
• 12. Arrow buttons ([Up Arrow]/[Down Arrow]/[Left Arrow]/[Right Arrow]): Navigate menus and change values.
• 13. OK: Confirms selection.
• 14. BACK: Returns to the previous menu.
• 15. Guide: Opens Live TV EPG.
• 16. HOME: Displays the HOME page.
• 17. VOL+/-: Adjusts volume.
• 18. CH+/-: Changes channels.
• 19. INFO: Displays channel information.
• 20. [Record Button]: Records TV programs in DTV mode.
• 21. APPS: Displays the app list.
• 22. LIST: Displays the channel list.
• 23. CC: Displays CC function menu.
• 24. [Virtual Keyboard Button]: Opens virtual keyboard in DTV source.
• 25. MTS/AUDIO: Switches audio track (USB mode) or MTS/Audio Language (TV mode).
• 26. DIGITAL MEDIA PLAYER CONTROL BUTTONS: Includes backward, forward, play/pause, stop in USB mode.
• 27. COLOR BUTTONS: Used in APPS.

General Description

Installing Batteries in the Remote Control

1. Use the accessory screwdriver to remove four screws from the battery cover and open it.
2. Insert two 1.5V AAA size batteries with correct polarity. Do not mix old/new or different types of batteries.
3. Secure the battery cover with the four screws. Keep the screwdriver.

Note: Battery life is approximately one year under normal use. Remove batteries if the remote will not be used for a long period. Do not mix old and new batteries, do not throw batteries into fire or water, and avoid exposing them to excessive heat.

Usage Tip: Point the remote towards the remote control sensor of the TV, effective within 7 meters. Dispose of used batteries responsibly.

External Connection - Antenna

The antenna input impedance of this unit is 75 ohms.

• VHF/UHF 75ohm coaxial cable can be connected directly.
• If using a 300ohm parallel flat feeder cable, a 300ohm/75ohm converter is required.

Diagrams show antenna connection types: Antennas with 300ohm flat twin leads requiring a converter, and antennas with 75ohm round leads using a 75ohm coaxial cable.

TV Operation

Initial Setup

1. Connect the TV to the power supply. The indicator light will be red after power-on. Press the [Power] button on the remote or TV to turn it on.
2. Pair the remote control with the TV. After successful pairing, the Bluetooth remote control can be used.
3. Press [Up Arrow]/[Down Arrow] to select the system language and press [OK] to confirm.
4. Press [Up Arrow]/[Down Arrow] to choose between setting up Google TV (requires Google account) or basic TV.
5. Scan the setup code to download the Google Home app on your phone for setup, or press [Up Arrow]/[Down Arrow] to set up on the TV.

Wi-Fi Setup

1. Confirm Wi-Fi is turned on and connected to the correct network.
2. If not connected, locate your network, select it, and enter the password if required.
3. Open an app to test the connection.

If issues persist, try turning the Wi-Fi option off and on again.

Mobile/Tablet Hotspot

Automatically adjusts video quality to use less mobile data. Data Saver increases watch time by up to 3x. Data usage alerts help monitor usage.

Location and Time Zone

Set your location and Time Zone. This helps provide local time, climate, and other information.

Daylight Saving

Configure Daylight Saving settings (Auto, Disable, Always On).

Tuner Mode

Set the Tuner mode (e.g., Cable + Antenna, Antenna, Cable), or choose to skip this step.

Settings Verification

Double-check your settings. After confirming with [OK], the TV can be used.

Home Screen and Input Source

Home Screen

After completing the setup wizard, you can watch TV and access the home screen. The home screen displays installed applications (favorites can be added/deleted/reordered), Google Assistant access, and search functionality.

Input Source

In the HOME interface, press the [Inputs] icon to open the input source list. Use the [Up Arrow] to highlight an input and press [OK] to switch.

Under live TV, press the SOURCE button to display the list of input sources and select the desired one.

Navigating the On-Screen Menu

In the HOME interface, press the [key] to select the circular settings menu icon and press [OK] to confirm.

Use [Up Arrow]/[Down Arrow] to select desired settings and press [OK] to enter the setting.

Settings Menu

Channels & Inputs

To set Channels and Inputs:

• Navigate to Settings > Channels & Inputs > Channels.
• Select your signal type.
• Select Channel Scan to start channel installation.

Inputs: Consumer Electronic Control (CEC) allows operation of linked functions between Sylvox brand devices. Interoperability with other brands may vary.

Display & Sound

To set Picture and Sound:

• Navigate to Settings > Display & Sound.
• Select Picture, Screen, or Sound options.

Picture Settings

• Picture Mode: Standard (normal viewing), Movie (cinematic), ECO (low power), Vivid (sharpness in bright rooms), Sports (high action), Game (PCs/consoles).
• Screen Brightness: Adjusts LED brightness for overall color brilliance.
• Advanced Settings: For detailed settings like Color Temperature, Noise Reduction, and Picture Reset.

Sound Settings

• Sound Mode: Standard (normal viewing), Movie (powerful sound), Music (optimized for playback), News (clear anchor voice), Personal (customized).
• Audio Output: Select output device (TV Speaker, SPDIF, Optical, HDMI-ARC).
• Digital Output: Auto/Bypass/PCM/Dolby Digital Plus/Dolby Digital.
• Digital Output Delay: Synchronizes audio and video by delaying the digital audio output.

Network & Internet

Setup network connection settings to use apps or network upgrade functions.

• Wi-Fi: Connect to a network by selecting it and entering the password.
• Scanning always available: Allows location services to scan for networks even when Wi-Fi is off.
• Ethernet: Configure Proxy and IP settings manually.
• Mobile/Tablet Hotspot: Use your device's hotspot for internet connection.

Notes: If you have issues, turn Wi-Fi off and on. Data Saver optimizes mobile data usage.

Accounts & Sign-in

Manage your Google account and kids profiles. Google TV profiles offer personalized recommendations and easy access to watchlists. You can add multiple Google accounts and sync media/activity across devices. Kids profiles allow setting app usage, bedtime reminders, and screen time limits.

Privacy

This section covers privacy settings for your TV, Google account, and applications.

• Location: Google may collect location data anonymously to improve accuracy and services.
• Usage & diagnostics: Automatically sends diagnostic information to Google. Permissions can be adjusted in device settings.
• Ads: Manage advertising ID settings.
• Google Assistant: Use Google Assistant for tasks and questions.

System Settings

Apps

View app settings, details, and permissions. Manage payment & purchases, security & restrictions.

Accessibility

Enhance accessibility with screen reader, closed captions, and Switch Access.

• To enable Accessibility features: Navigate to Settings > System > Accessibility.
• High contrast text: Turn on for experimental high contrast display.
• Text to speech: Configure output settings and TalkBack.
• Accessibility shortcuts: Quickly enable accessibility features.
• TalkBack: A screen reader providing spoken feedback. Configure speech volume, verbosity, etc.
• Switch Access: Enable Switch Access for alternative control methods.

Turn on closed captions: Navigate to Settings > System > Accessibility > Captions. Choose display options for size, font, color, etc.

About

Check system update and TV registration information.

System Functions

Reset

Restores device to default settings, erasing all data, accounts, files, and apps.

Date & Time

Set automatic or manual date/time, time zone, and 12/24-hour format.

Language

Set the on-screen display language (English, Español, Français).

Keyboard

Configure keyboard settings.

Storage

View internal shared and removable storage.

Ambient Mode

Set the TV to display Google Photos when idle.

Power & Energy

Configure power-on behavior.

Cast

Cast content from phones, tablets, or laptops to your Google TV.

Restart

Restarts the TV while keeping all settings. For factory reset (erasing all settings), navigate to Settings > System > About > Reset > Factory reset.

Remotes & Accessories

Bluetooth Connectivity

Connect Bluetooth devices like headphones or game controllers. Only one audio device can connect at a time.

Pairing a Bluetooth Device

1. From the home screen, go to Settings > Remote & Accessories > Pair accessory.
2. Ensure your device is in pairing mode.
3. Select the device from the list and press [Pair].

Paired accessories appear in Settings > Remote & Accessories. You can rename or forget devices.

Reconnect a Paired Device

1. From the home screen, go to Settings > Remote & Accessories.
2. Under "ACCESSORIES", choose your device.
3. Select [Connect].

Troubleshooting Bluetooth Connection Issues

• If a Bluetooth device won't connect, check the device or TV.
• Turn the Bluetooth device off and on again.
• Disconnect unused paired devices.
• Unplug the TV for 10 seconds, then plug it back in.
• Check if the Bluetooth device connects to other devices (phone, tablet).
• If it connects to other devices, reset your Google TV to factory settings.
• If it doesn't connect to other devices, check for device software updates or contact the manufacturer.

Read Before Using Apps

(*Terms & Conditions Apply)

• App availability, content, and services may vary by device, territory, and are subject to change without notice. Some apps may require additional peripherals or membership fees.
• The manufacturer is not responsible for interruptions of app services caused by service providers.
• Unstable internet connections can cause delays or interruptions.
• Application services and updates may become unavailable.
• Application content is subject to change by the service provider.
• Functionality may differ based on app version.
• Some applications may not support multitasking.
• Response to remote commands and on-screen display may be delayed during webpage loading.
• Copy and paste operations are not supported.
• Web browsing speed depends on the network environment.
• Playback of certain video/audio files may not be possible depending on supported codecs.
• The app store has limitations; while it includes many built-in apps, users cannot add apps from other media.

Troubleshooting

Check the following for potential solutions to common symptoms. These issues may be due to adjustment rather than malfunction. Contact Customer Care if problems persist.

WARNING

Never place a television set in an unstable location, as it may fall, causing serious personal injury or death. Take precautions such as:

• Using cabinets or stands recommended by the manufacturer.
• Using furniture that can safely support the television set.
• Ensuring the TV does not overhang the supporting furniture edge.
• Anchoring tall furniture and the TV to a suitable support.
• Avoiding placing the TV on cloth or other materials between the TV and furniture.
• Educating children about the dangers of climbing on furniture.

The plug or appliance coupler is used as the disconnect device and shall remain readily operable.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with limits for a Class B digital device. These limits provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and radiates radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur. If interference is experienced, try reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult a dealer or technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Warranty

Thank you for purchasing this Sylvox product. A 12-month free warranty is provided. For questions, contact Sylvox via after-sales email or website.

Customer Service Support

• Pre-sale: support@sylvoxtv.com
• After-sale: service@sylvoxtv.com
• Marketing: marketing@sylvoxtv.com
• Website: www.sylvoxtv.com
• Service Hotline: +1(866)979-5869 (Monday-Friday, 9:00 AM - 5:00 PM EST)

Warranty Policy

(1) Returning an Item:

1. Items purchased directly from www.sylvoxtv.com and authorized resellers (e.g., Amazon, Walmart) can be returned.
2. Returns from unauthorized third-party suppliers are not accepted.
3. Contact the original vendor with order ID/proof of purchase and issue details at service@sylvoxtv.com to request a return/refund/repair/replace. Sylvox will provide a shipping label.
4. Sylvox covers return shipping costs for quality-related issues for direct purchases. Contact retailers for their return process.
5. Sylvox reserves the right to charge a 20% restocking fee for returns without reason within 7 days of arrival; customer is responsible for freight costs.
6. Ensure returned items are in original condition with all documentation and accessories.
7. Deductions will be made for artificial damage affecting resale, missing accessories, or non-original packaging.
8. Requests are processed upon receipt of the returned item.

(2) Return for Refund (30-day money-back guarantee):

Contact Sylvox at service@sylvoxtv.com with your after-sales application, including order number/proof. Include item in original packaging with documentation/accessories. No refunds issued until item is received and verified.

Refunds

Refunds are initiated upon verification of product condition and processed according to the original payment method. Credit/debit card refunds typically appear within 7-10 business days.

Warranty Exclusions

The warranty does not cover:

• Improper use, repair by unauthorized personnel, or damage caused by user negligence.
• Damage from transportation, moving, or falling after purchase.
• Unavoidable external factors, water damage, or other solution damage.
• Failure caused by lightning strikes or other electrical system issues.
• Damage from using power supply other than specified voltage.

Warranty Period and Conditions

• Sylvox repairs the TV free of charge under normal use within 12 months.
• Sylvox warrants the product conforms to specifications and is free from defects in material and workmanship.
• Defects caused by abusive operation, negligence, accident, shipment damage, improper installation/application, tampering, modification, unauthorized repair, normal wear and tear, cosmetic damage, external/environmental conditions (voltage fluctuations, liquid spillage, acts of nature), missing model/serial numbers, use for rental/business, installation/setup charges, or signal reception problems are not covered.

No other entity is authorized to extend this warranty. Sylvox disclaims all other warranties, express or implied. Some states may not allow exclusion/limitation of incidental or consequential damages.

For questions, contact service@sylvoxtv.com.