Sygonix RFID/Keypad IP66 Programming Guide
Order Number: 3214306
Important Information
All programming must be performed in programming mode. To enter programming mode, double-enter the master code (factory setting "1234") in normal operation mode.
To reset the master code to factory settings, disconnect the keypad from power. Press and hold the button, then reconnect power to the keypad. Continue holding the button for an additional 3 seconds. When the keypad emits a short beep and the right LED turns green, the master code has been reset.
Programming Codes and Functions
| Programming Code | Programming Function | Values | Input Method | Settings | Default Setting |
|---|---|---|---|---|---|
| 4 | Change code length | 2-6/2-6 digits | Card read | 4-digit | |
| *7 | Program master transponder card | Read card | |||
| *7 | Delete master transponder card | Read card | |||
| *9 01 000 | Change master code (administrator) | Enter master code | 1234 | ||
| *2 01 000 | Program user card or user code for relay output 1 | 0-999 (user ID) | Read card/enter user code | ||
| *2 02 000 | Program user code for relay output 1 – 2nd option | 0-999 (user ID) | Enter user code | ||
| *2 03 000 | Program user card or user code for relay output 1 | 0-999 (user ID) | Read card/enter user code | ||
| *2 04 000 | Program user code for relay output 2 – 2nd option | 0-999 (user ID) | Enter user code | ||
| *4 00 | Program multiple transponder cards for relay output 1 | (Number) | Read card | Read cards one after another. All subsequent transponders are added automatically. | |
| *9 05 000 | Program multiple transponder cards with sequential serial numbers for relay output 1 | (Number) | Read card | ||
| *8 99 | Delete user – relay output 1 | 0-999 (user ID) | |||
| *8 99 | Delete user – relay output 2 | 0-999 (user ID) | |||
| *8 99 | Delete all users | ||||
| *1 05 | Activation time – relay output 1 | 0-99 (seconds) or ⏻ for toggle mode | (e.g., for 5 seconds) | 1 second | |
| *1 00 | Activation time – relay output 2 | 0-99 (seconds) or ⏻ for toggle mode | (e.g., for 5 seconds) | 1 second | |
| *5 05 | Activate/deactivate backlight | 2 = activate, 1 = deactivate | (backlight active) | ||
| *5 00 | Activate/deactivate sound signals | 3 = activate, 4 = deactivate | (sound signals active) | ||
| *2 02 | Activate/deactivate tamper protection | 2 = activate, 1 = deactivate | (tamper protection inactive) | ||
| *2 03 | Activate/deactivate tamper protection | 2 = activate, 1 = deactivate | (tamper protection inactive) | ||
| *2 04 | Activate/deactivate tamper protection | 2 = activate, 1 = deactivate | (tamper protection inactive) | ||
| *6 02 | Reset keypad to factory settings | *888## | |||
| *6 01 | Reset keypad to factory settings | *888## |
This publication was published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau, Germany (www.conrad.com). All rights reserved. Reproduction in any form, copying, microfilming, or storage using electronic data processing devices is prohibited without the written consent of the publisher. Reproduction in whole or in part is prohibited. This publication corresponds to the technical state of the devices at the time of printing. Copyright 2024 by Conrad Electronic SE.
*3214306_V2_0625_02_m_dm_prog_PL
