Sygonix RFID/Code Lock IP66 Programming Codes
Product: RFID/Code Lock IP66
Order Number: 3214306
Important!
All programming must be performed in programming mode. To enter programming mode, enter the master code twice in normal mode (default upon delivery: 1234).
To reset the master code to the factory setting, disconnect the code lock from the power supply. Press and hold the [enter] button and reconnect the code lock to the power supply. Continue to hold the [enter] button for another 3 seconds.
When the code lock emits a short beep and the right LED lights up green again, the master code has been reset.
| Programming Code | Programming Code | Configuration Function | Value | Input Format | Default Parameters |
|---|---|---|---|---|---|
| [4] [7] | [4] | Modify code length | 2-6 / 2-6 digits | [2] [0] - [2] [6] (e.g., for 2 digits) | 4 digits |
| [4] [7] | [7] | Program master transponder | Read card | [7] [7] | - |
| [4] [7] | [7] | Delete master transponder | Read card | [7] [7] | - |
| [4] [3] | - | Modify master code | Enter master code | [3] [3] | - |
| [4] [2] | [0] [1] | Program transponder card or user code for relay output 1 | 0-999 (User ID) | [4] [2] [0] [1] [0] [0] [0] - [9] [9] [9] (User ID) | Read card / User code |
| [4] [2] | [0] [2] | Program user code for relay outputs 1-2. Possible | 0-999 (User ID) | [4] [2] [0] [2] [0] [0] [0] - [9] [9] [9] (User ID) | Enter user code |
| [4] [2] | [0] [3] | Program transponder card and user code for relay output 1 | 0-999 (User ID) | [4] [2] [0] [3] [0] [0] [0] - [9] [9] [9] (User ID) | Read card / User code |
| [4] [2] | [0] [4] | Program transponder card or user code for relay output 2 | 0-999 (User ID) | [4] [2] [0] [4] [0] [0] [0] - [9] [9] [9] (User ID) | Read card / User code |
| [4] [2] | [0] [5] | Program user code for relay outputs 2-2. Possible | 0-999 (User ID) | [4] [2] [0] [5] [0] [0] [0] - [9] [9] [9] (User ID) | Enter user code |
| [4] [9] [0] [1] | [5] | Program multiple transponder cards for relay output 1 | 0-999 (User ID) | [4] [9] [0] [1] [0] [0] [0] - [9] [9] [9] (User ID) | Read card |
| [4] [9] [0] [1] | [5] | Program multiple transponder cards with consecutive serial numbers for relay output 1 | (number) | [4] [9] [0] [1] [0] [0] [0] - [9] [9] [9] (number) | All other transponders are automatically added. |
| [4] [9] [0] [2] | - | Delete user - relay output 1 | 0-999 (User ID) | [4] [9] [0] [2] [0] [0] [0] - [9] [9] [9] (User ID) | - |
| [4] [9] [0] [2] | - | Delete user - relay output 2 | 0-999 (User ID) | [4] [9] [0] [2] [0] [0] [0] - [9] [9] [9] (User ID) | - |
| [4] [9] [0] [8] | - | Delete all users | - | [4] [9] [0] [8] | - |
| [4] [0] [0] | - | Activation duration - relay output 1 | 0-99 (seconds), or [2] for communication mode | [4] [0] [0] [0] - [9] [9] (seconds), or [2] for communication mode | 1 second |
| [4] [0] [0] | - | Activation duration - relay output 2 | 0-99 (seconds), or [2] for communication mode | [4] [0] [0] [0] - [9] [9] (seconds), or [2] for communication mode | 1 second |
| [4] [2] [0] [2] | - | Activate/deactivate backlight | [2] = activate, [1] = deactivate | [4] [2] [0] [2] [2] (activate backlight), [4] [2] [0] [2] [1] (deactivate backlight) | Backlight activated |
| [4] [2] [0] [3] | - | Activate/deactivate audible signals | [3] = activate, [4] = deactivate | [4] [2] [0] [3] [3] (activate audible signals), [4] [2] [0] [3] [4] (deactivate audible signals) | Audible signals active |
| [4] [2] [0] [1] | - | Activate/deactivate anti-sabotage protection | [2] = activate, [1] = deactivate | [4] [2] [0] [1] [2] (activate anti-sabotage protection), [4] [2] [0] [1] [1] (deactivate anti-sabotage protection) | Anti-sabotage protection inactive |
| [4] [2] [0] [1] | - | Reset code lock to factory settings | - | [4] [2] [0] [1] | - |
