Manuals+

Sygonix RFID/Code Lock IP66 Programming Codes

Item no. 3214306

Important Information

All programming must be carried out in programming mode. Enter the master code twice in standby mode to activate the programming mode ("1234" by default).

To reset the master code to factory default, disconnect the code lock from the power supply.

Press and hold down the [enter] key to switch the power supply to the code lock back on. Press and hold down the [enter] key for three more seconds.

When the master code reset is complete, the code lock emits a short beep, and the right LED turns green.

Programming Codes Overview

Programming codeProgramming codeProgramming functionExplanationInput formatDefault setting
[7][7]Change the code length2-6 digits[7] [2-6] (e.g. for 2-digit codes)4 digits
[7][7]Programming the master transponder cardSwipe the card[7] [Swipe the card]-
[7][7]Delete the master transponder card-[7] [Swipe the card]-
[7][7]Changing the master codeEnter the master code[7] [Master code] [Master code]-
[5] [01][01]Configure the transponder card or user code for relay output #100-999 (User ID)[5] [01] [000-999] (User ID)-
[5] [02][02]Configure the user code for relay output #1 (second option)0-999 (User ID)[5] [02] [000-999] (User ID)-
[5] [03][03]Configure the transponder card and user code for relay output #10-999 (User ID)[5] [03] [Swipe the card/enter the user code]-
[5] [04][04]Configure the transponder card or user code for relay output #20-999 (User ID)[5] [04] [Swipe the card/enter the user code]-
[5] [05][05]Configure the user code for relay output #2 (second option)0-999 (User ID)[5] [05] [Enter the user code]-
[5] [10][10]Configure multiple transponder cards for relay output #100-999 (User ID)[5] [10] [Swipe the card/enter the user code]-
[5] [11][11]Configure multiple transponder cards with consecutive serial numbers for relay output #100-999 (User ID)[5] [11] [Swipe the card]-
[5] [12][12]Deleting a user - relay output #10-999 (User ID)[5] [12] [000-999] (User ID)-
[5] [13][13]Deleting a user - relay output #20-999 (User ID)[5] [13] [000-999] (User ID)-
[5] [14][14]Deleting all users-[5] [14] [Swipe the card]-
[2] [01][01]Activation time (relay output #1)0-99 (seconds) or [2] for toggle mode[2] [01] [00-99] (e.g. for 5 seconds) or [2] [01] [2] (toggle mode)1 second
[2] [02][02]Activation time (relay output #2)0-99 (seconds) or [2] for toggle mode[2] [02] [00-99] (e.g. for 5 seconds) or [2] [02] [2] (toggle mode)1 second
[2] [03][03]Enabling/disabling backlight[3] = activate, [4] = deactivate[2] [03] [3] (enable the keypad backlight) or [2] [03] [4] (disable the keypad backlight)Keypad backlight enabled
[2] [04][04]Enabling/disabling beep tones[3] = activate, [4] = deactivate[2] [04] [3] (enable beep tones) or [2] [04] [4] (disable beep tones)Beep tones enabled
[2] [05][05]Enabling/disabling tamper protection[2] = activate, [1] = deactivate[2] [05] [2] (enable tamper protection) or [2] [05] [1] (disable tamper protection)Tamper protection disabled
[8] [99][99]Resetting the code lock to factory defaults-[8] [99] [99]-

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited.

This publication reflects the technical status at the time of printing.

Copyright 2024 by Conrad Electronic SE.

Item no. 3214306_V2_0625_02_m_dm_prog_EN

Models: SY-6428612, 3214306 IP66 RFID code Lock, 3214306, IP66 RFID code Lock, RFID code Lock, code Lock, Lock

File Info : application/pdf, 1 Pages, 11.13MB

PDF preview unavailable. Download the PDF instead.

user-safety-instructions-3214306-sygonix-sy-6428612-rfid-keypad-surface-mount-12-v-dcac-24-v-dcac-ip66-backlit-keypad

References

Adobe PDF Library 17.0 Adobe InDesign 20.3 (Windows)

Related Documents

PreviewSygonix RFID/Code Lock IP66 Programming Codes Overview
This document provides an overview of the programming codes for the Sygonix RFID/Code Lock IP66, detailing configuration functions, input formats, and default parameters.
PreviewSygonix RFID/Codeslot IP66 Programming Codes Overview
This document provides an overview of the programming codes for the Sygonix RFID/Codeslot IP66, including functions, input methods, and default settings.
PreviewSygonix RFID/Codeschloss IP66 Programming Codes Overview
A comprehensive overview of the programming codes for the Sygonix RFID/Codeschloss IP66, detailing functions, values, input formats, and default settings for various operations like programming transponder cards, user codes, and managing device settings.
PreviewSygonix RFID/Codeschloss IP66 Bedienungsanleitung
Bedienungsanleitung für das Sygonix RFID/Codeschloss IP66, inklusive Funktionen, Montage, Anschluss und Programmierung.
PreviewSygonix RFID/Keypad IP66 Programming Guide
A guide to the programming codes and functions for the Sygonix RFID/Keypad IP66, including details on changing codes, managing transponder cards, and setting activation times.
PreviewSygonix RFID/Codeslot IP66 Gebruiksaanwijzing
Handleiding voor het Sygonix RFID/Codeslot IP66, inclusief installatie, programmering en veiligheidsinstructies.
PreviewSygonix RFID/Code Lock IP66 Programming Codes Overview
This document provides a comprehensive overview of the programming codes for the Sygonix RFID/Code Lock IP66, detailing functions, values, insertion modes, and factory settings for various programming operations.
PreviewSygonix RFID/Code Lock IP66 Operating Instructions
Comprehensive operating instructions for the Sygonix RFID/Code Lock IP66, detailing installation, programming, features, and safety guidelines.