Sygonix RFID/Code Lock IP66 Programming Codes Overview

Model Number: SY-6428612

Order Number: 3214306

Important Information

All programming must be performed in programming mode. To enter programming mode, enter the master code twice in normal mode (default: "1234").

To reset the master code to factory settings: disconnect the code lock from power. Press and hold the [#] key, then reactivate the power to the code lock. Continue holding the [#] key for another 3 seconds. When the code lock emits a short beep and the right LED turns green again, the master code has been reset.

Programming Code	Programming Code	Programming Function	Values	Insertion Mode	Factory Settings
[`#`] [9] [04]	[`#`] [04]	Modify code length	2 to 6 digits	[`#`] [04] [2] (e.g., for 2-digit codes)	4 digits
[`#`] [7]	[`#`] [7]	Programming of master transponder card	Read card	[`#`] [7] Read card	---
[`#`] [3]	[`#`] [3]	Delete master transponder card	---	---	---
[`#`] [1]	[`#`] [1]	Modify master code	Enter master code	[`#`] [1] Master code Master code	---
[`#`] [9] [01]	[`#`] [01]	Programming of transponder card or user code for relay output No. 1	0-999 (User ID)	[`#`] [01] [0] - [9] [9] [9] (User ID)	Read card/User code
[`#`] [9] [02]	[`#`] [02]	Programming of user code for relay output No. 1 - 2. Option	0-999 (User ID)	[`#`] [02] [0] - [9] [9] [9] (User ID)	Enter user code
[`#`] [9] [03]	[`#`] [03]	Programming of transponder card or user code for relay output No. 1	0-999 (User ID)	[`#`] [03] [0] - [9] [9] [9] (User ID)	Read card/User code
[`#`] [9] [05]	[`#`] [05]	Programming of user code for relay output No. 2 - 2. Option	0-99 (User ID)	[`#`] [05] [0] - [9] [9] (User ID)	Enter user code
[`#`] [9] [1]	[`#`] [1]	Programming of multiple transponder cards for relay output No. 1	0-999 (User ID)	[`#`] [1] [0] - [9] [9] [9] (User ID)	Read cards in succession
[`#`] [9] [2]	[`#`] [2]	Programming of multiple transponder cards with progressive serial numbers for relay output No. 1	0-999 (User ID)	[`#`] [2] [0] - [9] [9] [9] (User ID)	1 card read
[`#`] [4]	[`#`] [4]	Delete user: relay output No. 1	0-999 (User ID)	[`#`] [4] [0] - [9] [9] [9] (User ID)	All other transponders are automatically added.
[`#`] [9] [4]	[`#`] [4]	Delete user: relay output No. 2	0-99 (User ID)	[`#`] [9] [4] [0] - [9] [9] (User ID)	---
[`#`] [3] [1]	---	Delete all users	---	---	---
[`#`] [8] [1]	---	Activation time: relay output No. 1	0-99 (seconds) or [`00`] for toggle mode	[`#`] [05] [1] (e.g., for 5 seconds) or [`#`] [05] [00] (toggle mode)	1 second
[`#`] [8] [2]	---	Activation time: relay output No. 2	0-99 (seconds) or [`00`] for toggle mode	[`#`] [05] [2] (e.g., for 5 seconds) or [`#`] [05] [00] (toggle mode)	1 second
[`#`] [2] [1]	[`#`] [2] [1]	Activate/Deactivate backlight	[`2`] = activation [`1`] = deactivation	[`#`] [2] [2] (backlight activation) [`#`] [2] [1] (backlight deactivation)	Backlight active
[`#`] [2] [3]	[`#`] [2] [3]	Activate/Deactivate acoustic signals	[`3`] = activation [`4`] = deactivation	[`#`] [2] [3] (acoustic signal activation) [`#`] [2] [4] (acoustic signal deactivation)	Acoustic signals active
[`#`] [2] [0]	[`#`] [8] [0]	Activate/Deactivate anti-tamper protection	[`2`] = activation [`1`] = deactivation	[`#`] [2] [0] (anti-tamper protection activation) [`#`] [8] [0] (anti-tamper protection deactivation)	Anti-tamper protection not active
[`#`] [3] [2]	[`#`] [3] [2]	Reset code lock to factory settings	---	---	---

This is a publication from Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights, including translation, are reserved. Reproduction of any kind, such as photocopying, microfilming, or storage in electronic data processing equipment, is prohibited without the written permission of the publisher. Summarized reproduction is also prohibited. The publication is up to date at the time of printing.

Document Version: 3214306_V2_0625_02_m_dm_prog_IT

	Sygonix RFID/Keypad IP66 Programming Guide A guide to the programming codes and functions for the Sygonix RFID/Keypad IP66, including details on changing codes, managing transponder cards, and setting activation times.
	Sygonix RFID/Code Lock IP66 Programming Codes Overview This document provides an overview of the programming codes for the Sygonix RFID/Code Lock IP66, detailing configuration functions, input formats, and default parameters.
	Sygonix RFID/Codeslot IP66 Programming Codes Overview A comprehensive overview of programming codes for the Sygonix RFID/Codeslot IP66, detailing functions, values, input methods, and default settings for various operations like changing code length, programming transponder cards, and managing user access.
	Sygonix RFID/Code Lock IP66 Operating Instructions Comprehensive operating instructions for the Sygonix RFID/Code Lock IP66, detailing installation, programming, features, and safety guidelines.
	Sygonix RFID/Code Lock IP66 Operating Instructions Comprehensive operating instructions for the Sygonix RFID/Code Lock IP66, detailing installation, programming, features, and safety guidelines for secure access control.
	Sygonix RFID/Codeschloss IP66 Programming Codes Overview A comprehensive overview of the programming codes for the Sygonix RFID/Codeschloss IP66, detailing functions, values, input formats, and default settings for various operations like programming transponder cards, user codes, and managing device settings.
	Sygonix RFID/Code Lock IP66 Programming Codes Overview A comprehensive guide to the programming codes for the Sygonix RFID/Code Lock IP66, detailing functions, input formats, and default settings for various operations.
	Sygonix RFID/Serrure à code IP66 - Mode d'emploi et Guide d'installation Manuel d'utilisation complet pour la serrure à code RFID Sygonix IP66. Ce guide couvre l'installation, la programmation, l'utilisation et le dépannage de ce dispositif de sécurité avancé.

Important Information

Related Documents