Moen IVER™ M-CORE™2-Series Single-Handle Tub/Shower Trim
Specifications and Product Information
Description
- Metal construction with various finishes identified by suffix.
- Shower Only kits include showerhead, arm, flange, escutcheon, and handle.
- Tub/shower kits include showerhead, arm, flange, escutcheon, handle, and diverter spout.
Operation
- Handle operates counterclockwise through a 150° arc, with the 'off' position at 6 o'clock and maximum hot water at the 1 o'clock position. Shut off is in the clockwise direction.
- Adjustable temperature limit stop to control maximum hot water temperature.
- Pressure balancing mechanism maintains selected discharge temperature to +/- 3.6°F (+/- 2°C).
Flow
- EP suffix models feature a showerhead limited to 1.75 gpm (6.6 L/min).
- NH suffix models do not include a showerhead.
Cartridge
- 1212 cartridge design.
- Non-metallic/non-ferrous and plastic material.
- Accommodates back-to-back installations.
Standards
- Third-party certified to ASME A112.18.1/CSA B-125-1, ASSE 1016/ASME A112.1016/CSA B.125.16, and all applicable requirements referenced therein.
- Moen's M-CORE™ pressure balance system is capable of meeting the pressure and temperature variation requirements of ASSE 1016/ASME A112.1016/CSA B125.16 when tested as low as 1.3 gpm (4.9 L/min).
- EP suffix models are third-party certified to EPA WaterSense®.
- [ADA compliant] for lever handle.
Warranty
- Lifetime limited warranty against material or manufacturing defects to the original homeowner.
- 10-year limited warranty when used in a multifamily installation.
- 5-year limited warranty when used in a commercial installation.
Visit www.moen.com/support for complete details and limitations.
Product Details
Models
- UT2571 Series - Valve Trim Only
- UT2572EP/NH Series - Shower Trim Only
- UT2583EP/NH Series - Tub/Shower Trim
Valves
U140 series, U130 series
[ADA compliant] [WaterSense certified] [M-PACT technology]
Diagrams and Dimensions
Diagram 1: Shower Head and Valve Trim Assembly
Illustrates the components of a tub/shower trim kit, including a shower head, shower arm, flange, escutcheon plate, and a single-handle valve control.
Diagram 2: Side View Installation Dimensions
Shows a cross-section of the trim installed on a finished wall. Key dimensions include:
- Shower head to finished wall: 7-1/2" (190mm)
- Maximum wall thickness accommodated: 1" (25mm)
- Handle center height from valve: 3" (77mm)
- Escutcheon plate width: 4-1/2" (114mm)
- Escutcheon plate height: 5-5/8" (142mm)
- Valve rough-in to finished wall: 3-1/2" (88mm)
- Overall depth from finished wall to shower head face: 7-7/8" (200mm)
- Shower arm length: 7" (178mm)
Diagram 3: Shower Head Front View Dimensions
Depicts the shower head from the front, showing its diameter: 2-1/2" (64mm).
Diagram 4: Escutcheon Plate Dimensions
Details the dimensions of the escutcheon plate:
- Height: 5-5/8" (142mm)
- Width: 4-1/2" (114mm)
- Handle connection point height from bottom of plate: 6" (152mm)
- Handle connection point height from top of plate: 2-3/4" (71mm)
