RÅDMANSÖ 5-Drawer Chest Assembly Instructions

Safety First: Preventing Furniture Tip-Over

⚠️ WARNING: Children have died from furniture tip-over. To reduce the risk of furniture tip-over:

• ALWAYS install the anti-tip device provided. ✔️
• NEVER put a TV on this product. ❌
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ❌
• NEVER open more than one drawer at a time. ❌
• Place heaviest items in the lowest drawers.

(Safety information is also provided in French and Spanish.)

Assembly Instructions

Overview of Tools and Hardware

Before you begin, gather the necessary tools:

• Screwdrivers (Phillips and flathead) ?
• Hammer ?
• Drill ड्रिल

Required drill bit sizes:

• 8 mm (5/16")
• 3 mm (1/8")

The document illustrates various hardware components, including:

• Dowels: 30x, 5x, 4x
• Cam bolts: 8x
• Cam locks: 4x
• Screws: Various types and quantities (e.g., 4x, 5x, 6x, 2x, 1x)
• Brackets and supports
• Drawer runners (labeled CL, CR, DL, DR)
• Legs
• Anti-tip hardware

Part numbers are often shown in diagrams, e.g., 159553, 10109447, 119976, 117434, 10047245, 10040242, 118740, 101345, 105251, 100001, 10120564, 10003283, 10121698, 10114605, 10075382, 10047244, 190459, 10095994, 10114407, 109572, 10087223, 158701, 151931, 126916, 371503.

Step 1: Base Frame Assembly

Assemble the base frame. Attach side panels to base panels using dowels (15x) and cam locks (15x). Part numbers like 10047245 are associated with these connections.

Step 2: Attaching Drawer Runners to Side Panels

Attach drawer runners (CL/CR) to the inside of the side panels using screws (4x).

Step 3: Attaching Support Brackets

Attach support brackets to the side panels using screws (2x). Ensure correct orientation (avoiding the incorrect method ❌).

Step 4: Attaching Mounting Brackets

Secure mounting brackets to the side panels using screws and washers.

Step 5: Inserting Back Panels

Slide the back panels into the grooves of the assembled frame until they click into place.

Step 6: Attaching Second Side Panel

Attach the second side panel to the structure.

Step 7: Attaching Top Panel

Attach the main top panel using dowels (2x), referencing part number 118740.

Step 8: Placing Top Panel

Position the top panel onto the cabinet structure.

Step 9: Securing Top Panel

Secure the top panel using screws (2x) and cam locks (part numbers 105251, 100001 are shown).

Step 10: Attaching Top Surface Panels

Attach the top surface panels using dowels (2x), referencing part number 118740.

Step 11: Inserting Back Support Panels

Insert the back support panels into their designated slots.

Step 12: Securing Back Panels

Fasten the back panels to the main cabinet structure using screws (6x), referencing part number 105251.

Step 13: Attaching Legs

Attach the legs to the base frame using bolts and washers (4x). Ensure correct bolts are used (e.g., 100001, 10003283, 10114407 are shown, avoid incorrect type ❌).

Step 14: Attaching Horizontal Supports

Install horizontal support bars onto the side panels using bolts and washers (4x), referencing part number 10120564.

Step 15: Attaching Bottom Structure

Connect the bottom support structure to the main cabinet using bolts and washers (4x), referencing part numbers 10114605 and 10121698.

Step 16: Attaching Internal Shelf

Install the internal shelf or divider.

Step 17: Placing Top Decorative Piece

Place the top decorative piece onto the cabinet.

Step 18: Final Tightening

Ensure all screws and bolts are securely tightened.

Step 19: Drawer Assembly

Assemble the drawers. This involves attaching drawer runners (2x) to the drawer boxes.

Step 20: Inserting Drawers

Slide the assembled drawers into the cabinet.

Wall Mounting Instructions

For safety, it is crucial to secure the furniture to the wall using the provided anti-tip device.

• For solid walls (A): Use the supplied screws and plugs. Drill holes of appropriate size and insert plugs before screwing.
• For hollow walls (B): Use the supplied screws and plugs. Ensure plugs are suitable for hollow wall types.
• For solid wood (C): Use the supplied screws without plugs.

Refer to the diagrams for specific drill bit sizes (e.g., 8 mm for 5/16" screws, 3 mm for 1/8" screws) and recommended drilling depths (e.g., 70 mm for larger screws, 30 mm for smaller screws).

Step 21: Installing Anti-Tip Strap

Attach one end of the anti-tip strap to the furniture (usually at the top back) and the other end securely to the wall, following the instructions and using appropriate wall fixings.

Step 22: Attaching Drawer Fronts

Attach the drawer fronts to the assembled drawer boxes.

Step 23: Attaching Drawer Handles

Install the drawer handles or knobs onto the drawer fronts.

Step 24: Drawer Runner Installation (Cabinet Side)

Attach the corresponding drawer runners to the inside of the cabinet sides.

Step 25: Drawer Box Assembly

Assemble the drawer boxes by connecting the sides to the drawer base.

Step 28: Final Drawer Runner Attachment

Attach the drawer runners (DL/DR) to the drawer box sides.

Step 29: Attaching Drawer Front to Box

Securely attach the drawer front to the assembled drawer box.

Step 30: Final Check

Perform a final check of all connections. Be mindful when opening drawers, especially if the unit is not fully loaded or secured.