Progress Lighting Preston Bath Vanity Light Installation and Assembly Guide

Product Details

Models Included:

• P300426: 1-LT BATH BRACKET
• P300427: 2-LT BATH BRACKET
• P300428: 3-LT BATH BRACKET
• P300429: 4-LT BATH BRACKET

This guide provides comprehensive instructions for the installation and assembly of various models within the Progress Lighting Preston collection of bath vanity lights.

Package Contents

Before commencing installation, please verify that all listed parts are present. Refer to the diagrams for visual confirmation.

Visual representations of the fixture components are provided, detailing the different light configurations available.

Hardware Contents (not actual size)

The necessary hardware for installation includes screws, wire nuts, a round mounting plate, hex nuts, and cylinder nuts, as depicted in the diagrams.

Safety Information

Important Precautions:

• Please read and understand this entire manual before attempting to assemble, operate, or install the product.
• CAUTION: Read instructions carefully and turn electricity off at the main circuit breaker panel before beginning installation.
• CAUTION: Risk of fire. Use minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
• CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.

Preparation

Before You Begin:

• Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install, or operate the product.
• Estimated assembly time: 30 minutes.
• Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.

Care and Maintenance

Cleaning Instructions:

• Shut off main power supply before cleaning product or changing light bulbs.
• To clean, wipe with a damp cloth.
• Do not use abrasive cleaners or cleaners that contain alcohol.

Assembly Instructions

Step 1: Prepare Mounting Plate

• Loosely thread the screws (AA) and the hex nuts (DD) onto the round mounting plate (CC). Adjust the screw length according to the fixture canopy depth.
• Attach this assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
• Lift the fixture to the mounting surface and pass the screws (AA) through the two mounting holes in the fixture canopy. While holding the fixture, thread the screws (AA) in or out of the round mounting plate (CC) until approximately 3/16" [5mm] of threads are showing. This adjustment ensures proper mounting.
• Next, take the fixture down and go back and tighten the hex nuts (DD) up against the round mounting plate (CC) to secure the correct thread length for mounting.

Diagrams illustrate the process of assembling the mounting plate with screws and nuts, and adjusting the screw length for the fixture canopy.

Step 2: Wiring the Fixture

• Strip approximately 3/8" of insulation from the electrical wire ends.
• Using wire nuts (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box.
• Connect the BLACK fixture wire to the BLACK supply wire from the outlet box.
• Connect the fixture ground wire (bare copper or green) and the supply ground wire (bare copper or green) using a wire nut (BB) or by fastening to the ground screw on the round mounting plate.
• Push all wire connections carefully into the outlet box.

Diagrams show the correct wiring connections: white fixture wire to white supply wire, black fixture wire to black supply wire, and ground wire to ground connection, all secured with wire nuts.

Step 3: Mount the Fixture

• Slide the fixture's mounting holes over the screws (AA) that are now protruding from the mounting plate.
• Using the cylinder nuts (EE), tighten the fixture securely against the mounting surface.
• Note: The fixture can be mounted in either an upward or downward orientation.

Diagrams show the fixture being aligned with the mounting screws and then secured using cylinder nuts.

Step 4: Attach Glass Shades

• Attach the glass shades (B) to the fixture (A).
• Use the socket rings (C) to secure the glass shades, tightening them modestly.

Diagrams illustrate the process of attaching the glass shades to the fixture and securing them with the provided socket rings.

Step 5: Install Lamps

• Thread the lamps (not included) into the fixture sockets.
• Use 100-watt MAX incandescent medium base lamps, SBCFL, or SBLED bulbs.

Diagrams show the final step of screwing the light bulbs into the fixture sockets.

Warranty Information

Limited Warranty:

Progress Lighting products, when properly installed and under normal conditions of use, are warranted to be free from defects in material and workmanship at the time of shipment. All warranty claims must be asserted within one year from the date of purchase of the subject items; thereafter, warranty claims will not be honored. Customers' sole remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to have been defective in material or workmanship at time of shipment. Progress's sole and maximum liability for a defective product shall never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In no event shall Progress be liable to the customer for any damages, whether incidental or consequential, beyond the cost to the customer of the subject product. Customer is responsible for determining the suitability of Progress products for customer's use or resale, or for incorporating them into objects or applications which customer designs, assembles, constructs, or manufactures.

Support Information

For questions regarding product information, assembly, or missing parts, please contact Progress Lighting:

• Phone: 800-447-0573
• Email: customerservice@progresslighting.com
• Hours: 8am-8pm (Eastern), Monday-Friday