SÖDERBODA Dishwasher Installation Guide
Brand: IKEA
Model: SÖDERBODA
Important Safety Information
⚠️ Warning! Before proceeding with installation, read the safety information in the User Manual.
This document is available in multiple languages, including:
- English
- German
- French
- Italian
- Danish
- Norwegian
- Finnish
- Swedish
- Icelandic
- Portuguese
- Spanish
- Greek
- Dutch
- Polish
- Turkish
- Russian
- Slovak
- Lithuanian
- Czech
- Hungarian
- Bulgarian
- Romanian
- Croatian
- Serbian
- Slovenian
- Estonian
- Latvian
- Ukrainian
- Arabic
General Installation Guidance
Observe the following general guidelines during installation:
Illustration 1: Two figures are shown. The first figure, with a red cross over it, depicts stacked items that are unstable. The second figure shows two people correctly assembling items. This illustrates the importance of stable assembly and avoiding precarious stacking.
[Do not stack items precariously. Assemble items correctly.]
Illustration 2: The first part shows a figure with a red cross over a wet surface. The second part shows a figure assembling an item on a rug. This indicates that assembly should be done on a dry, protected surface.
[Avoid placing items on wet surfaces. Assemble on a stable, protected surface.]
Illustration 3: The first part shows a figure with a question mark, indicating uncertainty. The second part shows a figure interacting with an IKEA store. This suggests seeking assistance or consulting IKEA if unsure about any step.
[Seek assistance if unsure. Refer to IKEA for support.]
Illustration 4: The first part shows a figure with a red cross over plumbing connections. The second part shows a figure working with plumbing tools and connections. This emphasizes the need to follow correct plumbing procedures and ensure secure connections.
[Follow proper plumbing procedures. Ensure correct connections.]
Parts and Tools Required
Ensure you have the following parts and tools before starting:
Tools:
- Screwdriver
- Spirit level
- Scissors
- Drill
- Gloves
Parts:
- Part A: 2x
- Part B: 4x
- Part C: 1x
- Part D: 4x
- Part E: 3x
- Part F: 1x
- Part G: 1x
- Part H: 1x
- Part I: 1x
Installation Dimensions
The appliance requires specific dimensions for installation:
- Height: 880-885 mm
- Depth: Minimum 580 mm
- Width: 600 mm
Connection hoses should not exceed a maximum length of 100 cm.
Appliance Dimensions
- Width: 598 mm
- Depth: 580 mm
- Height: 815 mm
Step-by-Step Installation
Step 1: Prepare the Base
Place the base unit (Part I, 600 mm length) into position.
[Place base unit (I, 600mm) into position.]
Step 2: Position the Appliance
Position the appliance within the designated cabinet space, which is typically 600 mm wide.
[Position appliance within the 600mm cabinet space.]
Step 3: Adjust Appliance Height (Initial)
Adjust the appliance height to be approximately 23 mm less than the cabinet height (X-23mm). Use the adjustable feet and secure with screws (X2).
[Adjust appliance height to X-23mm. Secure with screws (X2).]
Step 4: Fine-tune Foot Adjustment
Adjust the feet further to achieve the correct height, approximately 30 mm of thread visible.
[Adjust feet to approximately 30mm thread exposure.]
Step 5: Secure the Appliance
Secure the appliance using Part E. Ensure correct lifting technique is used, as shown in the illustration (avoid lifting incorrectly).
[Secure appliance with Part E. Use correct lifting technique.]
Step 6: Adjust Appliance Height (Final)
Make final height adjustments, ensuring the appliance is X-3mm from the top. Use M6 screws for adjustment.
[Adjust appliance height to X-3mm using M6 screws.]
Step 7: Attach Mounting Brackets
Attach the left (L) and right (R) mounting brackets using Part C.
[Attach mounting brackets (L, R) using Part C.]
Step 8: Connect Brackets to Appliance
Connect the prepared mounting brackets to the sides of the appliance.
[Connect mounting brackets to the appliance.]
Step 9: Attach Brackets to Cabinet
Attach the mounting brackets to the interior of the kitchen cabinet.
[Attach mounting brackets to the cabinet interior.]
Step 10: Secure Appliance to Cabinet
Secure the appliance to the cabinet using Part D.
[Secure appliance to cabinet using Part D.]
Step 11: Slide Appliance into Cabinet
Carefully slide the appliance into its final position within the cabinet. Ensure it moves smoothly without forcing. The illustration shows correct placement within the cabinet, avoiding incorrect positioning.
[Slide appliance into cabinet. Ensure correct placement and avoid forcing.]
Step 12: Secure with Screws (B)
Secure the appliance further to the cabinet using Part B screws.
[Secure appliance to cabinet using Part B screws.]
Step 13: Additional Securing with Screws (B)
Continue securing the appliance to the cabinet using Part B screws.
[Continue securing appliance to cabinet using Part B screws.]
Step 14: Final Securing with Parts (A)
Complete the securing process by attaching Part A to the appliance and cabinet.
[Complete securing appliance to cabinet using Part A.]
Water and Electrical Connections
Connect the water supply and drain hoses, and the electrical power.
Water Inlet Connection
Connect the water inlet hose using Part F. Ensure the connection is made to a 3/4" water tap. The water pressure should be between 0.3-10 bar.
[Connect water inlet hose using Part F to a 3/4" tap. Water pressure: 0.3-10 bar.]
Water Outlet Connection
Connect the drain hose to the drainage system. Secure the drain hose with clamp G.
[Connect drain hose and secure with clamp G.]
Electrical Connection
Plug the appliance's power cord into a suitable electrical outlet.
[Plug power cord into electrical outlet.]
