Minelab Equinox 700 & 900 Metal Detectors: Getting Started Guide
Introduction
Welcome to the Minelab Equinox 700 and Equinox 900 series of metal detectors. This guide provides essential steps to get you started quickly with your new device. For comprehensive details, please refer to the full user manual available online.
What's Included
Your Equinox package typically contains the following items:
- ? Detector Control Pod
- ? Shaft Sections (Lower, Middle, Upper)
- ? Coil with Skidplate
- ? Charging Cable
- ? Getting Started Guide (this document)
- ? Wireless Headphones (may vary by bundle)
Assembly
Assemble your detector by following these steps:
- Attach the coil to the lower shaft. Ensure it is securely fastened.
- Slide the middle shaft into the upper shaft and adjust to your preferred length.
- Connect the upper shaft assembly to the lower shaft, ensuring the locking mechanism clicks into place.
- Route the coil cable neatly along the shaft and plug it into the control pod.
Tip: Adjust the shaft length so the control pod rests comfortably near your hand when the coil is on the ground.
Charging the Battery
Before first use, fully charge the detector's internal battery.
- Connect the provided charging cable to the charging port on the control pod. ?
- Connect the other end of the cable to a USB power source (e.g., wall adapter, power bank).
- The battery indicator light will show charging status. A full charge is indicated when the light turns solid green or turns off (refer to full manual for exact indicator). ?
Note: Charging time is approximately 3-4 hours.
Basic Operation
Power on the detector by pressing and holding the power button. ▶️
Modes
The Equinox features multiple search modes optimized for different environments:
- All-Metal: Detects all types of metal targets.
- Park: Suitable for general use in parks and areas with trash.
- Field: Designed for detecting coins and relics in various fields.
- Beach: Optimized for wet and dry sand conditions.
Use the mode buttons to cycle through available modes. ⚙️
Sensitivity and Volume
Adjust sensitivity to optimize detection depth and stability. Adjust volume for comfortable listening. ?
Target Identification (TID)
The screen displays a numerical Target ID (TID) and audio tones to help identify the type of metal detected. ?
Safety Precautions
Always be aware of your surroundings. ⚠️
- Do not operate near high-voltage power lines.
- Be mindful of underground utilities.
- Respect private property and local regulations.
- Wear appropriate footwear and clothing.
Further Information
For advanced features, troubleshooting, and detailed specifications, please download the full user manual from the Minelab website.
