Minelab Equinox 700/900 Quick Start Guide
Introduction
This Quick Start Guide and the full User Manual for EQUINOX® are available to download online.
Get these languages and more:
DE Deutsch, EN English, ES Español, FR français, JP 日本語, KR 한국어, PT Português, RU русский, ZH 中文
Quick Start
- ? Power On
- ⚙️ Select Search Mode
- ? Noise Cancel
- ▶️ Start Detecting
Search Modes
Ideal for recreational areas with lots of trash, including more general detecting.
Ideal for detecting in historical fields for a wider range of target sizes.
For all saltwater conditions: dry sand, wet sand, surf and underwater.
For prospecting gold nuggets in mineralized goldfield locations.
Additional modes include:
* For EQUINOX 900 only
Assembly
SECURE THE DETENT LOCKS
Adjust the detent locks if the telescopic extension slides or loosens.
- Release
- Tighten gently in increments
- Secure
- Check and repeat if necessary
Visual description of assembly steps: The detector is shown in several pieces. Step 1 shows the lower shaft being inserted into the main body. Step 2 shows the coil being attached to the lower shaft. Step 3 shows the control box being attached to the upper shaft. Step 4 shows the armrest being attached. Step 5 shows the strap being adjusted. Step 6 shows the coil cable being wrapped around the shaft. Step 7 shows the complete assembled detector.
Charging
5-6 HOURS
Charge your detector with a good quality USB charger that has a minimum charge capacity of 2A @ 5V. There is a risk of USB charger failure if a low-quality charger is used. Look for the following marks on USB chargers: CE, EALED, Intertek.
3 HOURS
Visual description of charging: A diagram shows a USB-A port and a USB-C port on a charger, connecting to the detector and headphones respectively. The detector charging indicator LED is shown as green.
Controls and Display
⚠️ Beach Overload Indicator
? Charge Status LED
? Battery/Charge Level
? Flashlight
? Power On/Off
? Backlight
?️ Discrimination Scale
Press button: ? Backlight
Press and hold: ? Flashlight
⬆️ Sensitivity Level
?️ Frequency Indicator
? Location Indicator (Pinpoint)
? Search Modes
➖➕ Sensitivity and Settings Adjustment (Less/More)
? Search Mode
? All Metal
? Pinpoint/Detect
? Target ID Number
? Vibration Indicator
? Headphone Indicator
? Wireless Audio Indicator
? Ground Balance Tracking Indicator
Press button: toggle ? wireless audio
Press and hold: ? wireless audio pairing
? User Profile*
? Target Depth Indicator
Settings
Press button to cycle through settings:
- ? Noise Cancel
- ? Ground Balance
- ? Volume Adjust
- ? Background Tone
- ? Target Tone
- ✔️❌ Accept/Reject
- ⚡ Recovery Speed
Advanced Settings
Press and hold button to toggle advanced settings:
- ?? Tone Volume
- ? Threshold Tone*
- ? Tone Signal
- ? Tone Shift
- ?? Iron Bias
- ?️ Frequency
* For EQUINOX 900 only
